Hardware Category - Page 816 of 1070 - CNX Software

November 4, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Manifold mini PC Powered by Nvidia Tegra K1 Processor is Designed for Drones

DJI is known for their high-end drones such as Phantom 3 quadcopter, but the company has now launched Manifold mini PC powered by Nvidia Tegra K1 quad core Cortex A15 processor and running Ubuntu 14.04 in order to allow developers run their own applications performing complex computing tasks and advanced image processing “on the fly”. DJI Manifold specifications: SoC – Nvidia Tegra K1 quad core Cortex-A15 processor @ up to 2.2 GHz with 192-core Kepler GPU System Memory – 2GB DDR3L Storage – 16GB eMMC 4.51 flash, micro SD slot Video Output – mini HDMI port Audio I/O – mini HDMI, combo audio jack for microphone and headphone Connectivity – Gigabit Ethernet port USB – 2x USB 3.0 ports, 2x USB 2.0 host ports, 1x micro USB port (supports Force Recovery mode and Host mode) , and a non-standard USB 2.0 interface with the drone. Camera – Camera In and […]

November 4, 2015November 5, 2015 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Teclast X16 Tablet Comes with an Intel Atom x7-Z8700 Processor and 8GB RAM, Dual Boots Android 5.1 and Windows 10

There’s been a few Cherry Trail devices launched recently, but the Intel Atom x5-Z8300 processor found in most new devices does not offer that much over the older Intel Atom Z3735F, and only an handful of devices have been released based on the more powerful Atom x7-Z8700 processor such as Microsoft Surface 3 tablet and Magicstick TV stick. I can also often read people complaining 2GB RAM is not enough, but Teclast X16 Power 11.6″ tablet addresses these two issues with an Atom x7-Z8700 quad core processor, 8GB RAM, and 64GB storage for dual booting Windows 10 and Android 5.1. Teclast X16 Power specifications: SoC – Intel Atom x7-Z8700 “Cherry Trail” quad core processor @ 1.6 GHz (Bust freq: 2.4 GHz) with Intel Gen8 HD graphics with 16EU @ 600MHz (2W SDP) System Memory – 8 GB LPDDR3-1600 Storage – 64 GB eMMC + micro SD slot up to 64GB […]

November 4, 2015November 6, 2015 by Jean-Luc Aufranc (CNXSoft) - 203 Comments

Giveaway Week – M-195 Android TV Box

The third TV box of this giveaway week is a one year old device based on Realtek RTD1195 dual core Cortex A7 processor with a Mali-400MP2. However, beside relatively weak CPU and GPU, M-195 Android TV box features some fast interfaces like USB 3.0, and Gigabit Ethernet, as well as 4K video decoding and output, HDMI audio pass-through up to 7.1 channels, an HDMI input port, and H.265 video codec support. While I found out the device was quite slow at times during the review, video playback quite good using XBMC with an external player, and USB 3.0 and Gigabit Ethernet interface provides a boost, albeit limited, compared to other devices with only USB 2.0 and Fast Ethernet. At the time of review, 7.1 audio pass-through did not work, nor SAMBA in XBMC (now Kodi), and HDMI input was not very useful, but M-195 has got several firmware updates, including […]

November 3, 2015December 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

T20 Android 4.4 and Windows 10 Keyboard Computer Sells for $112

PiPo introduced a Windows 10 keyboard PC powered by an Intel Bay Processor called PiPo K1 a few weeks ago, but AFAIK it’s not shipping yet. At least one company beat them to market, as T20 Android and Windows 10 keyboard computer powered by Intel Atom Z3735F processor is currently selling for $169.99 on Banggood. [Update: It’s now on FocalPrice for $119.99 shipped] T20 keyboard PC specifications: SoC – Intel Atom Bay Trail Z3735F quad core processor @ up to 1.83 GHz with Intel Gen7 HD graphics up to 667MHz System Memory – 2GB DDR3L Storage – 32GB eMMC + micro SD slot up to 64GB Keyboard – 76 keys QWERTY keyboard and (rather small) touchpad Video Output – 1x HDMI, 1x VGA Audio – Stereo speakers, 3.5mm audio jack Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi, Bluetooth 4.0 USB – 2x USB host ports Misc – Power button Power […]

