Hardware Category - Page 566 of 1070 - CNX Software

March 7, 2018 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

ASUS PRIME J4005I-C Gemini Lake Mini-ITX Motherboard is Selling for around 80 Euros

Slowly but surely we are starting to see some Intel Gemini Lake products for sale / pre-order such as Intel June Canyon NUC Mini PC/Kits, or Jumper EBook X1 laptop, and if are based in Europe, it’s now possible to purchase ASUS PRIME J4005I-C mini-ITX motherboard for under 80 Euros. The motherboard is equipped with an Intel Celeron J4005 dual core processor, two U-DIMM slots for up to 8GB RAM, SATA and mSATA for storage, HDMI/RGB/LVDS ports, Gigabit Ethernet, and more. ASUS PRIME J4005I-C specifications: SoC – Intel Celeron J4005 dual core processor @ 2.0 / 2.7 GHz with Intel UHD Graphics 600 up to 700 MHz; 10W TDP System Memory – 2x U-DIMM sockets up to 8GB DDR4 2400/2133 MHz Non-ECC, Un-buffered Memory Storage 2x SATA 6Gb/s ports 1x M.2 Socket with M Key, type 2260/2280 storage devices support (PCIe mode) 128 Mb Flash ROM for UEFI AMI BIOS […]

March 6, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Innocomm WB10 NXP i.MX8M Quad SoM Comes with WiFi, Bluetooth, and Ethernet Connectivity

Taiwan based Innocomm Mobile Technology has been working on their own NXP i.MX 8M quad core system-on-module – namely WB10 – which includes a wireless module with WiFi and Bluetooth, as well as a Gigabit Ethernet transceiver. The module connects to the carrier board through three 80-pin board-to-board connectors exposing many of the I/Os provided by the latest NXP processor. WB10 module specifications: SoC – NXP i.MX8M Quad processor with 4x Cortex A53 cores, 1x Cortex-M4F core, and a Vivante GC7000Lite GPU System Memory – 2GB LPDDR4-3200 Storage – 8GB eMMC flash Connectivity Gigabit Ethernet transceiver Wireless module supporting 802.11 a/b/g/n/ac 2×2 MIMO WiFi, Bluetooth 4.2, two u.FL antenna connectors on-module Power Management & Audio Codec – ROHM PMIC 3x 80-pin board-to- board (1.27mm pitch) connectors exposing: Display Interfaces – HDMI 2.0a with support for 4K HDR, MIPI DSI Audio Interfaces – 4x SAI, S/PDIF Rx/Tx, DSD512 Camera Interfaces – […]

March 6, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Arm Introduces Mali-G52 & Mali-G31 GPUs, Mali-D51 Display Processor, and Mali-V52 Video Processor for Mainstream Devices

Arm has just announced four multimedia Mali IP blocks to be found in SoC for mainstream devices: Mali-G52 GPU with 30% faster performance over Mali-G51, and 3.6x better machine learning performance Mali-G31 GPU that’s 20% smaller, and 20% more efficient than Mali-G51, supports OpenGL ES 3.2 and Vulkan APIs Mali-D51 display processor 30% power saving, 50% lower latency compared to Mali-DP650 Mali-V52 video processor supporting 4K60/4K120 content Mali-G52 GPU Arm may have introduced Project Trillium for object detection and machine learning a few weeks ago, but the solution is better suited to premium devices, so the company’s Mali-G52 bitfrost mainstream GPU aims to fill the void for mid-range devices with up to 3.6 times faster machine learning capability over Mali-G51. Based on the first illustration, Mali-G52 will probably be coupled with DynamIQ Cortex A75/A55 processors. Other benefits of the new GPU include 30% more performance density, and 15% better energy […]

March 6, 2018March 6, 2018 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

C.H.I.P, PocketCHIP & Voder’s Maker Next Thing Co. Is Still Up and Running (Correction)

[Update: Next Thing Co. CEO (Dave) contacted me to inform me the company was not closed, but there was just several unfortunate events: DNS problem with the site leading to the blog issue Next Thing Co Facebook page was closed months ago (due to too many requests from different sources) The Google Maps listing is not managed by Next Things Co themselves. I’ve left the rest of the post unchanged. (except the last sentence) ] Next Thing Co. introduced the $9 C.H.I.P computer powered by Allwinner A13/R8 in 2015, and worked with Free Electrons (now Bootlin) to bring mainline Linux to the platform. They also launched PocketCHIP portable Linux game console based on the module, and lateron introduced C.H.I.P Pro WiFi + BLE module based on Allwinner GR8 processor, and found in their Voder (previously Dashbot) car dashboard assistant. I’m actually still using a C.H.I.P board as a printer server, […]

