Linux Category - Page 358 of 553 - CNX Software

December 20, 2015December 20, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Texas Instruments Introduces Entry level Sitara AM3351 Cortex-A8 Processor

Texas Instruments Sitara AM335x processor are designed by industrial applications, and found in develompent board such as BeagleBone Black or BeagleBone Green, and the company has recently launched the new Sitara AM3351 Cortex A8 processor without 3D GPU, no PRU just like AM3352, but they’ve also canned the two CAN interfaces (sorry, I had to) in order to bring the cost lower, while keeping the processor software and pin-to-pin compatible with other AM335x processors available in 13×13 mm package. TI Sitara AM3351 CPU clock will also be limited to 300 MHz to 600 MHz with respectively AM3351BZCE30 and AM3351BZCE60 parts. It will only come with one Gigabit Ethernet port instead of up to two ports of other members of the family that are produced in 15x15mm package, and temperature range is limited to 0 to 90 C. Other features remain the same, and the processors will support TI-RTOS, Linux, Android, […]

December 19, 2015December 20, 2015 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

GeekBox TV Box Unboxing and Development Kit Assembly Guide

GeekBox is both an Android TV box based on Rockchip RK3368 octa-core processor, and a Linux development kit thanks to the CPU module inside the device, a baseboard and various accessories. The company has sent me a review sample, as well as the accessories currently available. So today, I’ll have a look at the box, and show how to connect everything together. GeekBox TV Box Unboxing I’ve received two carton boxes via DHL, one with GeekBox itself, and the other with some accessories. You could use GeeBox has a TV box, and forget about its development attributes, as the device comes with the usual accessories include a case, an HDMI cable, an infrared remote control, and a 5V/2A power supply. I was really surprised by how small it was compared to other 64-bit ARM TV boxes recently launched on the market, and looks very much like a small router with […]

December 18, 2015December 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

DietPi is Lightweight, Easy to Use Debian Based Distribution for Raspberry Pi, ODROID, and Orange Pi Boards

Raspberry Pi, Hardkernel ODROID, and Orange Pi are some of the most popular and cost effective development boards on the market today, and one British developer, going under Fourdee nickname, has released a lightweight distribution called DietPi working for all Rasbperry Pi boards, ODROID-C1(+), ODROID-XU3/XU4, and Orange Pi PC, with Orange Pi 2 and Orange Pi Plus support coming soon, as well as a VMWare virtual machine also available for evaluation. The compressed downloads are about 80 to 100MB depending on the target, the image that can be dump with dd or Win32DiskImager requires a 1GB or greater micro SD card as the image itself is about 500MB large, Internet access (Ethernet or Wifi), and optionally a USB Drive to allow installation on a USB drive for better performance, which of course does not apply if you have an eMMC module with your ODROID board. The image also contains some […]

December 16, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

$15 pcDuino3 Nano Lite Board Includes Gigabit Ethernet and a Real SATA Port

I often read people complain about the lack of SATA and Gigabit Ethernet on devices, and following up a discussion on a recent post about QNAP TAS-168 and TAS-268 NAS, I was made aware that pcDuino3 Nano board had a little brother without NAND Flash, nor an IR receiver that’s currently selling for $15 on Amazon US. pcDuino3 Nano Lite board specifications are exactly the same as the other version minus the stricken-through items: SoC – AllWinner A20 dual core ARM Cortex A7 @ 1.0 GHz with Mali 400MP2 GPU System Memory – 1GB DRAM Storage – 4GB NAND Flash, SATA connector and microSD card slot (up to 32GB) Video Output – HDMI 1.4 with HDCP support Audio Out – 3.5mm analog audio interface Connectivity – Gigabit Ethernet USB – 2x USB host, 1x USB OTG Expansion Headers – Arduino UNO extension interface with 14xGPIO, 2xPWM, 6xADC, 1xUART, 1xSPI, 1xI2C. […]

December 15, 2015December 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Aceberry S500 is a $60 Actions Semi S500 Development Board Comprised of a Module and a Baseboard

