camera News - Page 17 of 60 - CNX Software

August 29, 2022September 2, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

SyncBot educational mobile robot supports NVIDIA Xavier NX or Intel Tiger Lake controller

SyncBot educational mobile robot RBX-I2000 controller

Syncbotic Syncbot is a four-wheel autonomous mobile robot (AMR) platform for research and education that can be fitted with an NVIDIA Xavier NX or an Intel Apollo Lake/Tiger Lake-based controller running Ubuntu 20.04 operating system with ROS 2 framework, and comes with an motion control MCU board with an EtherCat master and running Zephyr OS. The robot comes with four 400W TECO servo motors, can handle up to 80kg payloads for sensors and a robotic arm, features 12V and 24V power output for sensors, four USB 3.0 ports, and can also be equipped with an eight-camera kit with Intel RealSense and ToF cameras. Syncbot AMR specifications: Robot Controller Platform (one or the other) SyncBotic A100 evaluation ki (Apollo Lake E3940) SyncBotic SBC-T800 series (Intel Tiger Lake UP3) SyncBotic SBC W series (Intel Tiger Lake UP3, waterproof version) SyncBotic NSync-200 series (NVIDIA NX) Dimensions – 200 x 190 mm STM32-based Motion […]

August 23, 2022November 15, 2022 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

AI, computer vision meet LoRaWAN with SenseCAP K1100 sensor prototype kit

Wio Terminal Grove Vision AI LoRaWAN module

CNXSoft: This is another tutorial using SenseCAP K1100 sensor prototype kit translated from CNX Software Thai. This post shows how computer vision/AI vision can be combined with LoRaWAN using the Arduino-programmable Wio Terminal, a Grove camera module, and LoRa-E5 module connecting to a private LoRaWAN network using open-source tools such as Node-RED and InfluxDB. In the first part of SenseCAP K1100 review/tutorial we connected various sensors to the Wio Terminal board and transmitted the data wirelessly through the LoRa-E5 LoRaWAN module after setting the frequency band for Thailand (AS923). In the second part, we’ll connect the Grove Vision AI module part of the SenseCAP K1100 sensor prototype kit to the Wio Terminal in order to train models to capture faces and display the results from the camera on the computer. and evaluate the results of how accurate the Face detection Model is. Finally, we’ll send the data (e.g. confidence) using […]

August 4, 2022 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

AMD Ryzen Embedded 5000 Series CPUs show up in Micro-ATX motherboard

AMD Ryzen Embedded 5000 Series motherboard

Advantech has announced the AIMB-522 industrial Micro-ATX motherboard with AMD Ryzen Embedded 5000 Series Zen3 processors for AI image processing in automation and surveillance applications. I had never heard about “Ryzen Embedded 5000 Series” processors, but that motherboard comes with a choice of new SKUs such as the 12-core Ryzen 5950E, the 10-core Ryzen 5900E, the 8-core Ryzen 5800E, and the 6-core Ryzen 5600E, as well as existing Ryzen 5000 desktop processors. AIMB-522 Micro-ATX motherboard specifications: Processor (one or the other) Ryzen 5950E 12-core processor @ up to 3.4 GHz with 64MB L3 cache; TDP: 105W Ryzen 5900E 10-core processor @ up to 3.7 GHz with 64MB L3 cache; TDP: 105W Ryzen 5800E 8-core processor @ up to 3.7 GHz with 32MB L3 cache; TDP: 100W Ryzen 5600E 6-core processor @ up to 3.6 GHz with 32MB L3 cache; TDP: 65W Ryzen 5950X 16-core processor @ up to 3.4 GHz […]

June 28, 2022June 28, 2022 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

KEEN Ranger PT 4G LTE camera supports animal and human detection

I’ve tested a few security cameras with human and vehicle detection capabilities, but Reolink has now added animal detection via the KEEN Ranger PT trail camera mostly designed to monitor four-legged animals in the wild. It’s somewhat similar to the Reolink Go Plus 4G camera with solar power support and 4G LTE connectivity, but also offers a 360° view with pan/tilt control, a low-glow IR night vision, a 0.5s fast trigger speed, as well as GPS to track the position of cameras or sightings of animals on the mobile app. KEEN Ranger PT camera key features and specifications: Camera/Video Image Sensor – 1/3″ CMOS Sensor Video Resolution – 2K 4MP high definition (2560 x 1440 @ 15FPS) Video Format – H.265 Lens – f= 2.8mm fixed, F=1.6 Field of View – Horizontal: 95°, vertical: 57°, diagonal: 115° Infrared Night Vision – 12x 940nm no-glow IR LED’s Night Vision Range – […]