November 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

How to Use Nextion Serial Touchscreen Displays – Part 1: Standalone Mode

Itead Studio launched an Indiegogo campaign earlier this year for their Nextion TFT displays that can be connected to external board such as Arduino or Raspberry Pi via the serial interface, or even a standard computer provided you have a USB to TTL debug board. The campaign was successful with over 1,700 backers, and the company recently sent me two samples for review: a 2.4″ display and a 5″ display. In this post, I’ll look at the boards, and make a small standalone demo with Nextion Editor in Windows. Nextion NX3224T024 2.4″ Display The first item is a 2.4″ TFT display called NX3224T024_011N (non-touch) or NX3224T024_011R (Resistive touch) with 65536 color, 320×240 pixel resolution, LED backlight and up to 200nit brightness. It ships with a cable for the serial connection (5V, Tx, Rx, and GND). The back of the display features the serial connector, a micro SD used to load the […]

November 3, 2015November 5, 2015 by Jean-Luc Aufranc (CNXSoft) - 232 Comments

Giveaway Week – ARNU Box Mach Q Pure Linux Media Player

The second device for this giveaway week is ARNU Box Mach Q TV box that runs Kodi 15.2 on an Amlogic S805 quad core processor with 1GB RAM and 8GB flash, the little brother of ARNU Box Mach 10 powered by the more powerful Amlogic S812 processor. Due to lack of time I did not review ARNU Box Mach Q, but I did review ARNU Box Mach 10, which is loaded with a similar firmware based on Linux based EmBER OS. Video playback was very good with Kodi 15.2 with automatic frame rate switching support, working audio pass-through via S/PDIF, but HDMI audio pass-through did not work with my AV receiver. Since it’s the same firmware base, I fully expect the same good video experience on ARNU Box Mach Q minus support for 4K videos. You can find more pictures on ARNU Box Mach Q unboxing and teardown post. To […]

November 2, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

$80 Doogee X5 Pro Android 5.1 LTE Smartphone Comes with 2GB RAM, 16GB Flash

I’ve been amazed how the price of technology has come down recently, with decent TV boxes selling for $30 to $50, and I’ve now been informed about Doogee X5 Pro, a quad core smartphone running Android 5.1, supporting LTE networks, and featuring with 2GB RAM, 16GB flash, and a 5″ HD screen selling for $80 shipped. Doogee X5 Pro specifications: SoC – Mediatek MT6735 quad core Cortex A53 processor @ 1.0 / 1.3 GHz with Mali-720 GPU System Memory – 2GB RAM Storage – 16GB flash (12GB available to user) + micro SD slot up to 32GB Display – 5.0″ IPS HD Screen (1280×720) Connectivity – 802.11 b/g/n WiFi, Bluetooth 4.0, GPS/AGPS Cellular Connectivity 2x Micro SIM slots; Dual SIM dual standby 2G – GSM 850/900/1800/1900MHz 3G – WCDMA 900/2100MHz 4G – FDD-LTE 800/900/1800/2100/2600MHz Camera – 5.0MP rear camera (up to 8.0MP by interpolation); 2.0MP font-facing camera (up to 5.0MP […]

November 2, 2015November 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Graperain G6818 IBOX Board is Powered by Samsung S5P6818 Octa-core Cortex A53 Processor

Shortly after writing about NanoPi2 development board based on Samsung S5P4418 processor, I checked some other more featured solutions based on the same processor, but made by competitors such as Graperain G4418 IBOX Card Computer or ARMBest Core4418 module. Whiel browsing Shenzhen Graperain Technology website, I discovered another processor by Samsung with S5P6818 octa core Cortex A53 processor found in their G6818 IBOX single board computer. Board specifications: SoC – Samsung S5P6818 octa-core ARM Cortex A53 processor @ 1.4 to 1.6 GHz with Mali-400MP 3D GPU System Memory – 2GB DDR3 up to 800MHz (1GB optional) Storage – 8GB eMMC Flash (16GB optional) + 2x micro SD slot Video Output / Display I/F – micro HDMI and VGA connectors; LCD (RGB), MIPI DSI and LVDS interfaces; Audio – micro HDMI, headphone jack, speaker header; Connectivity – Gigabit Ethernet (RTL8211E), Wifi and Bluetooth 4.0 (Realtek RTL8723BU module) USB – 2x USB 2.0 […]