Linux Category - Page 322 of 552 - CNX Software

October 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Review of Allo Vana Player Linux HiFi Audio System with Max2Play, SqueezeBox and Kodi

Last month I showcased what I called “Allo Sparky Audio Kit” with a DAC board (Piano), an amplifier board (Volt), and usually hard to find reclocker and capacitance multiplier boards (Kali & CM), all connected to Allo Sparky ARM Linux development board powered by Actions Semi S500 quad core Cortex A9 processor, and running Ubuntu 12.04. In the first post, I just described the boards, and showed how to assemble the kit, but now that I have received the user’s manual, it turns out the kit is actually called “Vana Player” and the provided Ubuntu firmware image runs Max2Play Browser based system that’s also available for Raspberry Pi and ODROID boards. Before starting the kit, you’ll need to connect speakers to Piano DAC board and/or Kali board, as well as a 19.5V power source such as a laptop power supply to connect to the CM board. I connected some USB […]

September 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

NXP i.MX 6ULL Cortex A7 Processor is the Latest Member of i.MX6 32-bit ARM Processor Family

Freescale first unveiled i.MX6 processor family at CES 2011. Since then NXP has acquired Freescale, and kept working on the processors and even recently unveiled NXP i.MX 6ULL Cortex A7 processor promising 30 percent more power efficiency than its nearest competitors, and designed for “cost-effective solutions for the growing IoT consumer and industrial, mass markets”. NXP i.MX 6ULL key features and specifications: CPU – ARM Cortex A7 core @ up to 528 MHz with 128KB L2 cache Memory I/F – 16-bit DDR3/DDR3L, LPDDR2 memory support Storage I/F – 8/16-bit parallel NOR flash / PSRAM, dual-channel Quad-SPI NOR flash, 8-bit raw NAND flash with 40-bit ECC, 2x MMC 4.5/SD 3.0/SDIO Port Display & Camera I/F Parallel LCD Display up to WXGA (1366×768) Electrophoretic display controller support direct-driver for E-Ink EPD panel, with up to 2048×1536 resolution at 106 Hz 8/10/16/24-bit Parallel Camera Sensor Interface Peripherals 2x USB 2.0 OTG, HS/FS, Device […]

September 29, 2016June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Nvidia Unveils Xavier Automotive & AI Octa-core SoC with 512-Core Volta GPU, 8K Video Decode & Encode

Nvidia has introduced the successor to their Parker SoC mostly targeting self-driving cars and artificial intelligence applications, with Xavier SoC featuring 8 custom ARMv8 cores, a 512-core Volta GPU, a VPU (Video Processing Unit) supporting 8K video decode and encode and HDR (High Dynamic Range), as well as a computer vision accelerator (CVA). The processor will deliver 20 TOPS (trillion operations per second) of performance, while consuming only 20 watts of power, and since it’s designed specifically for autonomous cars, it will comply with automotive safety standards such as ISO 26262 functional safety specification. Anandtech published a comparison table with Tegra X1 (Erista), Parker, and Xavier using currently available information. Xavier Parker Erista (Tegra X1) CPU 8x NVIDIA Custom ARM 2x NVIDIA Denver + 4x ARM Cortex-A57 4x ARM Cortex-A57 + 4x ARM Cortex-A53 GPU Volta, 512 CUDA Cores Pascal, 256 CUDA Cores Maxwell, 256 CUDA Cores Memory ? LPDDR4, […]

September 29, 2016September 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Mintbox Mini Pro Linux mini PC Gets AMD A10 Micro-6700T Processor, 8GB RAM, and 120 GB Storage for $395

Minitbox Mini is a low power mini PC based on Compulab Fitlet-i computer powered by AMD A4 Micro-6400T “Mullins” processor and running Linux Mint that was launched in 2015. There’s now an upgraded model – Mintbox Mini Pro – with a more powerful AMD A10 Micro-6700T, more RAM and storage with 8GB DDR3 and a 120 GB SSD, and faster and better networking thanks to 802.11ac WiFI, and dual Gigabit Ethernet. Mintbox Mini Pro specifications: SoC – AMD A10 Micro-6700T 64 bit quad-core processor up to 1.2 GHz / 2.2 GHz (Boost frequency) with Radeon R6 Graphics (4.5W TDP) System Memory – 8 GB DDR3L-1333 SDRAM (SODIMM module) Storage – 120GB mSATA (SATA 3.0) SSD, and micro-SD slot (SDXC support, rate 25 MB/s) Video Output – Dual HDMI 1.4a up to 1920×1200@60Hz; support two independent displays Audio I/O Output – HDMI, digital S/PDIF 7.1+2 channels output, 3.5 mm stereo audio jack […]

