Category: OpenWrt

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on LicheePi 4A RISC-V SBC gets 16GB/128GB version, metal enclosure, 10.1-inch display, and more accessories

LicheePi 4A RISC-V SBC gets 16GB/128GB version, metal enclosure, 10.1-inch display, and more accessories

LicheePi 4A metal enclosure

LicheePi 4A quad-core RISC-V SBC is now available with 16GB RAM and 128GB eMMC flash, and Sipeed has also introduced various accessories such as a metal enclosure, a 10.1-inch touchscreen display, a PoE module, and a camera module. The Lichee Pi 4A board was first unveiled in December 2022, before the beta version launched in May 2023 with 8GB RAM and 8GB flash. Since then Sipeed also started selling an 8GB/32GB model, and now a new version of the T-Head TH1520-powered single board computer is now available with 16GB LPDDR4X and 128GB eMMC flash for $179 plus shipping. LicheePi 4A SBC While pricing is quite different, the LicheePi 4A was launched as a RISC-V alternative to the Raspberry Pi 4 SBC, so here are the specifications of the two boards side-by-side. Sipeed currently provides a Debian image based on Linux 5.10 and built with Yocto, but Linux mainline support is […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on MangoPi MPi-GW1 RISC-V router will support dual GbE, dual USB 2.0, CAN bus, RS485, and more

MangoPi MPi-GW1 RISC-V router will support dual GbE, dual USB 2.0, CAN bus, RS485, and more

RISC-V router

MangoPi is working on the first RISC-V router I’ve seen. The MPi-GW1 is based on the ArtInChip D213ECV 64-bit RISC-V processor with 128 MB DDR3 on-chip, 256MB SPI NAND flash, two Gigabit Ethernet ports, two USB 2.0 ports, MIPI DSI+touch connector,  support for CAN Bus and RS485, and expansion through a 22-pin GPIO header. Routers used to be mostly based on MIPS processors, then Arm processors took over, and maybe RISC-V is next, as MangoPi has just unveiled photos of the first RISC-V router on Twitter, and leaked some tidbits of information over the last two weeks or so on the social media platform. MangoPi MPi-GW1 RISC-V router specifications (preliminary): SoC – ArtInChip D213ECV 64-bit RISC-V (RV64IMAFDC) processor System Memory – 128MB 16-bit DDR3 @ 672 MHz (SiP) Storage – 256MB (2Gbit) SPI NAND flash (Winbond 25N02KVZEIR), microSD card slot (bottom side of the board) Networking – 2x Gigabit Ethernet […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on $26 WiFi 6 router board features Triductor TR6560 & TR5220 chips

$26 WiFi 6 router board features Triductor TR6560 & TR5220 chips

Banana Pi BPI WiFi 6 board

Banana Pi BPI-Wifi 6 is an ultra-low-cost WiFi 6 router board with five Gigabit Ethernet ports based on Triductor Technology TR6560 dual-core Cortex-A9 router SoC and TR5220 WiFi 6 chipset and that sells for just $26.32 plus shipping on Aliexpress, or $39.99 as part of a kit with the board, four antennas, and a 12V power supply. The board is equipped with 512MB RAM and a 128MB SPI flash for OpenWrt, comes with four antenna connectors for WiFi, and can also take an optional 12V PoE module for power instead of relying on a 12V power adapter via a DC jack. Banana Pi BPI-WiFi 6 board specifications: SoC – Triductor TR6560 dual-core Arm Cortex-A9 processor @ 1.2 GHz with LSW (Line-Card Switching) and hardware NAT up to 5 Gbps WiFi chipset – Triductor TR5220 WiFi 6 chipset System Memory – 512 MB DDR3 Storage – 128MB SPI NAND flash Networking […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Qualcomm IPQ9574 “AL02” router board support WiFi 7 modules, 10GbE networking

Qualcomm IPQ9574 “AL02” router board support WiFi 7 modules, 10GbE networking

Wallys DR9574 WiFi 7 board

The recent Linux 6.4 release included initial support for the AL02 WiFi 7 router board powered by a Qualcomm IPQ9574 quad-core Cortex-A73 processor part of the Qualcomm Networking Pro 1620 platform with the board featuring 2GB DDR4 RAM and 256MB NAND flash. A couple of weeks ago, I was contacted by Wallystech about their DR9574 WiFi 7 board based on the IPQ9574 processor, but I ended up not writing about it due to the lack of information and low-quality photos. But it turns out it’s actually the Qualcomm AL02 reference board that’s also provided by Compex. Both companies are world-leading in the sense they offer low-quality and blurry pictures in a way that’s unmatched in the industry, but we do have some specifications, so let’s have a closer look. AL02 / DR9574 board specifications: SoC – Qualcomm IPQ9574 quad-core Arm Cortex-A73 processor @ 2.2GHz processor System Memory – 2GB DDR4 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Intel soft router offers up to eight 2.5GbE ports, Comet Lake or Whiskey Lake Core processor

