Android News - Page 123 of 375 - CNX Software

July 12, 2017July 12, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Xnano X5 4K TV Box with Gigabit Ethernet, HDMI Input, USB 3.0, and SATA Goes for $68 and Up

Realtek RTD1295 processor allows for 4K TV boxes with DVR and PiP function through HDMI input, and USB 3.0 and SATA 3.0 storage interfaces. I previously reviewed Zidoo X9S and EWEAT R9 Plus based on the solution, and I especially liked support with NAS function through OpenWrt running side-by-side with Android 6.0. Those are high-end devices that cost well over $100, but we’ve recently seen cheaper models, likely with less refined firmware, no metal case, and possibly lacking OpenWrt that go as low as $78 shipped with LAKE I Home Cloud TV box. We can now get an even cheaper model, albeit with just 1GB RAM and 8GB flash, thanks to Xano X5 sold for $68.32 including shipping on Aliexpress. There’s also a 2GB/16GB version on the same page going for $82.76. Xnano X5 Smart Box specifications: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 […]

July 11, 2017July 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

MA8-4K is a $19 Android TV Box based on Rockchip RK3229 Processor (Promo)

MA8-4K is yet another TV box running Android 5.1 on Rockchip RK3229 quad core Cortex A7 processor, but it might one of the cheapest right now, as GearBest offers it for $18.99 shipped with GBMA87 coupon instead of $27.99 “flash sale” price. This is likely valid for only a few hundred boxes. MA8-4K specifications: SoC – Rockchip RK3229 quad core ARM Cortex A7 processor @ 1.5 GHz with ARM Mali-400MP2 GPU System Memory – 1GB DDR3 Storage – 8GB flash + micro SD card slot up to 32GB Video Output – HDMI 2.0 up to 4K2K @ 60 fps, and 3.5mm AV output (composite) Audio Output – HDMI, AV, and coaxial S/PDIF Connectivity – 10/100 Mbps Ethernet, 802.11 b/g/n WiFi (AP6051 chip); Bluetooth is mentioned in title, but not in description, so it’s unclear whether it’s implemented. USB – 2x USB 2.0 host ports Power Supply – 5V/1.5A Dimensions – […]

July 9, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Jolla Tablet Take 2 – Youyouta Tablet Runs Linux Based Sailfish OS 2.1 Operating System (Crowdfunding)

Jolla Tablet running Linux based Sailfish OS was launched in 2014 via Indiegogo, and the campaign was initially very successful having raised over 2.5 million dollars, but eventually it became a disaster as the company had some financial issues, and the tablet was canceled with on a few backers having received their tablet. The company eventually organized a refund program, so it did not end up being as bad as it first seemed. But there’s now a “new” SailFish OS tablet – Youyouta tablet – that has been launched on Indiegogo last month. Jolla is not handling the manufacturing and campaign, and instead it’s done by a third party who is paying license fees to Jolla for Sailfish OS. They re-used most parts of the hardware design from original Jolla tablet plus a few modifications like option for higher storage capacity: SoC – Intel Atom Z3735F quad core “Bay Trail” […]

July 7, 2017May 8, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Qualcomm Snapdragon 212 Boards – Intrinsyc Open-Q 212 and Kaynes Technology SKATE-212

Qualcomm Snapdragon 212 (APQ8009) quad core Cortex A7 processor is used in entry-level smartphones, but it’s also one of the processors which the company expects to use in their Smart Speaker Platform leveraging Google Assistant, Amazon Alexa, and other A.I. voice services. Two company has designed single board computers that can be used for this purpose: Intrisync Open-Q 212 and Kaynes Technology SKATE-212. Intrisync Open-Q 212 SBC Development Board Contrary to some other Open-Q boards, but not all, Open-Q 212 is not comprised of a baseboard and a system-on-module, as everything is soldered on a single PCB. Open-Q 212 specifications: SoC – Qualcomm Snapdragon 212 (APQ8009) quad core ARM Cortex A7 processor @ 1.267GHz with Adreno 304 GPU, QDSP6 DSP System Memory – 1GB LPDDR3 Storage – 8GB eMMC (non-POP) flash and micro SD card socket Connectivity – Ethernet, pre-scanned Wi-Fi 802.11n 2.4Ghz (WCN3610) with chip and U.FL antennas, Bluetooth 4.1 […]

