Operating Systems Category - Page 269 of 1034 - CNX Software

April 7, 2021April 7, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

GMSL2 camera kit supports 15-meter long cables, up to six cameras with NVIDIA Jetson Xavier AGX

6x gmsl2 cameras nvidia agx xavier devkit

We’ve recently seen it’s possible to use a long cable with the Raspberry Pi camera thanks to THine camera extension kit that works with 20-meter LAN cables using V-by-One HS technology. e-con Systems has now launched a similar solution for NVIDIA Jetson Xavier AGX, one of the most powerful Arm devkits available in 2021, with NileCAM21 Full HD GMSL2 HDR Camera that supports up to 15-meter long cable as well as LFM (LED Flickering Mitigation) technology. NileCAM21 camera features and specifications: Based on OnSemi AR0233 Full HD camera module with S-mount interchangeable lens holder Gigabit Multimedia Serial Link 2 (GMSL2) interface with FAKRA connector Shielded coaxial cable for transmission of power and data over long distances (up to 15m) High Dynamic Range (HDR) with LED Flickering Mitigation (LFM) Supported resolutions and max frame rates for uncompressed UYVY streaming VGA (640 x 480) up to 60 fps qHD (960 x 540) […]

April 7, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Google releases the source code for Lyra low bitrate speech codec

Google showcased Lyra audio codec for high-quality voice calls at a low 3 kbps bitrate last February. But at the time, it was only for our eyes to see, or rather our ears to listen to, as the company did not release any software, but only audio samples with excellent quality compared to Speex @ 3 kbps or Opus @ 6 kbps. Google has now released the Lyra source code, written in C++ for optimal speed, efficiency, and interoperability and relying on both the Bazel build framework and the GoogleTest framework. The beta release provides the tools and APIs needed for Lyra encoding and decoding, and is currently optimized for the 64-bit Arm Android platform, but can also be run in Linux x86 64-bit. There is also an example app – lyra_android_example – that integrates with the Android NDK and offers a minimal GUI with two buttons to either record […]

April 6, 2021April 7, 2021 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Xiaomi Mi AX9000 WiFi 6 Enhanced router supports up to 1000 clients

Xiaomi launched the Mi AX6000 WiFI 6 Enhanced router, not to be confused with WiFI 6E, at the beginning of the year. The router offers up to 4804Mbps link at 5 GHz, and up to 574Mbps with a 6+1 antenna configuration, as well as one 2.5GbE port, and several Gigabit Ethernet ports. But for people requiring even more bandwidth, Xiaomi Mi AX9000 WiFi 6 Enhanced router offers even more wireless throughput using three frequency bands with four antennas each, and up to 1148 Mbps at 2.4 GHz, up to 4804Mbps at 5.2GHz, and up to 2402Mbps at 5.8GHz, which the company refers to as the 5G_Game band. Xiaomi Mi AX9000 WiFI 6 Enhanced Edition router specifications: SoC – Qualcomm IPQ8072 quad-core Cortex-A53 processor @ 2.2 GHz with dual-core 1.7GHz NPU (network acceleration engine / processing unit) System Memory – 1GB RAM Connectivity Wired 1x 2.5GbE LAN/WAN port 1x Gigabit Ethernet […]

April 6, 2021July 18, 2021 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

MECOOL KM2 – Netflix 4K certified, Amlogic S905X2-B TV Box runs Android TV 10

There are plenty of Amlogic TV boxes around, but unless you buy from the big players, most devices won’t support Netflix FullHD/4K because certification is hard to get for smaller companies. The Hailstorm device scaling program launched in 2018 aimed to make the process easier on Amlogic and Hisilicon processors, and HiMedia S1 TV dongle was one of the first to get approved. But now MECOOL KM2 joins the rank of Netflix 4K certified devices. The TV box is powered by an Amlogic S905X2-B processor running Android TV 10, also known as Android TV on Android 10. MECOOL KM2 specifications: SoC – Amlogic S905X2-B quad-core Cortex-A53 processor System Memory – 2GB DDR4 Storage – 8 GB eMMC flash, MicroSD card slot Video Output – HDMI 2.1 up to 4Kp60 with HDCP 2.3, HDMI-CEC support Codecs – H.264/AVC, H.265/HEVC, VP8 & VP9 HDR – HDR10+, HDR & HLG DRM – Widevine […]

April 4, 2021October 27, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Raspberry Pi CM4 based predictive maintenance gateway features Google Coral Edge AI accelerator