March 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

CUBOT X18 Plus 4G Smartphone Sells for as Low as $79.99 (Promo)

If you are on the lookout for an inexpensive 4G phone, Cubox X18 Plus smartphone with a Mediatek MT6750T processor running Android 8.0, a 6″ display, 4GB RAM, and 64GB flash may be worth a look as GearBest offers the device for as low as $79.99 shipped. The trick is that it is a flash sale with only the first 10 units sold at 9:00 UTC on March 5-9 (50 units in total), so you’d have to be fast and lucky to get it at that price. If you miss the flash sale, promo price is $129.99 until March 12. CUBOT X18 Plus smartphone: SoC – Mediatek MT6750T Octa-core (4+4) processor @ up to 1.5GHz with Arm Mali-T860 MP2 GPU System Memory – 4GB RAM Storage – 64GB eMMC flash, micro SD card slot up to 256GB Display – 5.99″ 2160×1080 touchscreen display Camera – 20+2MP dual rear camera with AF […]

March 5, 2018April 24, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Jumper EZBook X1 is a Gemini Lake Laptop Powered by Intel Celeron N4100 Quad Core Processor

We has seen several announcements for products based on the latest Intel Gemini Lake processors at CES 2018 and after with devices such as ASRock J4105-ITX motherboard, or ECS LIVA Z2 mini PC, as well as some leaks for Gemini Lake laptops, but so far I could not find any devices sold on Chinese online sellers like Aliexpress or GearBest. Today, I’ve just found out there’s at least on Gemini Lake devices on Aliexpress: Jumper EZBook X1 laptop with a 11.6″ touchscreen display, Intel Celeron N4100 processor, 4GB RAM, and 64GB storage. Jumper EZBook (Yoga) X1 specifications: SoC – Intel Celeron N4100 quad core Gemini Lake processor @ 1.10 GHz / 2.40 GHz (Turbo) with Intel UHD graphics 600 ; 6W TDP System Memory – 4GB DDR4 Storage – 64GB eMMC flash, micro SD card slot up to 128 GB Display – 11.6″ FHD (1920×1080) IPS touchscreen display Video Output – […]

March 5, 2018March 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

OpenEmbed Launches $99 em3399 Rockchip RK3399 SoM, and a Compact Evaluation Kit

Looking for a system-on-module based on Rockchip RK3399 processor? So far, you had at least four options with either edge connectors or castellated holes: Theobroma RK3399-Q7 (Qseven) SoM, 9Tripod X3399 core, Boardcon PICO3399 CPU module, or Firefly-RK3399 CoreBoard. OpenEmbed now offers another RK3399 system-on-module with their em3399 SoM using board-to-board connectors interfacing with the carrier board. OpenEmbed em3399 system-on-module specifications: SoC – Rockchip RK3399 hexa-core processor with 2x Cortex-A72 cores, 4x Cortex-A53 cores, and a Arm Mali-T860MP4 GPU System Memory – 2GB or 4GB DDR3L RAM Storage – 16GB to 128GB eMMC 5.1 flash Connectivity – Gigabit Ethernet transceiver (Atheros AR8033) Power Management – Rockchip RK808D PMIC 2x 120-pin board-to-board connectors (0.8mm pitch) with: Display: HDMI 2.0 port with audio for up to 4K @ 60Hz DisplayPort 1.2 with audio for up to 4K @ 60Hz MIPI-DSI (dual-channel) at up to 2560×1600 @ 60 Hz eDP 1.3 (4-lane) Camera – […]

March 5, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

SECO Unveils SM-C12 SMARC 2.0 Compliant i.MX8M Module, CSM-B79 SMARC 2.0 Carrier Board

We’ve already seen several computers-on-module/systems-on-module based on NXP i.MX8/8M processors, most of which use proprietary standards, but so far we’ve covered at least on Qseven 2.1 CoM with Advantech ROM-7720 powered by i.MX 8QuadMax SoC. SECO has now announced their SM-C12 module compliant with another SoM standard: SMARC 2.0. The system-on-module is powered by i.MX 8M dual or quad core processor, supports up to 4GB RAM, offers optional WiFi and Bluetooth connectivity, and plenty of I/Os thanks to the 314-pin MXM3 connector mandated by SMARC 2.0 specification. The module targets home automation, transportation, digital signage and vending machines, multimedia devices, and others applications requiring real-time processing and/or multimedia capabilities. SC-12 module specifications: SoC – NXP i.MX 8M dual or quad Arm Cortex-A53 processor with Cortex-M4 real-time core, Vivante GC7000Lite GPU with support for OpenGL ES 3.1, Open CL 1.2. OpenGL 3.0, Vulkan, DirectX System Memory – LPDDR4-3200 memory, 32-bit interface, […]