July 6, 2017July 28, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Vorke Z3 Rockchip RK3399 TV Box Review – Part 2: Android 6.0 Firmware

Vorke Z3 is another mini PC / TV box powered by Rockchip RK3399 hexa core processor with two Cortex A72 cores, and two Cortex A53 cores making it theoretically one of the fastest TV boxes on the market, excluding NVIDIA Shield Android TV which is well ahead of the competition, albeit with poor worldwide availability. I’ve have already shown Vorke Z3 hardware inside out, so in the second part of the review, I’ll focus on testing the firmware including video playback, and the system performance, and see how it compares to the similar Yundoo Y8, which I reviewed last month. First Boot, Setup, and First Impressions One the selling point of Vorke Z3 is its SATA connector, so I connected a 1TB 3.5″ SATA drive first, as well as Seagate USB 3.0 drive (1TB) to the USB 3.0 port, I also added a USB hub to connect a USB keyboard, […]

July 4, 2017July 4, 2017 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

ROCK64 and UDOO X86 Boards and Accessories are Now Available for Purchase

Pine64 ROCK64 is a development board powered by Rockchip RK3328 quad core processor, while UDOO X86 board is based on Intel Atom x5-E8000 or Celeron N3160 processor plus a Quark SE MCU. What do they have common? Not much, except both boards are now officially available for sale. Just a quick reminder of the specifications for ROCK64 board: SoC – Rockchip RK3328 quad core Cortex A53 processor with ARM Mali-450MP2 GPU System Memory – 1, 2, or 4 GB LPDDR3 Storage – eMMC flash module socket + micro SD card slot + 128 Mbit SPI flash Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz with HDR10 and HLG support, 3.5mm AV port (composite video + stereo audio) Video Codec – 4K VP9, H.265 and H.264, 1080p VC-1, MPEG-1/2/4, VP6/8 Connectivity – Gigabit Ethernet USB – 2x USB 2.0 ports, 1x USB 3.0 port Expansion Headers […]

July 4, 2017July 6, 2017 by Jean-Luc Aufranc (CNXSoft) - 218 Comments

Ebox T8 V Octa-core Android TV Boxes Giveaway

Entertainmentbox.com has contacted me asking whether I’d be interested in hosting a giveaway for two Ebox T8 V TV boxes with S77 Pro air mouse on CNX Software, and I thought it was a good idea, so here we are. EBox T8 V is an Amlogic S912 TV box running Android 6.0 with some pre-installed apps specifically geared towards to UK market like BBC iPlayer, and FilmOn, as well as a 2.5″ SATA bay. It also comes with IPVanish app which I successfully tried to watch UK programs, and I had overall a positive experience with the device as I reported in Ebox T8 V review, with the main problems being the lack of audio license and support for HDMI pass-through. I also know somebody who uses the previous model – Ebox T8 IV – as their main streaming device, and he was pretty happy about it after several months […]

July 3, 2017July 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

How to Install RKMC “Kodi for Rockchip” App in your TV Box

I’ve started playing with Vorke Z3, an Android 6.0 TV box based on Rockchip RK3399 , and saying that Kodi 17.3 – installed from the Google Play Store – is not working so well is an understatement. The other Rockchip TV boxes I’ve recently reviewed with Android 6.0.1 such as Yundoo Y8 and A95X R2 are all using TVMC, a fork of Kodi 16.1 specifically designed for Rockchip devices. However, there’s no source code for that app, but a Rockchip engineer is maintaining his own fork of Kodi, with the code and some binaries libraries released on Github. The project is called RKMC. I did install the app, but I misunderstood part of the instructions at first, and the device would not boot anymore. I lost many hours of work, as I had to reflash the firmware. So I’ll show how I installed it in Vorke Z3 TV box. You […]