Linux Category - CNX Software - Embedded Systems News

April 27, 2024April 27, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Azulle Access Pro Intel N100 PC stick ships with Windows 11, Linux, or Zoom

Azulle Access Pro is a PC stick based on an Intel N100 quad-core Alder Lake” processor with up to 8GB RAM, 128GB eMMC flash, and a male HDMI port which is offered with Windows 11 Pro, Linux, or “Zoom” operating systems (more on that below). The mini PC also provides a microSD card slot, gigabit Ethernet, WiFi 6 and Bluetooth 5.2 with an external antenna, USB 3.0 Type-A and Type-C ports, and a 3.5mm audio jack. We’ve written about pocket-sized mini PCs based on Alder Lake-N processors before, for instance, the MeLe PCG02 Pro N100 or the slightly wider MeLe Quieter4C, but the Azulle model is different since it comes with a male HDMI connector which would allow users to connect it directly into a TV or monitor without a cable. Azulle Access Pro specifications: SoC – Intel Processor N100 quad-core Alder Lake-N processor @ up to 3.4 GHz (Turbo) […]

April 26, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Pivistation 5 – A Raspberry Pi 5 Camera Kit to quickly get started with computer vision (Crowdfunding)

Arducam Pivistation 5 is an all-in-one Raspberry Pi 5 camera kit that aims to provide a turnkey hardware and software solution to quickly get started with computer vision applications and offered with a choice of camera sensors designed for various applications. The system looks like a Raspberry Pi 5 SBC housed in the official case fitted with a camera. Three models are available, namely the “Hawkeye” featuring a high-resolution 64MP autofocus camera, the “Darksee” with an 8MP camera sensor with ultra low-light sensitivity, and the “Klarity” with a 20MP camera with fixed focus and a large 1-inch sensor. Pivistation 5 specifications All the cameras above rely on a rolling shutter, but the company is also working on the upcoming Arducam Pivistation 5 Swift model that includes a global shutter for robotics applications. Besides the pre-assembled hardware, the Arducam Pivistation 5 family aims to quicken the development process with pre-installed software […]

April 26, 2024 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Ubuntu 24.04 LTS “Noble Numbat” released with Linux 6.8, up to 12 years of support

Canonical has just released Ubuntu 24.04 LTS “Noble Numbat” distribution a little over two years after Ubuntu 22.04 LTS “Jammy Jellyfish” was released. The new version of the operating system comes with the recent Linux 6.8 kernel, GNOME 46, and a range of updates and new features we’ll discuss in this post. As a long-term support release, Ubuntu 24.04 LTS gets a 12-year commitment for security maintenance and support, with five years of free security maintenance on the main Ubuntu repository, and Ubuntu Pro extending that commitment to 10 years on both the main and universe repositories (also free for individuals and small companies with up to 5 devices). This can be extended a further 2-year, or 12 years in total, for Ubuntu Pro subscribers who purchase the Legacy Support add-on. Canonical explains the Linux 6.8 kernel brings improved syscall performance, nested KVM support on ppc64el, and access to the […]

April 26, 2024April 25, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Firefly AIBOX-1684X compact AI Box delivers 32 TOPS for large language models, image generation, video analytics, and more

Firefly AIBOX-1684X is a compact AI Box based on SOPHON BM1684X octa-core Arm Cortex-53 processor with a 32 TOPS AI accelerator suitable for large language models (LLM) such as Llama 2, Stable Diffusion image generation solution, and traditional CNN and RNN neural network architectures. Firefly had already released several designs based on the SOPHON BM1684X AI processor with the full-featured Firefly EC-A1684XJD4 FD Edge AI computer and the AIO-1684XQ motherboard, but the AIBOX-1684X AI Box offers the same level of performance, just without as many interfaces, in a compact enclosure measuring just 90.6 x 84.4 x 48.5 mm. AIBOX-1684X AI box specifications: SoC – SOPHGO SOPHON BM1684X CPU – Octa-core Arm Cortex-A53 processor @ up to 2.3 GHz TPU – Up to 32TOPS (INT8), 16 TFLOPS (FP16/BF16), 2 TFLOPS (FP32) VPU Up to 32-channel H.265/H.264 1080p25 video decoding Up to 32-channel 1080p25 HD video processing (decoding + AI analysis) Up […]