Techbase IModGate-AI predictive maintenance gateway

Techbase had already integrated the Raspberry Pi CM4 module into several industrial products including Modberry 500 CM4 DIN Rail industrial computer, ModBerry AI GATEWAY 9500-CM4 with a Google Edge TPU, and ClusBerry 9500-CM4 that combines several Raspberry Pi CM4 modules into a DIN Rail mountable system. The company has now announced another Raspberry Pi Compute Module 4 gateway – iModGATE-AI – specially designed for failure monitoring and predictive maintenance of IoT installations, which also embeds a Google Coral Edge TPU AI module to accelerate computer vision. iModGATE-AI gateway specifications: SoM – Raspberry Pi Compute Module 4 with up to 32GB eMMC AI accelerator – Google Coral Edge TPU AI module Video Output – HDMI port Connectivity – Gigabit Ethernet USB – USB 2.0 port Sensors – 9-axis motion tracking module with 3-axis gyroscope with Programmable FSR, 3-axis accelerometer with Programmable FSR, 3-axis compass (magnetometer) Expansion 2x 16-pin block terminal Advanced […]

April 3, 2021December 7, 2022 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Top 5 most powerful Arm SBC’s & Devkits in 2021

Most Powerful Arm SBCs development kit 2021

While companies like Hardkernel, Raspberry Pi, Orange Pi, and FriendlyArm offers affordable, great little Arm Linux development boards that are suitable for many projects, in some cases, your requirements may lead you to spend a bit more for either extra CPU power, more memory, AI processing power, faster I/Os and so on. That’s why I did a list of the most powerful Arm single board computers in late 2017, but with over three years passed since then an update is warranted. The boards from the list must be easily purchasable from individuals (with the cash to spare) or small companies, so we’ll exclude hard-to-source hardware, as well as Arm server boards like Ampere eMAG motherboard, that do not really qualify as single board computers. Snapdragon 888 Mobile Hardware Development Kit While there are plenty of Cortex-A72/A73 development boards around, it’s much hardware to find one with more recent Cortex-X1 or […]

April 2, 2021April 2, 2021 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

AMD Ryzen 5 4500U Mini PC offers triple 4K display support, 2.5GbE

AMD Ryzen 4000-U series 15W processors were announced in January 2020, and by the end of the year, we covered some mini PCs with Ryzen 3/5/7 processors from the new family with products such as ASRock Mars 4000U and ASROCK 4X4 BOX-4800U. MINISFORUM has now announced its own Ryzen 4000-U series mini PC with MINIXFORUM HM50 mini PC powered by an AMD Ryzen 5 4500U hexa-core processor that offers three 4K display output ports (HDMI, DP, and USB-C), as well a 2.5GbE and Gigabit Ethernet ports, six USB 3.0/3.1 ports and more. MINISFORUM DeskMini HM50 mini PC specifications: SoC – AMD Ryzen 5 4500U hexa-core/hexa-thread processor @ 2.3 GHz / 4.0 GHz (Turbo), with 6-core Radeon graphics @ 1.5 Hz, 11MB cache, 15W TDP (cTDP: 10-25W) System Memory – 2x DDR4 SODIMM sockets (fitted with 2x 8GB RAM modules, but upgradable up to 2x 32GB) Storage – 256GB or 512GB […]

April 2, 2021April 2, 2021 by Ian W MORRISON (Linuxium) - 13 Comments

Linux and Memory Performance on an Intel NUC 11 Enthusiast Phantom Canyon NUC11PHKi7C

I’ve already looked at Windows performance on the NUC11PHKi7C Enthusiast Phantom Canyon which is Intel’s latest NUC 11 flagship product specifically targeting gamers as it includes an NVIDIA RTX 2060 GPU. Now it is the turn of Linux and like before I will compare performance against Intel’s previous NUC with a discrete GPU: the NUC 9 Extreme Ghost Canyon. I will also briefly revisit Windows performance by looking at the impact of using 3200MHz memory as opposed to the 2400MHz used during the previous review. Hardware Overview As a reminder, the NUC11PHKi7C physically consists of a 221 x 142 x 42 mm (8.70 x 5.59 x 1.65 inches) rectangular plastic case. It is an actively cooled mini PC and uses Intel’s 10 nm Core i7-1165G7 Tiger Lake processor which is a quad-core 8-thread 2.80 GHz processor boosting to 4.70 GHz with Intel’s Iris Xe Graphics and the NUC also includes […]