Intel soft router offers up to eight 2.5GbE ports, Comet Lake or Whiskey Lake Core processor

Intel mini router eight 2.5GbE ports

Topton is offering a soft router powered by an Intel Whiskey Lake or Comet Lake processor up to the Core i7-10510U quad-core/octa-thread processor with either eight 2.5GbE RJ45 ports or four 2.5GbE RJ45 ports and two 10GbE SFP+ cages. We’ve previously written about the low-cost InuoMicro G4305L8-S2 fanless industrial PC box with eight 2.5GbE interfaces, but it is powered by an Intel Celeron 4305UE dual-core Whiskey Lake processor, and the Topton model should offer more performance with a choice of 8th or 10th generation Intel Core i3/i5/i7 Whiskey Lake or Comet Lake SoC. Specifications: SoC (one or the other) Intel Core i3-8145UE dual-core Whiskey Lake processor up to 3.90 GHz with Intel UHD Graphics 620; 15W TDP Intel Core i5-10210U  quad-core/eight-thread Comet Lake processor @ 1.6 GHz / 3.9 GHz (turbo all cores) / 4.2 GHz (turbo one core), 24EU Intel UHD graphics; 6MB Cache; 15W TDP Intel Core i7-10510U […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Station P2S Rockchip RK3568 mini PC adds support for 4G LTE cellular connectivity

Station P2S Rockchip RK3568 mini PC adds support for 4G LTE cellular connectivity

Rockchip RK3568 mini PC 4G LTE

Firefly’s Station P2S mini PC is a new variant of the Station P2 based on Rockchip RK3568 Cortex-A55 SoC that adds support for 4G LTE cellular data connectivity, but downgrades to WiFi 5 instead of WiFi 6, but only supports shorter M.2 2242 NVMe SSDs. The Station P2S still comes with up to 8GB RAM, 128GB eMMC flash, and supports dual Gigabit Ethernet, HDMI 2.0 4Kp60 video output, 2.5-inch SATA 3.0 storage, and integrates a few USB 3.0/2.0 ports, plus an RJ45 jack for RS232 and RS485 serial interfaces. Station P2S specifications: SoC – Rockchip RK3568 quad-core Cortex-A55 processor @ up to 2.0 GHz with Arm Mali-G52 2EE GPU with support for OpenGL ES 1.1/2.0/3.2, OpenCL 2.0, Vulkan 1.1, 1.0 TOPS NPU for AI acceleration, 4Kp60 H.265/H.264/VP9 video decoding, and 1080p60 H.265/H.264 video encoding System Memory – 2GB, 4GB, or 8GB LPDDR4 Storage 32GB, 64GB, or 128GB eMMC flash 1x […]

Posted on by Leo Zachary - 3 Comments on MangoPi mCore-R818 module powers CyberPad 3.1-inch handheld android “tablet”

MangoPi mCore-R818 module powers CyberPad 3.1-inch handheld android “tablet”

CyberPad Components

mCore-R818 is the first time that MangoPi adopts the design combination of a core-lite module and a carrier board. As its name suggests, it is an AllWinner R818 SoM whose SoC integrates an Imagination PowerVR GE8300 GPU for UI rendering, can drive MIPI DSI, LVDS, and RGB displays, as well as cameras through a MIPI CSI interface, 8MP/5MP/2MP interfaces. The Allwinner R818 system-on-module powers a feature-rich carrier board as well as an upcoming Cyberpad Android “tablet” with a 3.1-inch display. MangoPi mCore-R818 The package design of the processor itself is small, so the MCore-R818 core board is only 3x3cm in size, but still contains four components with the Allwinner R818, the eMMC flash, LPDDR4 memory, and the AXP717 PMU. MangoPi provides two hardware configurations: 2GB DDR with 16GB eMMC flash, and 4GB DDR with 32GB eMMC flash. MCore-R818 Core Lite Specifications: SoC – Allwinner R818 CPU – Quad-core Arm Cortex-A53 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on GL.iNet Spitz AX review – Part 2: a router with 5G NR, WiFi 6, 2.5GbE, failover and load balancing

GL.iNet Spitz AX review – Part 2: a router with 5G NR, WiFi 6, 2.5GbE, failover and load balancing

Gl.iNet Spitz AX review 5G failover testing

Earlier this month I introduced the GL.iNet Spitz AX (aka GL-X3000NR) router with 2.5GbE, WiFi 6, and 5G NR cellular connectivity listing the specifications, doing an unboxing, and going through the initial setup. I’ve now received a new SIM card for testing and installed it into the router to continue the review. 4G/5G cellular connectivity on Spitz AX router After powering the router, the SIM card was detected and showed a 5G connection, but quickly fell back to 4G as can be seen with the cyan icon in the screenshot below. Shortly after, I lost 4G data connectivity, and after a while, the modem was not detected at all. But after restarting the router, and clicking on the “Auto Setup” icon everything looked to be working fine and I was always on a 5G connection from “house 1”. You’ll notice an envelop icon on the top right corner of the […]