September 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Qualcomm is Finally Open for Business with Snapdragon 410E and 600E Processors for Embedded & IoT Applications

Qualcomm processors are found in mobile devices and wearables selling in large quantities, some boards and modules from embedded systems companies such as Inforce Computing and Intrinsyc, as well as it own 96Boards compliant DragonBoard 410c and DragonBoard 600c development boards, but it’s hard to find them in many other products, and few crowdfunding campaign feature Snapdragon processors, as Qualcomm may not be willing to work with smaller companies and startups. The company has made some progress in that regards with their partnership with Allwinner to allow smaller Chinese companies to manufacture Snapdragon based Tablets, and their newly introduced Snapdragon 410E and 600E processors targeting embedded systems and IoT applications, available from Arrow Electronics without questions asked, and with long term availability for 10 years, i.e. until 2025 based on available of Snapdragon 410 mobile version. Snapdragon 410E (APQ 8016E) specifications: CPU – Quad ARM Cortex A53 @ up to […]

September 28, 2016September 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 33 Comments

FriendlyARM Introduces NanoPi NEO AIR Board with WiFi & BLE, Camera Interface and 8GB Storage for $17.99

FriendlyARM launched NanoPi NEO board with Allwinner H3 processor, Ethernet, and USB ports for $7.99 to $9.99 in July, and the company is back with a new board with the same form factor and processor, by trading Ethernet for WiFi, dropping one USB 2.0 port for a DVP camera interface, and adding an 8GB eMMC flash. NanoPi NEO AIR specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 512 MB DDR3 Storage – 8GB eMMC Flash (Samsung) + micro SD card slot Connectivity – WiFi 802.11 b/g/n and Bluetooth 4.0 LE (via Ampak AP6212 module) with IPEX antenna connector USB – 1x micro USB OTG port, 2x USB via headers Camera – 1x DVP camera interface with optional 5MP CAM500B camera Expansion headers 24-pin header with I2C, 2x UART, SPI, PWM, and power signals 12-pin […]

September 27, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

BeagleBone Black Wireless Board Gets WiFi and Bluetooth 4.1 LE, Drops Ethernet

The BeagleBone Black is still one of the most popular development boards around, but in a world going more and more wireless, it only comes with a wired Ethernet interface. Seeed Studio BeagleBone Green Wireless and Neuromeka BeagleBone Air already provided BeagleBone compatible boards with WiFi and Bluetooth LE, as well as Zigbee for the latter, but now BeagleBoard.org themselves have launched BeagleBone Black Wireless with WiFi and Bluetooth 4.1 LE based on Octavo Systems OSD3358 System-in-Package with Texas Instrument Sitara AM3358 processor, 512 MB RAM, TI LDO and PMIC, and many passive components. BeagleBone Black Wireless specifications: SoC – Texas Instruments Sitara AM3358 Cortex A8 @ 1 GHz with PowerVR SGX530 GPU System Memory – 512 MB DDR3L Storage – 4GB eMMC flash + micro SD slot USB – 1x mini USB client port for power & communication, 1x USB host port Connectivity – 802.11 b/g/n WiFi + Bluetooth […]

September 27, 2016September 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Orange Pi Zero and Orange Pi i96 96Boards IoT Edition Boards Coming Soon

Shenzhen Xunlong Orange Pi boards are relatively popular thanks to their low price, and support on communities such as Armbian, but two new upcoming Orange Pi boards might make the company even more relevant in the development board space. First, the company is nearing completion of the tiny, and hopefully ultra cheap, Orange Pi Zero board with Allwinner H2+ processor, and Linaro has announced that an Orange Pi i96 boards compliant with 96Board IoT specifications is also coming soon. Orange Pi Zero The board has not been released, but some pictures have been uploaded to Armbian forums. Orange Pi Zero looks quite similar to NanoPi NEO board but with different processor, a slightly larger form factor, and both Ethernet and wireless connectivity. We don;t have other information for now, but it still possible to get most of Orange Pi Zero specifications from the photos: SoC – Allwinner H2(+) quad core […]