NXP i.MX Category - Page 50 of 66 - CNX Software

June 11, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Linux 3.15 Released

Linus Torvalds announced the release of Linux Kernel 3.15 last Sunday: So I ended up doing an rc8 because I was a bit worried about some last-minute dcache fixes, but it turns out that nobody seemed to even notice those. We did have other issues during the week, though, so it was just as well. The futex fixes and cleanups may stand out, but as usual there’s various other random fixes since rc8 in there too: mainly drivers (drm, networking, sound, usb etc), networking, scheduling and perf tooling. But it’s all been fairly small and quiet, which *may* of course be due to the fact that last week was also the first week of the merge window for 3.16. That might have distracted some developers. I’m not entirely convinced I liked the overlap, but it seemed to work ok, and unless people scream really loudly (“Please don’t _ever_ do that again”) and give good […]

June 5, 2014June 5, 2014 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

EzeeCube is a Modular XBMC Media Hub with Up to 9TB Storage (Crowdfunding)

EzeeCube is a media hub that automatically synchronizes photos, videos and contacts from your iOS and Android phones or tablets. The hardware is based on Freescale i.MX6 Dual SoC, includes a 1 TB hard drive upgradable to 9TB with 4 extra drives, can be upgraded with hardware modules, and runs a custom version of XBMC on top of Linux built with the Yocto Project. EzeeCube specifications: SoC – Freescale i.MX6 Dual with two ARM Cortex A9 cores @ 1 GHz and Vivante 3D GPU System Memory – 1GB DDR3 @ 1066MHz Storage – 4GB eMMC, 1TB 2.5″ hard drive @ 5400rpm, and SD/SDXC card slot Connectivity – Gigabit Ethernet, 802.11n Wi-Fi (2.4GHz), and Bluetooth 3.0 Video Output – HDMI 1.4 with CEC support Audio Output – HDMI and optical S/PDIF Video Containers – AVI, MPEG, WMV, ASF, FLV, MKV/MKA, QuickTime, MP4, M4A, AAC, NUT, OGG, RealMedia RAM/RM/RV/RA/RMV8, OGM, 3gp, VIVO, […]

May 28, 2014May 28, 2014 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Technologic Systems TS-7670 Industrial Board Features Freescale i.MX286, Supports RAID-like System on SD Cards

Technologic Systems has unveiled an industrial board powered by Freescale i.MX286 ARM9 processor and a MCU part of NXP LPC1100 Cortex M0 series to to create a CDC ACM serial device on a host PC, and interfaces via UART, I2C, and SPI with the Freescale processor. The board targets applications such as fleet vehicle or asset tracking, point-of-sales (PoS), vending machines, data acquisition units, and data recorder modules. TS-7670 specifications: Processor – Freescale i.MX286 (1x ARM926EJ-S core @ up to 454MHz) MCU – NXP LPC Cortex M0 MCU in QFN32 package (LPC1114??) System Memory – 128MB to 256MB DDR2 RAM Storage – 2GB soldered NAND flash, 2x microSD slot with Doublestore support (similar RAID on SD card) Connectivity – 10/100 Ethernet port Wireless – Optional Telit Jupiter series multi-constellation GPS; optional CDMA, GPRS, or HSPA+ modules USB – USB host port, USB OTG port Other I/Os: 2x RS-232/interfaces (optional TTL […]

May 6, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ARM Based COM Express Modules by MEN Mikro Electronik and Pactron

A few days ago, in a post listing different system-on-module (SoM) standards, I mentioned COM Express standard was targeting SoMs based on x86 processors, and SMARC was the equivalent for ARM. I still understand it’s the case as COM Express standard defines mechanical dimensions that are usually larger than SoM standard for low power processors, some buses found in ARM and x86 are different (e.g. AFAIK LPC and PCI are not found in ARM SoC), and the standard supports high power signals which are not needed in ARM or MIPS processors. Having said that, I’ve been pointed out to two ARM based COM Express modules, which could make sense if you want to use an ARM based module using existing COM Express compatible baseboards. The COM Express modules below feature Freescale i.MX6 and Marvell Armada XP SoCs, and have been designed respectively by MEN Mikro Electronik and Pactron. MEN Mikro […]

April 22, 2014November 23, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Habey HIO Project ARM Board and HIO Wallpad PoE Automation Panel (Crowdfunding)