April 25, 2024April 25, 2024 by Tomisin Olujinmi - No Comments

Ronetix launches NXP i.MX93 SoMs in SMARC and OSM-L form factors

Austrian embedded equipment manufacturer, Ronetix, has released two i.MX93 system-on-modules (SoMs): the RNX-iMX93-OSM that follows the Open Standard Module (OSM) form factor, and the RNX-iMX93-SMARC compliant with the SMARC 2.1 (smart mobility architecture) standard. Ronetix i.MX93 SoMs are powered by the NXP i.MX93 processor featuring a 64-bit dual-core Arm Cortex-A55 application processor running at 1.7GHz and a Cortex-M33 core running at 250MHz for low-latency and real-time tasks. The SoC supports up to 2GB LPDDR4 RAM and 512GB eMMC storage, and the integrated Arm Ethos-U65 microNPU offers up to 0.5 TOPS of computing power for machine vision applications and intelligent energy management (IEM). Applicable for industrial automation and IoT, the SoMs also feature two CAN and Ethernet interfaces to aid high-speed data transfer. Other hardware featuring the i.MX93 that we have covered recently include the ADLINK OSM-IMX93, MaaXBoard OSM93, and Ka-Ro Electronics’ QS93. The RNX-iMX93-SMARC system-on-module comes in 82 x 50mm […]

April 24, 2024April 24, 2024 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

ASRock SBC-262M-WT 3.5-inch motherboard features up to Intel Atom X7433RE Amston Lake processor

ASRock Industrial SBC-262M-WT is a 3.5-inch SBC motherboard powered by the latest Intel Atom x7433RE quad-core Amston Lake embedded processor with support for up to 48GB DDR5-4800 memory, triple 4K display outputs, two Ethernet ports, including one with 2.5Gbps Ethernet and Intel TSN/TCC. The motherboard also takes SATA 3.0 and M.2 Key M NVMe storage, offers multiple USB interfaces, supports WiFi and/or 4G LTE or 5G cellular connectivity via M.2 modules and SIM card socket, and provides industrial features such as a wide -40 to 85°C operating temperature range and a wide 9V to 36V DC voltage input range that make it suitable for smart retail, smart cities, and embedded industrial environments. ASRock Industrial SBC-262M-WT 3.5-inch motherboard specifications: SoC – Intel Amston Lake Processors up to Atom X7433RE quad-core processor clocked up to 3.4GHz with Intel UHD Graphics; 9W TDP System Memory – Up to 48GB single-channel DDR5 4800 MHz […]

April 24, 2024April 24, 2024 by Debashis Das - 1 Comment

BIGTREETECH Pi 2 SBC and CB2 module for 3D printers now feature Rockchip RK3566 SoC with Gigabit Ethernet

BIGTREETECH Pi 2 and the BIGTREETECH CB2 Compute Modules

BIGTREETECH recently announced the release of the BIGTREETECH Pi 2 SBC and BIGTREETECH CB2 SoM, both powered by the Rockchip RK3566 SoC. These new modules are direct upgrades from the BIGTREETECH Pi v1.2 and BIGTREETECH CB1, which we covered and reviewed in our previous posts. Specially designed for 3D printers, these new modules have a similar form factor to that of a Raspberry Pi and the RPI CM4 module, and come with a set of upgraded features including support for GbE Ethernet, dual-band WiFi, up to 32GB of LPDDR4 RAM, eMMC storage, HDMI, USB, and more. BIGTREETECH Pi 2 Specifications SoC – Rockchip RK3566 CPU – Quad-core Arm Cortex-A55 processor @ 1.8 GHz GPU – Arm Mali G52-2EE GPU with support for OpenGL ES 1.1/2.0/3.2, Vulkan 1.1, OpenCL 2.0 NPU – 0.8 TOPS AI accelerator VPU – 4Kp60 H.265/H.264/VP9 video decoding, 1080p100f H.265/H.264 video encoding System Memory – 2GB LPDDR4 (Customizable – 1GB/2GB/4GB/8GB) […]

April 23, 2024April 22, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

The Open Home Foundation will manage Home Assistant, ESPHome, Zigpy among over 240 open-source Smart Home projects

The Open Home Foundation is a non-profit organization that will manage over 240 Smart Home projects, standards, drivers, and libraries including Home Assistant, ESPHome, Zigpy, Piper, and Improv Wi-Fi with the goal of “fight[ing] for the fundamental principles of privacy, choice, and sustainability for smart homes”. The non-profit was introduced during the “State of the Open Home 2024” (see video embedded at the end of this article) with Nabu Casa – the for-profit company behind Home Assistant – transferring all their projects to the new entity, and the Open Home Foundation will also help with the development of critical external projects such as Z-Wave JS, WLED, Rhasspy, and Zigbee2MQTT. The foundation further explains the goal of teaming multiple projects together in a stronger structure: We’ve done this to create a bulwark against surveillance capitalism, the risk of buyout, and open-source projects becoming abandonware. To an extent, this protection extends even […]