Linux Category - Page 401 of 555 - CNX Software

January 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Linux based Vu+ DVB Set-top Boxes Now Support XBMC/Kodi

Vu+ Duo2, Solo2 and Solo SE are high-end Linux based DVB receivers powered by Broadcom processors made by Ceru, and with a relatively active community of users and developers. All three models have recently received support for XBMC in their “Black Hole” firmware. Solo SE is the most recent model having been released in 2014, against Duo2 and Solo2 that have been selling since 2012 according to Wikipedia. Since I’ve never heard about these, I’ll check out Duo2, as it comes with the most features out of the three. Vu+ Duo2 specifications: SoC – Broadcom BCM7424 dual core MIPS processor @ 1.3 GHz with VideoCore IV GPU System Memory – 2GB RAM Storage – 1 GB NAND flash + SATA III interface for 2.5″ and 3.5″ HDD (internal) + eSATA + Video Output – HDMI, SCART, Composite, and Component (YPbPr) Audio Output – HDMI, stereo audio, and optical S/PDIF Tuners – […]

January 14, 2015January 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

AMD Mullins Powered Compulab Fitlet mini PCs Run Linux Mint or Windows

Finally an alternative to the recent wave of Intel Bay Trail-T mini PCs and sticks thanks to Compulab Fitlet mini PCs powered by AMD Mullins APUs, namely AMD A4 Micro-6400T and E1 Micro-6200T, with Radeon graphics, supporting up to 8GB RAM, mSATA, up to two HDMI port, up to four Gigabit Ethernet ports, and more. There are three Fitlet models: Fitlet-i, Fitlet-X with four Gigabit Ethernet port, and Fitlet-B, the entry-level option. In Q2 2015, a MintBox mini model running Linux Mint will also be released. Fitlet-i specifications: SoC – AMD A4 Micro-6400T 64 bit quad-core processor up to 1.6 GHz with Radeon R3 Graphics (4.5W TDP) System Memory – Up to 8 GB DDR3-1333 (1x SODIMM) Storage – mSATA up to 1 TB (SATA 3.0), power eSATA (5V), and micro-SD slot (SDXC support, rate 25 MB/s) Video Output – Dual HDMI 1.4a up to 1920×1200@60Hz Audio I/O – HDMI, S/PDIF […]

January 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Broadcom Unveils BCM725x SoCs for STBs and TV Sticks

Broadcom has recently announced two new SoCs, namely BCM7250 and BCM72502, respectively targeted at OTT streaming media player form factor and HDMI stick or dongle applications. Both feature Broadcom’s Brahma-B15 ARMv7-A cores, support 10-bit H.265, HDMI 2.0, MHL 2.0, and up to to 4×4 5G WiFi via BCM4366 WiSoC. Key features listed by Broadcom for both SoCs: High Efficiency Video Coding (HEVC)/H.265 compression 6000 DMIPS B15 ARMv7-A CPU 1.0 Gpix/s OpenGL ES 3.0 3D GPU Supports HDMI 2.0 with HDCP 2.2 or MHL 2.0 digital video output PCIe connectivity to Broadcom BCM4366 4×4 carrier-grade 5G WiFi 480/576p30 transcode 1080p60 10-Bit HD HEVC decode and 4Kp60 upscale High Performance DDR3/DDR4 system memory interface Supports Android, Chromium, DIAL, DLNA CVP2, Miracast protocols Supports Broadcom Trellis Multi-Application Framework and DTVKit software stack The company can also provide reference platforms with 2×2 and 4×4 5G WiFi connectivity options via a high-speed PCIe interface, and announced […]

January 14, 2015May 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Downloading Files on Baidu, or via HTTP, Bittorrent or Metalink in Linux with BaiduExporter, Aria2 and YAAW

Most firmware files distributed by the manufacturers are uploaded to Baidu, but I’ve found the service not to be always reliable, especially for larger files. In Windows, people are recommended to use Baidu software (BaiduYunGuanjia), but there’s not such tool in Linux, so instead I investigate for command lines tools to download files from Baidu, and this lead me to two interesting tools called Aria2, a “lightweight multi-protocol & multi-source command-line download utility. It supports HTTP/HTTPS, FTP, BitTorrent and Metalink”, and YAAW “Yet Another Aria2 Web Frontend” with allow to start and monitor download locally or remotely. But let’s start with the first tool I found: pan-baidu-download, a Python script to download files from Baidu. To install it:

git clone https://github.com/banbanchs/pan-baidu-download.git
cd pan-baidu-download

1 2	git clone https://github.com/banbanchs/pan-baidu-download.git cd pan-baidu-download

We also need to install some dependencies (assuming python 2.7.x is already installed):

sudo apt-get install python-pip aria2

1	sudo apt-get install python-pip aria2

and then you can start downloading files as follows:

python bddown_cli.py download http://pan.baidu.com/s/somerandomcharacters

1	python bddown_cli.py download http://pan.baidu.com/s/somerandomcharacters

But after posting a bug about password-protected […]

January 12, 2015January 12, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

GrovePi+ Starter Kit Adds Multiple Sensors, Relays, an LCD, a Buzzer… to the Raspberry Pi Boards

