Testing Category - Page 122 of 169 - CNX Software

October 3, 2015October 31, 2016 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

Review of Voyo V2 Intel Atom Z3735F mini PC with Battery and SSD

Voyo V2 is another Intel Atom Z3735F mini PC pre-installed with Windows 10 Home, but it has some interesting features such as a 64GB SSD connected via a USB to SATA bridge on top of the regular 32GB eMMC, and a 5,000 mAh battery acting as a UPS. Since I have already received several of such platforms including MeLE PCG01, Wintel W8, and MeLE PCG03 and that there are usually few differences in regular benchmarks, I’ll focus on what varies between platforms: Windows activation status, storage and network performance, as well as power consumption. System Info and Windows Activation One of the shortcoming of this mini PC is that it only comes with a full sized USB port, and a micro USB port. So if you plan to use it as a PC with USB keyboard and mouse, you’ll need to use a USB hub, or at least a USB […]

October 2, 2015July 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 34 Comments

ARNU Box Mach 10 Pure Linux Review

Most TV boxes on the market are running Android, but if all you’d want to do is watching online or local videos in Kodi, a Linux box may offer a more streamlined experience, and that’s exactly what ARNU Box Mach 10 Pure Linux is offering as an Amlogic S812 TV Box running Kodi 15 Linux. In my “Arnu Box Mach 10 specs, unboxing and teardown” post, we’ve already seen the box bascially uses the same PCB used in Eny M8S, but with some different memory and storage chips. But that’s the software that’s mostly interested in this box, and today, I’ll go through the first time setup and Cloudword, before testing video playback capabilities. Setting Up ARNU Box Mach 10 Pure Linux So I’ve just connected an HDMI cable, an Ethernet cable, and the power adapter to get started, and the very first time you’ll go through a detailed setup […]

September 30, 2015October 5, 2015 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

Voyo V2 mini PC Unboxing and Teardown

Voyo V2 would be yet another Intel Atom Z3735F based mini PC if it did not have a battery, and 96GB internal storage with 32GB eMMC flash, and a 64GB SSD. Most Atom mini PCs only comes with 32GB, and based on my experience, internal storage fills pretty quickly with Windows 10 or 8.1, especially if you intend to use the device as a desktop PC, and that even may be an issue with Linux distributions, albeit to a lesser extend. However, a lot of questions were asked about that “64GB SSD”, with even some readers suggesting it might be an internal SD card instead of SSD :). Today, we’re going to find out the truth as GearBest kindly sent me a sample for review. Voyo V2 Unboxing The mini PC package has a sticker in Chinese showing the brand (VOYO), model (MiniPC-Box_V2), and listing memory ans storage as “2GB+32GB […]

September 29, 2015June 11, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

ARNU Box Mach 10 Pure Linux TV Box Specs, Unboxing, and Teardown

Theater in a Box sent me not one – as expected – but two of their latest “Pure Linux” Kodi media player: ARNU Box Mach 10 powered by Amlogic S812 SoC, and ARNU Box Q based on Amlogic S805 processor. The former has a faster processor, and supports 4K, while the later is cheaper but is limited to 1080p. Today, I’ll have a look at the hardware of both devices, starting with ARNU Box Mach 10, before completing the S812 Linux box review in a few days. ARNU Box Mach 10 Specifications The hardware specifications are pretty similar to what the rest of the market is offering: SoC – Amlogic S812 quad core cortex A9r4 @ 2.0 GHz with octa-core Mali-450MP6 GPU System Memory – 2 GB DDR3 Storage – 16 GB flash, SD card slot Connectivity – 10/100M Ethernet, dual band 802.11 b/g/n Wi-Fi, Bluetooth 4.0 (AP6330 wireless module) […]

September 27, 2015July 25, 2024 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Using USB123 USBee AX Pro $5 USB Logic Analyzer with PulseView in Linux

I recently wrote about an ultra low cost USB logic analyzer called USB123 USBee AX Pro, which I bought for $9.58 on DX, but I was later informed it also goes for $5.44 on Aliexpress including free shipping to most countries, and a few dollars extra for shipping to some other countries. Nevertheless, I’ve now received it, and instead of testing it with a closed source (and cracked) Windows software, I installed and ran PulseView open source graphical interface for sigrok, which I previously tested on UNI-T UT61E digital multimeter. The package includes USBee AX PRO mini logic analyzer, 10 dupont wires for 8 channels (digital only) and 2 ground pins, as well as a mini USB to USB cable for connection to a computer. The instructions to use the logic analyzer can be found on Sigrok Wiki. My computer runs Ubuntu 14.04, but Sigrok and PulseView can also be […]

September 26, 2015November 3, 2015 by Jean-Luc Aufranc (CNXSoft) - 44 Comments

Status of Orange Pi Boards GPIO Support

Yesterday, one person asked me to make a video showing GPIO control on Orange Pi 2 mini on YouTube, and since I have just completed a post about Orange Pi camera, I thought it might be fun to check GPIO support too. This post focuses on Allwinner H3 boards, but the instructions and status should be very similar for Allwinner A20 and A31s versions. One of the first things you want before starting playing with GPIOs is the expansion header’s pinout chart, and I could not find any until I had the idea to check for schematics, which are available on Orange Pi resources page. I downloaded the schematics for Orange Pi 2, which should be the same as for Orange Pi 2 mini as the only difference is the lack of WiFi module. Orange Pi PC is a little different, and the schematics are nowhere to be found, but […]

September 26, 2015July 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

How to Use Orange Pi Camera in Linux (with Motion)

Earlier this month, I wrote a Quick Start Guide for Orange Pi Allwinner H3 boards such as Orange Pi PC, and showed how to install and configure Debian on the boards. I’ve also received the $5.90 Orange Pi camera, which when combined an Orange Pi PC, costs around $27 including shipping. So today, I’ve attached the CSI camera to my Orange Pi 2 mini board, and used it with motion to transform for the board into an IP camera. First, you’ll need to insert the camera into CON1 connector with the camera facing the ceiling, and close the black clip to keep it in place. Now connect all cable and power on your board. First, I studied the steps described on that forum thread, and modified Allwinner configuration files, but after one or two hours, I found out some work at been done since May, and it was now much […]

September 25, 2015September 25, 2015 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Mini Review of Semlamp SL-011 Audio Controlled Relay for Home Lighting

Last month, I wrote about Semlamp SL-012 a smartphone controlled light switch for 2 lamps that sells for about $11 on DX, and contrary to most others don’t use Bluetooth, nor Wifi, but instead a simple microphone. I decided to try it out by purchasing SL-011 model, controlling only one light, for $8.22 on DealExtreme. Semlamp SL-011 Unboxing and Teardown That’s the package with some instructions in Chinese. The device has black and red wires to connect to 220V on the right of the picture below, blue and brown wires to connect to the lamp, and a microphone attached via a white cable. It’s quite easy to take apart, as they are just two screws to remove, and you can easily pop-up the bottom part of the case to access the board. The top of the board features JQC-3FF 24V relay supporting up to 10A @ 277VAC, as well as […]