STMicro STM32 Category - Page 18 of 37 - CNX Software

July 29, 2020July 29, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

HydraNFC Shield v2 Delivers Up to 1600 mW with STMicro ST25R3916 NFC Chipset

When Benjamin Vernoux is not working on open-source firmware & tools for AirSpy R0/R2/mini SDR, he spends his time on other projects such as HydraBus STM32 board with NFC support which we covered back in 2014. The HydraNFC Shield that came with the board was based on Texas Instruments TRF7970A NFC chipset with limited features and not compliant with any RF/NFC standard. Benjamin has now launched HydraNFC Shield v2 powered by STMicro ST25R3916 NFC chipset and equipped with a differential antenna. The new version of the shield still works with the original HydraBus board and allows much more output power (1,600mW vs 200 mW) and supports a wider range of NFC features & standards. HydraNFC Shield v2 features and specifications: NFC Chipset – STMicro ST25R3916 high-performance NFC universal device supporting NFC initiator, NFC target, NFC reader and NFC card emulation modes Antenna – Differential antenna with power up to 1600mW […]

July 27, 2020December 2, 2022 by Jean-Luc Aufranc (CNXSoft) - No Comments

Edge Impulse Enables Machine Learning on Cortex-M Embedded Devices

Artificial intelligence used to happen almost exclusively in the cloud, but this introduces delays (latency) for the users and higher costs for the provider, so it’s now very common to have on-device AI on mobile phones or other systems powered by application processors. But recently there’s been a push to bring machine learning capabilities to even lower-end embedded systems powered by microcontrollers, as we’ve seen with GAP8 RISC-V IoT processor or Arm Cortex-M55 core and the Ethos-U55 micro NPU for Cortex-M microcontrollers, as well as Tensorflow Lite. Edge Impulse is another solution that aims to ease deployment of machine learning applications on Cortex-M embedded devices (aka Embedded ML or TinyML) by collecting real-world sensor data, training ML models on this data in the cloud, and then deploying the model back to the embedded device. The company collaborated with Arduino and announced support for the Arduino Nano 33 BLE Sense and […]

July 15, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

STM32 IoT Discovery Kit Runs AWS-Ready FreeRTOS, Supports Arduino and Pmod Expansion Boards

STMicroelectronics STM32 IoT Discovery Kit is supposed to ease software development for IoT nodes thanks to a qualified port of FreeRTOS integrated into the STM32Cube ecosystem, and ready to connect to Amazon Web Services (AWS). The hardware is comprised of an STM32L4+ Cortex-M4F microcontroller, various MEMS sensors, a secure element, and offers WiFi, Bluetooth 4.2, and NFC connectivity. STM32 IoT Discovery Kit (B-L4S5I-IOT01A) key features and specifications: MCU – STMicro STM32L4+ (STM32L4S5VIT6) Arm Cortex-M4F microcontroller with 2 MB Flash, 640 KB RAM in LQFP100 package storage – 64 Mbit Quad-SPI Flash Connectivity Bluetooth 4.1 module (STMicro SPBTLE-RF) 802.11 b/g/n compliant Wi-Fi module (Inventek ISM43362-M3G-L44) Dynamic NFC tag based on ST25DV04K with its printed NFC antenna USB – Micro USB OTG port STMicro Sensors 2 digital omnidirectional microphones (MP34DT01) Relative humidity and temperature sensor (HTS221) 3-axis magnetometer (LIS3MDL) 3D accelerometer and 3D gyroscope (LSM6DSL) 260-1260 hPa absolute digital output barometer (LPS22HB) […]

July 6, 2020July 16, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

STMicro STM32WL Wireless MCU Gets Wireless M-Bus Stack for Smart Meters

STMicro STM32WL was introduced as the world’s first LoRa SoC last year as it combined an STM32L4 Arm Cortex-M4 microcontroller with Semtech SX126x LoRa radio. The company has now partnered with Stackforce to develop a wireless M-Bus (wM-Bus) software stack that leverages the integrated sub-GHz radio and multiple modulation schemes supported by STM32WL microcontrollers. Wireless M-Bus (Wireless Meter Bus) is a wireless protocol specifically designed for remote reading of smart meters, generally gas, water, or electricity meters. The wM-Bus stack developed by Stackforce is said to comply with most of EN 13757-3/-7 specifications from lower to upper layers. The stack notably supports Wireless M-BUS modes S, T and C used throughout Europe in the 868MHz band, as well as the mode N for operation at 169MHz that also happens to be Wize frequency. Stackforce Wireless M-Bus stack for STM32WL also meets requirements for several other metering standards, including the Open […]

