Category: Linux

Posted on by Jean-Luc Aufranc (CNXSoft) - 52 Comments on Orange Pi One is a $10 Quad Core Board with Ethernet and HDMI

Orange Pi One is a $10 Quad Core Board with Ethernet and HDMI

Until recently, Orange Pi PC was probably the most cost efficient ARM hardware, but with the launch of Raspberry Pi Zero, and to some extent C.H.I.P computer, they had some competitors in the ultra low cost space, so Shenzhen Xunlong Software developed two more cost effective Orange Pi boards, with Orange Pi One selling for $9.99 with Ethernet, and Orange Pi Lite for $12 with WiFi, also referred to as versions B and A. Orange Pi One & Lite (preliminary) Specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 512 MB DDR3 Storage – micro SD card slot Video & Audio Output – HDMI Connectivity Orange Pi One – 10/100M Ethernet Orange Pi Lite – WiFi USB Orange Pi One – 1x USB 2.0 host ports, 1x micro USB OTG port Orange Pi Lite – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on ODROID-C2 Amlogic S905 Development Board is in the Works

ODROID-C2 Amlogic S905 Development Board is in the Works

Hardkernel ODROID-C1 and later ODROID-C1+ boards, both based on Amlogic S805 SoC, have been a popular alternatives to Raspberry Pi 2 board this year. But now that Amlogic S905 quad core 64-bit ARM Cortex A53 processor has been available for a few months, people have been wondering whether the Korean company would launch an Amlogic S905 board, and it looks like ODROID-C2 might not be too far off based on firmware files on odroid.in website. The firmware includes a device tree file, which combined with other files give some clues about ODROID-C2 specifications: SoC – Amlogic S905 quad core Cortex A53 processor @ up to 2.0 GHz with penta-core (3+2) Mali-450MP GPU System Memory – 1GB RAM (in doc), 2GB RAM (in Device tree) Storage – 1x micro SD card Video Output – 1x HDMI out USB – 1x USB hub, 1x USB OTG I don’t have much more information […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on CubieTruck Plus Development Board with DisplayPort & HDMI Sells for $84 (in China)

CubieTruck Plus Development Board with DisplayPort & HDMI Sells for $84 (in China)

We first found out about CubieTruck Plus (aka Cubieboard 5) this summer, and while at the time we did not have the full details, it was clear from the board picture and name, that is was an update to CubieTruck board, replacing Allwinner A20 dual core processor by Allwinner A8 octa-core processor, and ditching the VGA port for DisplayPort while keeping most of the same features of the original version. The company has now provided more details while announcing the launch of the board in China, and it turns out CubieTruck Plus has a few more advantages, and at least one drawback. CubieTruck CubieTruck Plus SoC Allwinner A20 Allwinner H8 CPU Dual core Cortex A7 up to 1.08 GHz Octa core Cortex A7 up to 2.0 GHz GPU Mali-400MP2 PowerVR SGX544 up to 700 MHz Memory 2GB DDR3 Power 5V@2.5V power jack Ethernet Gigabit Ethernet (RJ45) WiFi 802.11 b/g/n (2.4 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on Dune HD Solo 4K is a High-End Media Player with a SATA Bay, a DVB-T2 Tuner, and Sigma Designs SMP8758 Processor

Dune HD Solo 4K is a High-End Media Player with a SATA Bay, a DVB-T2 Tuner, and Sigma Designs SMP8758 Processor

Dune HD, a company specializing in “high-performance digital media players”, has just unveiled Dune HD Solo 4K media player based on  Sigma Designs SMP8758 dual core Cortex A9 processor, supporting 10-bit HEVC video decoding up to 2160p @ 30 fps, HD audio pass-though, and including a SATA tray. Dune HD Solo 4K specifications: SoC – Sigma Designs SMP8758 dual core Cortex A9 processor @ 1.2 GHz with an ARM Mali-400 GPU and VXP image processing engine System Memory – 1GB Storage – 4GB flash for firmware, internal HDD rack with hot swap function for a 2.5″ SATA drive, SD card reader (TBC) Video Output – HDMI 1.4b up to 1080p60 and 4K @ 30 Hz (including 23.976, 25, 29.97, 50, 59.94Hz refresh rates), and composite video Audio Output – HDMI, analog stereo audio, coaxial S/PDIF (shared via AV port). 24-bit /192 KHz audio support Video codecs – MPEG2, MPEG4, XVID, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 16 Comments on Maxsun MS-GTX960 Nvidia GTX960 Graphics Card Unboxing and Installation

