Video Category - Page 289 of 331 - CNX Software

March 26, 2013November 7, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

OpenELEC 3.0.0 on Raspberry Pi – Installation and Video Tests

Yesterday, OpenELEC developers announced the release of OpenELEC 3.0.0, a lightweight OS running XBMC Frodo 12.1 for several platforms including the Raspberry Pi (OpenELEC stands for Open Embedded Linux Entertainment Center). When the Raspberry Pi was initially released, I did not feel like testing it as a media center, mainly because of codecs limitations. But over time, this has improved with the availability of MPEG-2 and VC-1 codecs (for a fee), and GPU accelerated support for free codecs such as VP6 and VP8, so today I’ve tested to give a try and install OpenELEC 3.0.0 on my Raspberry Pi. I’ll first give installation instructions, then test several types of videos container formats, and video / audio codecs, as well as give some quick impression about the performance and stability of OpenELEC on this low cost board. Installing OpenELEC on Raspberry Pi To install OpenELEC, I basically followed the instructions provided […]

March 25, 2013 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

Ubuntu 11.10 Image for Hi802 / GK802 is Now Available for Download

About 2 weeks ago, Jasbir released an Ubuntu 11.10 image and installation instructions for GK802 and Hi802 mini PCs based on Freescale i.MX6. I could only find time to give it try yesterday and today. I’ll provide the steps I followed to install the image, and my quick first impressions of the stability and performance of this image. Installation Instructions I mainly followed the instructions provided by Jasbir, and run GParted to increased the partition size on my micro SD card. The image is for a 8 GB micro SD, but those instructions should work on 4GB SD card and greater, as the rootfs partition is only 3GB large. Download the Ubuntu 11.10 image, uboot, as well as the kernel image and modules in a Linux PC:

wget http://dl.miniand.com/jas-hacks/gk802/ubuntu_gk802.img.gz
wget http://dl.miniand.com/jas-hacks/gk802/u-boot.imx
wget http://dl.miniand.com/jas-hacks/gk802/uImage_3.0.35-0269_cpu_freq
wget http://dl.miniand.com/jas-hacks/gk802/modules_3.0.35-02695.tar

wget http://dl.miniand.com/jas-hacks/gk802/ubuntu_gk802.img.gz

wget http://dl.miniand.com/jas-hacks/gk802/u-boot.imx

wget http://dl.miniand.com/jas-hacks/gk802/uImage_3.0.35-0269_cpu_freq

wget http://dl.miniand.com/jas-hacks/gk802/modules_3.0.35-02695.tar

Copy the image, uboot and the kernel to the micro SD card by typing the commands below:

gzip -d ubuntu_gk802.img.gz
sudo dd if=ubuntu_gk802.img of=/dev/&lt;sd_device&gt;
sudo dd if=u-boot.imx bs=1k seek=1 of=/dev/&lt;sd_device&gt; &amp;&amp; sync
sudo dd if=uImage_3.0.35-0269_cpu_freq of=/dev/&lt;sd_drive&gt; bs=1048576 seek=1 &amp;&amp; sudo sync

gzip -d ubuntu_gk802.img.gz

sudo dd if=ubuntu_gk802.img of=/dev/<sd_device>

sudo dd if=u-boot.imx bs=1k seek=1 of=/dev/<sd_device> && sync

sudo dd if=uImage_3.0.35-0269_cpu_freq of=/dev/<sd_drive> bs=1048576 seek=1 && sudo sync

Replace /dev/<sd_device> by your […]

March 25, 2013November 23, 2023 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Z1 Android 2.2 Smart Watch Phone

There’s currently a lot of articles about Apple, Samsung, and Google smart watches rumors in the blogosphere. I’ve written about other smartwatches in the past with products such as the Pebble or Wime Nanowatch, but those are based on low-end hardware that do not run Android directly, but instead communicate with your Android or iOS device via Bluetooth. The only watch I know that runs (a customized version of) Android is the “I’m Watch“. You’ll need relatively deep pockets to purchase it as price starts at 249 Euros / $349 US and goes up to $19,999 if you purchase the version with white gold and diamonds. So I decided to have a look if there are lower cost Chinese Android smartwatches around. The Z1 Android Smart Watch Phone showed up everywhere in my searches. The product is not new, as Charbax first discovered it in January 2012 and it was […]

March 21, 2013March 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Nvidia Updates its Tegra Roadmap with Parker 64-Bit ARM SoC, Unveils Kayla CUDA Development Platform