June 26, 2020June 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Linux powered STMicro STM32MP1 Solder-down QFN-Style SoM Measures 27x27mm

STMicro STM32MP1 Cortex A7/M4 processor was launched last year with support for Linux and Android. Since then we’ve seen a few STM32MP1 SBC‘s, development kit and modules, with some of the latter really compact with DHCOR STM32MP157 SoM found on Avenger96 board measuring just 29x29mm. Direct Insight has now unveiled QFN-style solder-down QSMP systems-on-module based on STM32MP1 that measure just 27 x 27 x 2.3mm and manufactured in Germany by Ka-Ro Electronics. Direct Insight / Ka-Ro STM32MP1 QSMP modules specifications: SoC QSMP-1510 module – STMicro STM32MP151A single-core Cortex-A7 processor up to 650 Mhz, plus Arm Cortex-M4 real-time core up to 200 MHz QSMP-1530 module – STMicro STM32MP153A dual-core Cortex -A7 processor up to 650 MHz, plus Arm Cortex-M4 real-time core up to 200 MHz QSMP-1570 module – STM32MP157C dual-core Cortex -A7 processor up to 650 MHz, plus Arm Cortex-M4 real-time core up to 200 MHz and Vivante 3D GPU with […]

June 8, 2020April 15, 2023 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linux 5.7 Released – Main Changes, Arm, MIPS and RISC-V Architectures

OK… I’m a bit late on that one. Linus Torvalds released Linux 5.7 last week: So we had a fairly calm last week, with nothing really screaming “let’s delay one more rc”. Knock wood – let’s hope we don’t have anything silly lurking this time, like the last-minute wifi regression we had in 5.6.. But embarrassing regressions last time notwithstanding, it all looks fine. And most of the discussion I’ve seen the last week or two has been about upcoming features, so the merge window is now open and I’ll start processing pull requests tomorrow as usual. But in the meantime, please give this a whirl. We’ve got a lot of changes in 5.7 as usual (all the stats look normal – but “normal” for us obviously pretty big and means “almost 14 thousand non-merge commits all over, from close to two thousand developers”), So the appended shortlog is only […]

May 15, 2020July 3, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Stinger96 (NB-IoT + eMTC) and Avenger96 96Boards STM32MP1 SBCs Giveaway

96Boards, Arrow Electronics, STMicro, and Shiratech have joined hands to organize a giveaway event with up to 500 Avenger96 or Stinger96 boards going to lucky winners. I’ve already covered STM32MP1 powered Avenger96 SBC compliant with 96boards CE Extended specification, but I’ve never heard about Stinger96 board, so before going into the giveaway rules, let’s have a closer look at this new 96Boards board designed by Israel based Shiratech. Stinger96 96Boards NB-IoT + eMTC SBC Specifications: SoC – STMicro STM32MP157 dual-core Arm Cortex-A7 processor @ up to 650 MHz (4158 CoreMark) with Arm Cortex-M4F MCU @ up to 200 MHz (673 CoreMark), 708KB internal SRAM System Memory – 256M x 32-bit DDR3 (1GB RAM) Storage – 8Gbit SLC NAND Flash, MicroSD card slot Connectivity Gigabit Ethernet header (via Microchip KSZ9031RNX) GPS, NB-IoT & eMTC (LTE Cat M1) IoT cellular connectivity with 2G fallback via Quectel BG96 module, SIM card slot, and […]

April 23, 2020April 23, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Qt for MCUs 1.1 Adds Support for more STM32 and NXP i.MX RT Boards, FreeRTOS

The first stable version of Qt for MCUs was released in August 2019 in order to bring Qt graphical toolkit to microcontrollers such as STMicro STM32F7, Renesas RH850, or NXP i.MX RT1050. Qt for MCUs would run bare metal on supported boards, and software engineers would develop graphical interface using QML and C++. Qt for MCUs 1.1 has just been released with the addition of more STM32 and i.MX RT boards, support for FreeRTOS real-time operating system, and more. Qt for MCUs 1.1 highlights: Five new supported boards: NXP i.MX RT 1064 EVK, STM32 H750B-DK, STM32 F469i-disco, STM32 L4R9i-disco, and STM32 L4R9i-eval Asset management Optional PNG compressions for assets to lower storage footprint Option to read data directly from flash memory for lower RAM consumption, or copy to RAM for better performance, at the cost of higher RAM consumption. FreeRTOS support (technology preview) to run background tasks without blocking the […]