Maxsun MS-GTX960 Nvidia GTX960 Graphics Card Unboxing and Installation

When I wrote an article about H.265 and VP9 video encoding, I noticed only the second generation Maxwell Nvidia Graphics would support H.265 decoding (up to 500 fps) and HDMI 2.0 output, a few weeks after purchasing a first generation Nvidia GTX750 GPU… So when GearBest contacted me about Graphics cards reviews I said I would be interesting in HDMI 2.0 and H.265 capable graphics card, which I meant I had to get a card with Nvidia GM20x chip with the cheapest being GTX960. So the company agreed to send me Maxsun MS-GTX960 graphics card matching my requirements for $240.04. I won’t use it for gaming at all, but instead I plan to use the card to evaluate Kodi 16.x 4K H.265 and VP9 support and compare video performance to the cheap and low power Amlogic S905 TV boxes on the market, as well as try out H.265 video encoding, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on How to Upgrade Rockchip Firmware in Linux for RK3288, RK3328, RK3368, RK3399, etc..

How to Upgrade Rockchip Firmware in Linux for RK3288, RK3328, RK3368, RK3399, etc..

I’ve been looking for ways to upgrade firmware on Rockchip RK3368 based GeekBox in a computer running Ubuntu 14.04, but while they’ve provided firmware update instructions for Windows, which remains basically the same as upgrading firmware on Rockchip RK3288, there’s no such information for Linux. However, I could remember than Radxa Rock supported upgrade_tool utility, but since the tool linked on Radxa website might be outdated, I instead searched for some RKtools repository on Geekboxzone Github account, and I was lucky enough to find one. Here’s what I did to flash Light Biz OS to GeekBox with my Linux computer: Get the tools, and make sure upgrade_tool is there.

Download and extract the firmware, e.g. Cross_Lollipop_BizOS_V151208.7z:

Now connect a USB cable to the USB OTG port of your device or board. In case of GeekBox that’s the micro USB port. Now as the board is powered on, keep […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Texas Instruments Introduces Entry level Sitara AM3351 Cortex-A8 Processor

Texas Instruments Introduces Entry level Sitara AM3351 Cortex-A8 Processor

Texas Instruments Sitara AM335x processor are designed by industrial applications, and found in develompent board such as BeagleBone Black or BeagleBone Green, and the company has recently launched the new Sitara AM3351 Cortex A8 processor without 3D GPU, no PRU just like AM3352, but they’ve also canned the two CAN interfaces (sorry, I had to) in order to bring the cost lower, while keeping the processor software and pin-to-pin compatible with other AM335x processors available in 13×13 mm package. TI Sitara AM3351 CPU clock will also be limited to 300 MHz to 600 MHz with respectively AM3351BZCE30 and AM3351BZCE60 parts. It will only come with one Gigabit Ethernet port instead of up to two ports of other members of the family that are produced in 15x15mm package, and temperature range is limited to 0 to 90 C. Other features remain the same, and the processors will support TI-RTOS, Linux, Android, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 29 Comments on GeekBox TV Box Unboxing and Development Kit Assembly Guide

GeekBox TV Box Unboxing and Development Kit Assembly Guide

GeekBox is both an Android TV box based on Rockchip RK3368 octa-core processor, and a Linux development kit thanks to the CPU module inside the device, a baseboard and various accessories. The company has sent me a review sample, as well as the accessories currently available. So today, I’ll have a look at the box, and show how to connect everything together. GeekBox TV Box Unboxing I’ve received two carton boxes via DHL, one with GeekBox itself, and the other with some accessories. You could use GeeBox has a TV box, and forget about its development attributes, as the device comes with the usual accessories include a case, an HDMI cable, an infrared remote control, and a 5V/2A power supply. I was really surprised by how small it was compared to other 64-bit ARM TV boxes recently launched on the market, and looks very much like a small router with […]

Exit mobile version