Nvidia has given an update about the roadmap for its Tegra processor at the GPU Technology Conference in San Jose, California. Tegra 4 will still be followed by Logan (Tegra 5) as planned with a Kepler GPU and support for CUDA and OpenGL 4.3, but “Stark” has been replaced by “Parker” (Tegra 6) which will be the first 64-Bit Tegra processor based on Denver CPU, Maxwell GPU and make use of Finfet transistors. Logan will be available in 2014, and Parker should be available in 2015 with 100 times more performance than Tegra 2. With this kind of performance, the separation line between desktop and mobile processors will be gone. Nvidia also unveiled Kayla (“Logan’s girlfriend”), a development platform for CUDA and OpenGL based on Tegra 3 quad-core ARM processor and a Kepler GPU connected via a PCI express slot. Jen-Hsun Huang (above) showcased Kayla performance by running real-time ray […]

March 20, 2013 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

$19 RFDuino is a Coin-sized Bluetooth Arduino-compatible Board

RFDuino is a tiny board, about the size of a coin, powered by Nordic nRF51822 Cortex M0 SoC including bluetooth 4.0 LE support, and software compatible with Arduino UNO and DUE board, so you can just use Arduino sketches with the board. Bluetooth allows it to communicate with your smartphone (iPhone for now, but Android support is coming) to control motors & relays, monitor sensors, turn LEDs on/off, and more. Key features of RFDuino board: MCU – Nordic nRF51822 Cortex M0 @ 16 MHz Memory – 16 KB on-chip SRAM Storage – 256 KB on-chip Flash Connectivity – Bluetooth 4.0 Low Energy built in MCU GPIO – 7 pin software configurable as digital IO, analog ADC, SPI, I2C, UART and PWM. The company currently offers several stackable shields for RFDuino including battery shields (1x AAA, 2x AAA, and CR2032 coin battery), a servo shield, a USB shield, a prototype shield […]

March 14, 2013February 22, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Ittiam HEVC Decoder To Provide H.265 Video Decoding for Existing ARM Cortex-A Devices

H.264 is now the favorite codec for many applications, and all ARM SoC providing multimedia capabilities support it. However, a new codec called H.265 (aka HEVC) is coming with twice the compression ratio with the same quality saving a lot of money for those who have to pay for the bandwidth. The transition between video codecs is normally a slow process, but as it happens you may wonder if you’ll be able to play H.265 videos on your existing ARM Cortex A9/A15 devices which do not support H.265 hardware video decoding. The answer appears to be “Yes You Can!”, as Ittiam Systems announced an HEVC decoder specifically designed for ARM Cortex A processors. More specifically their software decoder will support: ARMv7 Cores with NEON – Cortex A8, Cortex A5, Cortex A9, Cortex A15, Cortex A7 and the multi core variants Qualcomm Snapdragon APQ8064/MPQ8064 , MSM8960 Ittiam HEVC decoder mainly targets devices such […]

March 12, 2013March 30, 2013 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Latest Tronsmart Prometheus Firmware Features Android 4.2 and XBMC with Video Hardware Decoding

Last month I reviewed Tronsmart Prometheus, and I was pretty satisfied with the device except some bugs. There’s no a firmware update that should fix AC3/DTS static noise issues in this set-top box. Prometheus also becomes one of the first set-top boxes to support the latest Android Jelly Bean 4.2, and comes with an XBMC version supporting hardware decode using XBMC user interface, and not an external media player such as DicePlayer or MX Player. You can download the firmware ( 2013-3-08(4.2_root_ac3_dts_market_xbmc).zip), and install it using the upgrade procedure on Tronsmart website. I’m on the road, so I can’t try the firmware myself right now (which also explains why I haven’t posted in the last few days), but Geekuying has upload a short video showing XBMC with video hardware acceleration on the device. (Previous firmware in Android 4.1.2). Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, […]

March 7, 2013December 7, 2023 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

The Mojo – $65 FPGA Development Board Powered By Xilinx Spartan 6

Embedded Micro has started a kickstarter campaign to fund an FPGA board called “the Mojo”, “designed to be user friendly and a great introduction into digital design”. The board is powered by a Xilinx Spartan 6 FPGA that comes with over 9,000 logic cells, and will allow you to design digital circuits composed of a bunch of logic and, or, nor, etc… gates connected together to perform a specific task. Here are the features of “The Mojo”: Spartan 6 XC6SLX9 FPGA – 9,152 logic cells for your largest designs 84 general purpose digital IO pins (3.3V logic level) 8 analog inputs 8 user controlled LEDs A USB connection (new revision) to configure the FPGA and send receive data from your design On board voltage regulation (4.5V – 12V input, 3.3V and 1.2V outputs) 8 MHz on-board clock (can be multiplied internally by the FPGA) A reset button to be used in your designs […]