Testing Category - Page 121 of 158 - CNX Software

January 13, 2015 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

How to Upgrade Firmware in HiSilicon Hi3798M TV Boxes

HiSilicon based Android TV boxes are not that popular, at least outside of China, but I’ve got one with BFS 4KH featuring HiSilicon Hi3798M processor, and since we could not fix AC3 audio decoding after a factory reset in the firmware I have, the company provided me with a new firmware, and I’ll document the procedure I followed below. Download the firmware, the file should be update.zip. For BFS 4KH, I could get it @ http://pan.baidu.com/s/1kTrCcMr (password: xpef). It includes YouTube and Google Play, but not the Rainbow launcher, nor XBMC, but these can be side-loaded. Now copy update.zip on the root of a USB flash drive formatted with FAT32, and at least 1GB free storage. Connect the USB flash to the USB 2.0 port of the device, as the USB 3.0 port can’t be used for firmware upgrade. In the current firmware, go to Settings->System->Local Update, and select the […]

January 11, 2015January 21, 2016 by Jean-Luc Aufranc (CNXSoft) - 62 Comments

Review of BFS 4KH Media Player Powered by HiSilicon Hi3798M Processor

Buyforsure (BFS) 4KH is a low cost Android TV box powered by HiSilicon Hi3978M quad core Cortex A7 processor supporting 4K video output and decoding, HEVC/H.265 video decoding, and featuring a USB 3.0 port. I’ve already taken a few pictures of the device and board, so today I’ll reports about my findings after testing features and performance of this media player. First Boot, Settings and First Impressions The remote control included in the package does the job as long as you use the box user interface and play videos with the included player or XBMC, but I also switched to Mele F10 Deluxe air mouse when I need a pointer or to input text. I’ve connected an Ethernet cable, an HDMI cable, a USB 3.0 hard drive to the USB 3.0 port, and a USB hub to the USB 2.0 port including a USB webcam, two RF dongles for the […]

January 11, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

So This is How Allwinner A80 Cheats at Antutu Benchmark…

Ever since Allwinner A80 was released, the Antutu scores did not add up with some devices getting around 30,000 points, while other devices scoring close to 50,000 or even higher. But what about 143,430 points? Now that would be impressive, and that’s exactly what Byron got in his Tronsmart Draco AW80 box, after changing a single parameter. The screenshot above reports a Nexus 10 because he must be using one of Freatab ROM, where they often change the device name for better Google Play compatibility. Nevertheless what kind of sorcery is that? How could he achieve this? It turns out build.prop, as a key called ro.sys.hiritsu. It’s set to 30 in the stock firmware, but if you change this to 95, some magic happens, and you get the very high score above. Byron reported his box got pretty hot with this setting, so it’s probably better not to try a […]

January 6, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Easily Create an Android Bootable SD Card for Allwinner A80 Devices with PhoenixCard Tool

We’ve already seen how it was possible to boot Linux or Android on Rockchip RK3288 devices from an SD card, which involved getting the stock firmware and running some scripts in Linux. Today, Freaktab member no_spam_for_me found out how to create a bootable SD card for Tronsmart Draco AW80 Meta, and other Allwinner A80 devices using PhoenixCard 3.09 tools for Windows (The latest version should be available @ http://dl.cubieboard.org/model/cc-a80/Tools/Flash-firmware-tools/). There may also be a way to use LiveSuit tools for Linux, but this have not been tested. Once you have installed the tools, start it, and load the firmware by clicking on “Img File” button (Here Draco AW80 Finless 1.1 firmware was used). Then press DiskCheck to scan for storage devices, and select your SD card in the drop-down menu “disk” (not sure why it’s blank in the screenshot above), select “Startup !” write mode, and click on the “Burn” […]

January 6, 2015April 16, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

How to Take Screenshots and Record Videos in Android mini PCs without Root Access

I’ve started to test BFS 4KH Android TB box featuring HiSilicon HI3798M processor. I’m also the first things I normally do is to check for built-in screenshot support, and if not, I simply install a screenshot app like Screenshot Ultimate. This normally works pretty well, but the firmware is not rooted, and the usual root method for HiSilicon devices does not work, as it fails at the adb root stage with the message: “aabd cannot run as root in production builds”. So I was out of luck, and people who sent the sample for review do not seem to check / answer their email in a timely manner. ScreenShot Ultimate provides “No Capture Method Help“, but I found the instructions long, and it required me to install download and install something extra. So instead I check if I could do something with adb instead. adb can connect via USB or […]

January 4, 2015January 4, 2015 by Jean-Luc Aufranc (CNXSoft) - 48 Comments

Review of CX-S806 TV Box Powered by Amlogic S812 Processor

I’ve already reviewed one Android media player based on Amlogic S812 processor with MINIX NEO X8-H Plus. Today, I’m going to have a look at another S812 TV box, namely CX-S806, with lower specs, and less support, but that sells for half price compared to the MINIX device. I’ve already published pictures of CX-S806 media player and board, so today I’ll focus on testing the performance and features of the device. First Boot, Settings and First Impressions The package include a simple IR remote control, so I inserted two AAA batteries to give it a try, and it seemed to work OK, but as usual I switched to use Mele F10 Deluxe air mouse for the rest of the review. Since I’ve connected Ethernet and HDMI cables, a USB hard drive, a USB webcam, and a USB hub with two RF dongles for the air mouse and wireless gamepad, and […]

December 30, 2014December 30, 2014 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Iliad’s Online Labs Offers Quad Core ARMv7 Dedicated Servers

Iliad (Free) is a French company known to bring the price of technology down for the masses. Several years ago, they disrupted the Internet broadband market, by bringing low cost triple play broadband services to market, and more recently they entered the mobile market with 2 Euros 3G/4G monthly subscriptions. The company also owns Online.net providing hosting services, and which has recently launched a public preview for Online Labs cloud platform. Most hosted solutions nowadays relies on x86 servers and virtualization, but Online Labs instead features dedicated physical ARM servers connected to SSDs. The company call their custom-made credit-card size server modules C1 boards, completely unrelated to ODROID-C1 boards, as those are powered by a quad core ARMv7 Marvell processor with 2GB RAM, and a 1Gb/s network interfaces. These are then assembled into racks as shown below. And finally 16 racks are inserted into a chassis with a control board, […]

December 29, 2014December 29, 2014 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

WeTek Play Review with Android 4.2.2 Firmware v1.1.1

I had already reviewed WeTek Play Android DVB-S2 STB this summer, but at the time it was still an early sample, so the company asked me to review it again with the latest firmware that includes bug fixes and new features such as WeCloud Antenna IPTV service with over 180 Live TV channels, now that they’ve officially launched WeTek Play with either a DVB-S2 tuner as in my sample, a DVB-T/T2/C tuner, or no tuner at all. You can find pictures of WeTek Play in my unboxing post. As usual the review will include my first impressions, video testing, and various benchmark, but I’ll also have sections for WeCloud Antenna Live TV over IP service, and WeTek Theater for live TV from my satellite dish. OTA Firmware Update But first of all, I’ll test OTA firmware update, as many companies claim to support OTA updates, but you often end up […]