Habey has recently unveiled HIO Project, a $100 ARM Linux board designed for rapid prototyping powered by Freescale i.MX6 dual lite or quad, and shortly after, the company launched a Kickstarter project for HIO Wallpad, an in-wall Power-over-Ethernet touch controller for home or office automation embedding HIO Project boards. HIO Project Boards HIO Main Board (HIO-EMB-1200) specifications: Soc – Freescale i.MX6 Dual Lite or Quad ARM Cortex A9 processor @ 1 GHz + Vivante GPU System Memory – 1GB DDR3 Storage – 4G iNAND flash, 1x micro SD socket Video Output – 1x HDMI Audio – 1x on-board audio codec with 1W Amplifier built-in to I/O expansion headers Connectivity – 1x GbE PHY to I/O expansion headers Expansion Connectors: 1x PCIe PHY to I/O expansion headers 8x 50-pin 1.27mm pitch female header for I/Os: 24bit Parallel Display Port, dual channel 24bit LVDS, MIPI DSI up to 24bit, MIPI CSI up […]

April 21, 2014April 21, 2014 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

SolidRun HummingBoard is a Raspberry Pi Compatible Board Powered by Freescale i.MX6

Yesterday, I wrote about Banana Pi, an AllWinner A20 powered development board that’s mechanically and electrically compatible with the Raspberry Pi so that you can keep using your existing R-Pi accessories. It turns out another company is working on a similar concept. Solidrun who has brought us Cubox and Cubox-i in the past, will soon launch HummingBoard, a Raspberry Pi compatible board powered by Freescale i.MX6 solo/dual/quad SoC, bring even more power than the AllWinner A20 dual core Cortex A7 SoC found in the Banana Pi. The HummingBoard, previously known as Carrier One, is composed of a baseboard and SolidRun microSOM (micro System-on-Module) have comes with the followings specifications: SoC = Freescale i.MX6 Quad @ 1 GHz with Vivante GC2000 3D GPU. The microSoM also comes in solo and dual flavors, and although it’s likely the HummingBoard will be sold with these variants too, it’s not 100% confirmed System Memory […]

April 9, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

$249 Nitrogen6 MAX Development Board Features Freescale i.MX6 Quad, 4GB RAM, mPCIe Connector, and More

There are now many low cost development boards based on Freescale i.MX6 ARM Cortex A9 processors with Wandboard, Sabre Lite, UDOO, Nitrogen6X among others, all selling for less than $200. Boundary devices, the company behind Nitrogen6X board, has made a new version called Nitrogen6 MAX that maxes out the RAM to 4GB, adds a full mPCIE slot, a dual channel LVDS connector, and 4GB on-board eMMC. Nitrogen6 MAX specifications: SoC – Freescale i.MX 6Q quad core ARM Cortex A9 processor at 1GHz with Vivante GC2000 3D GPU System Memory – 4GB 64-bit DDR3 @ 532MHz Storage – 4GB eMMC, SATA connector, two micro SDHC card slots, 2MB Serial Flash Connectivity – 10/100/1G Ethernet, TiWi 802.11 b/g/n WiFi + Bluetooth BLE module Display Output – HDMI, 2x LVDS, Parallell RGB Audio I/O – HDMI, Analog (headphone/mic) audio and 2W amplified audio Camera I/F – Parallel camera port with OV5642 Interface, MIPI […]

April 4, 2014June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Novena Open Source Hardware ARM Laptop Gets Crowdfunded for $1995

In 2012, Andrew Huang (“Bunnie”) decided to build an open source hardware and software laptop codenamed Novena powered by Freescale i.MX6 as a side project. The goal of the project was to be fully open source, both in terms of hardware and software, and the components have been selected so that the datasheets can be downloaded without NDA. Design has now been completed, and a crowdfunding campaign has now been launched on Crowd Supply, but since finding low cost part was not priority, you’ll have to fork $1,995 to get the complete laptop, $1,195 will get you the desktop version, and $500 the motherboard only. There’s also a version of the laptop called “Heirloom Laptop” with a hand-crafted wood and aluminum case that goes for $5,000. Let’s go through the board specs first: SoC – Freescale iMX6 Quad-core Cortex A9 CPU with NEON FPU @ 1.2 GHz. – NDA-free datasheet […]