Seeed Studio and Dexter Industries has introduced the GrovePi+ Starter Kit for the Raspberry Pi (All models) that includes the GrovePi+ board, and various Grove modules adding sensors, buttons, a buzzer, LEDs and more. GrovePi+ board connects to the GPIO header of the Raspberry Pi, and features several Grove connectors to interface with Groves modules part of the starter kit Grove Light Sensor Module Grove Sound Sensor Module Grove Temperature and Humidity Sensor Module (not the ‘PRO’ version) Grove Button Module Grove Rotary Angle Sensor Module Grove Buzzer Module Grove Relay Module 3x Grove LED Modules (One Red, Green, and Blue LEDS, all replaceable with user LED) Grove Ultrasonic Sensor Module Grove LCD RGB Backlight Module Grove cables, and a GrovePi+ guidebook are also included. The GrovePi+ board is an Arduino compatible board featuring ATMEGA328 microcontroller, and can be programmed with C/C++, Python, and experimental Go and node.js coding is […]

January 10, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

$60 MarsBoard Rockchip PX2 Development Board Runs Ubuntu, Debian, openSUSE, or Android 4.4

Haoyu Electronics has made a new board similar to their MarsBoard RK3066, but instead of using a CPU module with Rockchip RK3066, they’ve used the industrial version of the chip called Rockchip PX2 dual core Cortex A9 processor. The board is also comprised of a baseboard and CPU module (CM-PX2), and based on the name of the pictures it’s using the exact same PCB: CM-RK3066 SoM, and SOM-RK3066 baseboard, but they simply replaced RK3066 by PX2, and increased the NAND flash capacity to 8GB. CM-PX2 Computer-on-Module: SoC – Rockchip PX2 dual core ARM Cortex A9 @ 1.4 GHz + Mali-400MP4 GPU System Memory – 1GB DDR3 Storage – 8 GB NAND Power Management Unit – TPS659102 Misc – TX indicator LED use for debug, Power Indicator LED 10/100M Ethernet PHY – LAN8720A Connectors – 2x 100- pin for baseboard connection, 40-pin connector (unsoldered) Dimensions – 70 x 58 mm SOM-RK3066 […]

January 9, 2015January 9, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

WeTek Play Set-Top Box Now Also Comes with an ATSC Tuner

WeTek Play is an Android media player that comes with a digital TV tuner, and in my recent updated review with a DVB-S2 tuner I found out that the software for live TV either via Internet or satellite was pretty good, and despite the older Amlogic AML8726-MX processor used in the box, it could still be recommended for watching live TV, with featuring like PVR, TimeShifting and EPG working reasonably well. At launch however, WeTek Play was only available with DVB-S2 or DVB-C/T/T2 tuners, so North American did not have the option to watch free-to-air digital TV on the box. This has now been resolved, as the company has launched Wetek Play with an ATSC tuner. The rest of the specifications for the ATSC model are exactly the same: SoC – Amlogic AML8726-MX dual core Cortex A9 @ 1.5GHz with a dual core Mali-400MP GPU System Memory – 1GB DDR3 […]

January 9, 2015January 9, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Patchsets for Nvidia Tegra K1 “Denver” Submitted to Linux Mainline

Some patchsets have been submitted for Nvidia Tegra 132 a few days ago to the Linux ARM Kernel mailing list. Tegra 132 is the codename for the 64-bit version of Tegra K1, and they’re also a mention of Norrin64 FFD board, that should be a Chromebook reference design.

diff --git a/include/soc/tegra/fuse.h b/include/soc/tegra/fuse.h
index 8e1249474e84..b5f7b5f8d008 100644
--- a/include/soc/tegra/fuse.h
+++ b/include/soc/tegra/fuse.h
@@ -21,6 +21,7 @@
 #define TEGRA30		0x30
 #define TEGRA114	0x35
 #define TEGRA124	0x40
+#define TEGRA132	0x13
 
 #define TEGRA_FUSE_SKU_CALIB_0	0xf0
 #define TEGRA30_FUSE_SATA_CALIB	0x124

diff --git a/include/soc/tegra/fuse.h b/include/soc/tegra/fuse.h

index 8e1249474e84..b5f7b5f8d008 100644

--- a/include/soc/tegra/fuse.h

+++ b/include/soc/tegra/fuse.h

@@ -21,6 +21,7 @@

#define TEGRA30 0x30

#define TEGRA114 0x35

#define TEGRA124 0x40

+#define TEGRA132 0x13

#define TEGRA_FUSE_SKU_CALIB_0 0xf0

#define TEGRA30_FUSE_SATA_CALIB 0x124

Tegra114 and Tegra124 are the codename for Tegra K1 32-bit processor with Tegra124 clocked at a higher frequency. Norrin64 board dts does not seem included in the patchsets, but it’s available from Chromium OS code, and shows it’s using 2GB RAM too. That also means Chrombooks like Acer Chromebook 13 (CB5) or HP Chromebook 14 with the 32-bit version of the Tegra K1 might soon get an upgrade to the 64-bit version. Thanks to David for the tip. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting […]