Video Category - Page 302 of 331 - CNX Software

October 17, 2012October 20, 2012 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

$89 Hiapad Hi802 Android mini PC Based on Freescale i.MX6 Quad Processor

The first (single core) mini PCs showed up in May, the dual core mini PCs in August, and the first quad core mini PCs should be available in November starting with Hiapad Hi-802 HDMI TV Stick powered by Freescale i.MX6 Quad Cortex A9 processor with 1GB RAM. The specs of the device are not available publicly, but based on diverse sources (including charbax video below), it should be as follows: SoC – Freescale i.MX6Q Quad Core Cortex A9 Processor with Vivante GC2000 GPU System Memory – 1GB RAM Storage – 16? GB NAND Flash Memory + microSD card slot Video Output – HDMI Connectivity – Built-in Wifi 802.11 b/g/n and Bluetooth USB – USB Host + USB OTG A picture of the PCB (one side only) has been uploaded by Hiapad. There are 6 through holes at the top left of the PCB which might be some debug ports (TBC […]

October 10, 2012 by Jean-Luc Aufranc (CNXSoft) - 53 Comments

Droid Stick A2 – AMLogic AML8726-MX Dual Core Android 4.1.1 mini PC

Since it was first announced in August, Rockchip RK3066 dual core mini PCs have been popping up everywhere, and AFAIK those are currently the only low cost (sub $100) dual core Android TV Sticks available. But according to a recent Kimdecent announcement, this is about to change with the release of the Droid Stick A2 based on AMLogic AML8726-MX Dual Core Cortex A9 processor with 1GB RAM and 4 to 8 GB Flash running Android Jelly Bean. Here are Droid Stick A2 specifications: CPU – Amlogic AML8726-MX Dual Core Cortex A9 @ 1.5 GHz GPU – Mali400 Dual Core, 2D/ 3D/ OpenGL ES2.0/ OpenVG1.1. System Memory – 1 GB RAM Storage – 4/8 GB Nand Flash + microSD card slot (up to 32GB) WiFi – 802.11b/g/n Video Output – HDMI (1080P) Video Decoding – Supports up to 1920x1080p@60fps Video Encoding – Supports encoding in H.264. 1080p@60fps, 720@100fps USB – 1xUSB […]

September 19, 2012September 19, 2012 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

$25 Outbreak Galago – Cortex M3 Open Hardware Development Kit

Outbreak Galago is a tiny development kit based on a Cortex M3 processor that fits a debugger, and is destined for rapid electronics prototyping. The company promotes it as some sort of Arduino board on steroid (MCU wise) and sells for $25 on kickstarter, and less than $10 in 10k quantities. Here are the board specifications: 72 MHz 32-bit ARM CPU with 32KB of flash ROM and 8KB of RAM (NXP LPC1313 TBC) Integrated hardware debugger One high-speed SPI port, up to 36 Mbps One high-speed I2C port, up to 1.5 Mbps One UART/USART with hardware flow-control capability, up to 256 kbps 10 high-speed PWM pins, 6 driven by 32-bit (high-resolution) timers 6 ADC (analog) input pins with 10-bit resolution at over 400 KSa/sec 25 GPIO (digital) input/output pins The form factor and built-in debugger (via USB) are not really new, as those are already featured in devkit such as TI Piccolo controlSTICK, […]

August 30, 2012August 30, 2012 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Samsung Unveils EK-GC100 Galaxy Camera Running Android 4.1

Following Nikon steps with its Coolpix S800c, Samsung announced their own Android camera. Samsung EK-GC100 camera features an Exynos 4412 quad core Cortex A9 processor, a 4.8″ touchscreen display (1280×720), Wi-Fi and 3G or 4G connectivity (depending on model), a 16MP camera with a 21X optical zoom, and runs Android Jelly Bean. Samsung Galaxy Camera specifications: OS – Android 4.1 (Jelly Bean) Processor – 1.4GHz Quad-Core processor Memory – 8GB ＋ memory slot : micro SDSC, micro SDHC, micro SDXC Display – 121.2 mm (4.8″), 308 ppi, HD Super Clear Touch Display Image Sensor – 16.3 effective megapixel 1/2.3″ BSI CMOS Lens – F2.8, 23 mm, 21x super long zoom IS – OIS (cnxsoft: what is that?) (Optical Image Stabilization) – See Ganesh comment below for details explanation, in case you don’t know this. ISO – Auto, 100, 200, 400, 800, 1600, 3200 Network – 4G, 3G (HSPA＋ 21Mbps): 850 […]