For some hard-to-explain reasons, Actions Semi S500 processor seems to be a popular choice for makers of boards, although I don’t think it has really been a success with hobbyists and makers so far. After ActDuino S500, LeMaker Guitar, Lemon Pi, Allo SPARKY, and Roseapple Pi boards, here comes another S500 quad core Cortex A9 development board with Aceberry S500 that’s quite inspired by LeMaker Guitar as seen by its baseboard and module design. Aceberry S500 board preliminary specifications: SoC – Actions Semi S500 quad core Cortex A9r4 processor @ 1.6GHz with PowerVR SGX544 GPU @ 500 MHz Memory – 1 GB DDR3 Storage – 8GB eMMC or NAND flash (16 and 32GB optional), SPI NOR flash Video Output – HDMI, and LCD connector Audio – HDMI, headset jack, digital output (RCA). Video Codec – H.265 (HEVC) and Ultra HD (4K*2K) video playback. Encoding up to 1080p@60fps. Connectivity – 10/100M […]

December 15, 2015December 15, 2015 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

How to Root Amlogic S905 based MINIX NEO U1 Box in Windows and Linux

MINIX NEO U1 is a great device, but if you have some apps that require root access, the firmware is not rooted by default. AndroidPC.es just posted instructions to root the device in Windows, and I’ve also adapted Daemonium’s batch script for Windows as a shell script in order root the device from Linux. Please note that this will break OTA firmware update, so you’ll have to upgrade firmware manually after rooting. The most steps are common between Linux and Windows Enable Developer options, by going to Settings->Advanced Settings->About Mediabox, and click 6 or 7 times in the Build number section, until the new menu is enabled. Go back once, and access Developer options to make sure USB debugging is enabled Now go to Settings->Network to check and note your IP address (WiFi or Ethernet) Download and extract AndroidPC.es_MINIX_NEO_U1_root_v01_Daemonium.zip They also asked to install WiFi adb in your system, but I […]

December 14, 2015December 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

QNAP TAS-168 and TAS-268 are NAS Running Android and Linux based QTS on Realtek RTD1195 Processor

QNAP has recently launched two network attached storage (NAS) devices with TAS-168 and TAS-268 that are based on Realtek RTD1195 dual core processor, and happen to run Android along side the company’s Linux based QTS operating system, and respectively have one and two bays for 2.5″ or 3.5″ hard drives. QNAP TAS-168 and TAS-268 specifications: SoC – Realtek RTD1195 dual core ARM Cortex A7 processor @ 1.1 GHz with Mali-400MP2 GPU System Memory – 2 GB DDR3 Storage 4 GB eMMC and SD card slot TAS-168 – 1x 2.5″ or 3.5″ SATA @ 3Gbs TAS-268 – 2x 2.5″ or 3.5″ SATA @ 3Gbs Video and Audio Output – HDMI port Connectivity – Gigabit Ethernet USB – 1x USB 3.0, 4x USB 2.0 host ports Misc – IR receiver, LEDs for HDD, LAN, status, and USB, buttons (Power, reset, USB copy) Power – TAS-168 – 12V/3A (36W) power adapter; TAS-268 – 12V/5A […]

December 11, 2015December 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Rikomagic MK36SLE (Linux Edition) Based on Intel Atom x5-Z8300 Processor Runs Ubuntu 15.04

When people think about Linux on Intel platform, they often believe it’s just as easy as flashing an Ubuntu ISO on a USB stick and install it on their computer. While that’s true for desktop or laptop processors, the low power Intel Atom processors for tablets such as Bay Trail-T or Cherry Trail are not well supported in Linux with various issues ranging from an incompatible UEFI binary to a complete lack of audio support. So far, most companies have not provided a decent version of Atom Z3735F or Atom x5-Z8x00 mini PCs with Linux, and all the work has been done by the community such as this Ubuntu 14.04 image for Atom Z3735F. But Rikomagic must have worked on a Cherry Trail Linux port, more exactly Ubuntu 15.04, for their MK36S Cherry Trail mini PC, and has now launched MK36SLE (Linux Edition). [Update: While most features are currently workings, […]