4g lte

Posted on by Debashis Das - 8 Comments on Mcuzone MP4GM 4G LTE PCIe Module for Raspberry Pi 5 also adds three USB 2.0 interfaces

Mcuzone MP4GM 4G LTE PCIe Module for Raspberry Pi 5 also adds three USB 2.0 interfaces

Pi5 PCIE 4G LTE Module with USB

Mcuzone recently announced the MP4GM, a new 4G LTE module for the Raspberry Pi 5 SBC. This module connects to the Raspberry Pi 5 via PCIe and includes three extra 1.25mm JST connectors for three additional USB 2.0 interfaces. This HAT is compatible with various 4G LTE mini PCIe modules from Mcuzone and Fibocom, providing flexible options for 4G connectivity. We have previously covered a 5G Modem Kit for the Raspberry Pi 5, but this is the first time we have found out about a 4G LTE kit designed for the Pi 5. We have also covered Mcuzone RK3308 SoM and the MDK3308-EK Evaluation Kit, designed for smart voice applications as well as a Raspberry Pi CM4 board with dual Ethernet capabilities all from MCUzone. So, feel free to check those out if you are interested in their products. Mcuzone MP4GM 4G LTE module specification: Model – MP4GM PCIe to […]

Posted on by Sponsored Post - No Comments on Azulle’s Byte4 – Customization at Its Finest With 3 Stellar Add-on Modules (Sponsored)

Azulle’s Byte4 – Customization at Its Finest With 3 Stellar Add-on Modules (Sponsored)

Azulle BYTE4 modules

In the ever-evolving world of technology, we often find ourselves at a crossroads between power and flexibility. Striking the perfect balance can be a daunting task, but sometimes innovation comes along to redefine the game. Enter Azulle’s Byte4, a desktop mini PC that reimagines computing by seamlessly integrating three stellar add-on modules: Active Cooling, 4G LTE (AT&T Certified), and Power over Ethernet (POE). As a leading manufacturer of mini PCs and mini PC sticks, Azulle firmly believes that innovation should simplify our lives rather than complicate them. With that in mind, one of our flagship products, the Byte, embodies this philosophy in its modular design, allowing users to tailor their computing experience to their unique needs without the hassle of complicated setups. Active Cooling: A Shield Against the Heat Traditional cooling solutions often come at the cost of space and noise. Unlike the conventional cooling mechanisms that merely whisper their […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 10 Comments on ASUS unveils Tinker V RISC-V single board computer, Tinker board 3 SBC with Rockchip RK3568 SoC

ASUS unveils Tinker V RISC-V single board computer, Tinker board 3 SBC with Rockchip RK3568 SoC

ASUS Tinker V RISC-V SBC

ASUS IoT has added two new members to the Tinker board family with the Tinker V and Tinker Board 3 single board computers powered by respectively Renesas RZ/Five single-core RISC-V SoC and Rockchip RK3568 quad-core Arm Cortex-A55 processor. ASUS Tinker V RISC-V SBC Tinker V specifications: SoC – Renesas RZ/Five single core AndesCore AX45MP RISC-V processor clocked at 1.0 GHz System Memory – 1GB DDR4 Storage – MicroSD card slot, optional 16GB eMMC flash, optional SPI flash Networking – 2x Gigabit Ethernet RJ45 ports USB – 1x Micro USB port, 1x Micro USB (OTG) port Serial – 2x CAN Bus via 6-pin terminal block 2x COM RS232 via 5-pin terminal block Expansion – 20-pin GPIO header with up to 2x UART, 2x I2C, 4x GPIO, 2x ADC, 1x SPI, 3.3V, and GND Debugging – JTAG pin header Power Supply – 10 to 24V DC via 5.5/2.5 mm DC barrel jack […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Arduino-shaped development board ships with a Nordic Semi nRF9160 module

Arduino-shaped development board ships with a Nordic Semi nRF9160 module

Arduino nRF9160 development board

Actinius Icarus SoM DK development board follows the Arduino Uno form factor and is equipped with the company’s Icacus SoM based on Nordic Semi nRF9160 system-in-package with LTE Cat-M, NB-IoT, and GPS connectivity. The development kit provides an eSIM on the module and an additional Nano SIM socket on the mainboard, Arduino headers for a wide range of I/Os and compatibility with Arduino Shields, a set of user LEDs, reset and user buttons, and a battery charging port. Icarus SoM DK specifications: Icarus SoM SiP – Nordic Semi nRF9160-SICA system-in-package with Arm Cortex-M33 MCU, 1024 KB flash, 256 KB SRAM, and LTE Cat-M1 (eMTC), Cat-NB1 (NB-IoT), and GPS  connectivity Storage – 64Mbit SPI flash On-board eSIM Antennas – 2x u.FL connectors for LTE and GPS Sensor – Low power 3-axis accelerometer I/Os – 2x 20 castellated holes with GPIOS, I2C, SWD, Reset, SIM card signals, and power pins Supply Voltage […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 14 Comments on Inexpensive, Snapdragon 410-based “4G LTE WiFi Modem” made to run Debian 11

Inexpensive, Snapdragon 410-based “4G LTE WiFi Modem” made to run Debian 11

4G LTE WiFi Modem Debian 11 Linux 5.15

Some ultra-compact 4G LTE wireless routers housed in what looks like a largish USB dongle are based on Qualcomm Snapdragon 401 (MSM8916) quad-core Cortex-A53 processor and have been hacked to run Debian 11 with Linux 5.15 instead of the pre-loaded Android OS. Soon after Extrowerk had purchased a ~$20 “4G LTE WiFi modem” USB dongle, he noticed it would show as “Android” when connected to his PC. It also turned out that Chinese hacker HandsomeYingYan had already done some work on the device modding the lk2nd bootloader and the Linux kernel for the OpenStick project for “mainline Linux on msm8916-based 4G USB modem”, and documented his work (in Chinese) to run Debian 11 on the “4G USB WiFi Modem” pictured below. Let’s go through some of the specifications of the said wireless router: SoC – Qualcomm Snapdragon 410 (MSM8916) quad-core Arm Corte-A53 processor with System Memory – 512 MB RAM […]