August 30, 2012 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Nvidia Has Ported Unreal Engine 3 to Windows RT

After Archos GamePad, more gaming news today, as Nvidia announced Unreal Engine 3 port to Windows RT. The company showcased Epic Citadel demo on Nvidia Tegra 3 based Asus Vivo Tab RT (previously known as Tablet 600) at a press conference held at IFA 2012, in Berlin. The demo above is the full PC implementation running on ARM hardware and renders graphics at 35 to 40fps. The Unreal Engine 3 “Epic Citadel” demo implements the full DirectX 9 pipeline, with shaders and materials. Nvidia also announced that UE3 Windows RT code is available to licensees from Epic now. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011. www.cnx-software.com

August 27, 2012August 29, 2012 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

$86 ZAP-A10 Android 4.0 Set-Top Box Powered by AMLogic AML8726-M3

You may already know that XBMC has been working on the Pivox XIOS DS set-top box based on AMLogic AML8726-M3. Pivosgroup has sponsored the development of XBMC for Android and Linux on their new media player, and it costs about $115 on sites like Amazon, but it’s not available worldwide right now. If you’re looking for an alternative AMLogic AML8726-M3 device, and are a bit adventurous, you may have a look at the ZAP-A10, an Android 4.0 networked media player featuring AML8726-M3 Cortex A9 processor, with 1GB RAM and 4 GB Flash. Here are the specs of this set-top box: SoC – Single core Cortex A9 @ 1GHz (AML8726-M3) with Mali-400 GPU System Memory – 1 GB RAM Storage – 4GB Flash & SD card slot Connectivity 10/100M Ethernet Wi-Fi 802.11 b/g/n USB – 4x USB Host port Video Output – HDMI and component (YPbPr) Video Containers – M2TS / […]

August 25, 2012May 1, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

MPEG2 and VC-1 Codecs, H.264 Encode and HDMI CEC Are Now Available for the Raspberry Pi

Many people appear to have bought the Raspberry Pi in order to use it as a cheap media player by installing distributions such as Raspbmc or OpenElec. The only problem is that this low cost board was primarily designed as an educational platform, so the Raspberry Pi foundation only paid for H.264 licensing, which means you could only playback H.264 videos, and all other video codecs could not be played (by hardware) making it a rather poor media player. But things have improved, as the good people at the Raspberry Pi foundation have worked out a deal with the licensing organizations and now offer support for 2 new codecs: MPEG2 license key – 2.4 GBP (~3.8 USD) VC-1 license key – 1.2 GBP (~1.9 USD) Once those 2 codecs are enabled you should be able to play your DVD rips and most HD wmv files smoothly. The way it work […]

August 23, 2012August 23, 2012 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Nikon Announces Coolpix S800c Android 2.3 Camera

Nikon announced the first Android camera to hit the market. The Coolpix S800c is a 16 MP Wi-Fi camera powered by an unnamed ARM Cortex A9 processor with 512 MB RAM running Android 2.3.3 that will sell for $349. The S800c is basically a smartphone without the voice network capabilities, but with a proper camera capable of shooting clear pictures and videos, and a 10x optical zoom. Nikon also included a GPS to add localization info to pictures. Nikon lists the primary features of their Android camera as follows: Android 2.3 and Wi-Fi Simple setup and connection Browse and post to social networking sites (SNS) such as Google+, Facebook and Twitter. Support for Google Play and built-in Google apps Simple image transfer to other smart devices via “Upload to Smart Device” app. Better shooting performance and images quality and definition (compared to a smartphone). 10x optical zoom, NIKKOR lens and […]