June 23, 2022June 23, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

MaaXBoard 8ULP SBC leverages NXP i.MX 8ULP Cortex-A35/M33 SoC for Edge audio and HMI applications

Avnet MaaxBoard 8ULP will be one of the first single board computers (SBC) based on the new NXP i.MX 8ULP Cortex-A35/M33 processor designed for Edge audio and HMI applications, and featuring NXP’s EdgeLock for device-to-cloud security. The board will come with 2GB RAM, 32GB eMMC flash, a MIPI DSI display connector, a MIPI CSI camera connector, Fast Ethernet and WiFi 5 connectivity, a digital microphone, and a 3.5mm stereo audio jack, and provide expansion capabilities via a 40-pin header for Raspberry Pi HATs and a 16-pin Shuttle Click header for MikroE Click add-on boards. MaaXBoard 8ULP SBC specifications: SoC – NXP i.MX 8ULP processor with 2x Arm Cortex-A35 core @ 1.0 GHz, 1x Arm Cortex-M33 real-time core @ 216 MHz, 1x HiFi 4 audio DSP @ 600 MHz, 1x Fusion DSP @ 200 MHz for low-power voice and sensor hub processing, as well as 2D and 3D GPUs and 768 […]

June 22, 2022 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Orbbec Femto ToF camera enables accurate 3D object and scene capture

We’ve written a couple of articles about Time-of-Flight (ToF) technology in recent weeks notably about ranging sensors such as VL53L8 dToF sensor and Toppan hybrid ToF sensor, but Orbbec has used the technology in their Femto camera line designed to capture 3D objects and scenes. The Femto 3D cameras support a depth-of-field (DoF) from 0.2 to 5 meters, multi-camera synchronization, can be used in complete darkness, and are equipped with a 6-Axis IMU tracking sensor for motion tracking. The ToF cameras should find their way into applications for healthcare, warehousing/shipping, autonomous robotics, augmented reality, and other sectors. Three models are available with the following highlights: Femto – 0.2 to 5 meters optical range with a depth resolution of 640 x 480 @ 30fps, and 5.8W power consumption. 99.4 x 68 x 25mm form factor. Femto W – Wide depth field of view (H90, V74) and color field of view (H98.6, […]

June 21, 2022February 10, 2023 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Ingenic T31-based WiFi AI camera development kit promises over a year of battery life

Ingenic T31 AI camera devkit one-year battery life

We’ve previously seen WiFi security cameras promising a year of battery life with products like the Eufy EverCam, but the Ingenic T31-based Smart Video Application Development Kit by Innophase may allow for the development of even more power-efficient WiFi AI security cameras with AI processing last can last over one year. The development kit combines Ingenic T31 MIPS & RISC-V camera SoC with Innophase Talaria TWO INP101x ultra-low-power (57µA @ DTIM10) Wi-Fi & BLE wireless module, that is estimated to last 14.4 months on a 3,000 mAh battery while operating at a 99.3% idle, 0.7% video capture ratio. Development kit content: Board with Ingenic T31 MIPS processor @ 1.5 GHz and RISC-V low-power core, H.265 encoder, 512Mbit or 1Gbit on-chip memory fitted with 2M pixel Full-HD camera @ 30fps USB Debug board Microphone and speaker InnoPhase Talaria TWO SDIO Adapter Board Fitted with INP1014 LGA module with 2.4GHz WiFi 4, […]

June 14, 2022June 18, 2022 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Open-source hardware USB Type-C industrial camera features Lattice Crosslink NX FPGA

Gaurav Singh, acting as Circuit Valley, has designed an open-source hardware USB 3.0 Type-C industrial camera with three boards: one to capture data through a CMOS sensor, another based on a Lattice Crosslink NX FPGA to handle image processing, and finally, a board equipped with an Infineon FX3 USB 3.0 controller for sending the video data to the host. This design allows the DIY camera to be extremely flexible, as for instance, you could keep the FPGA and USB board, and simply change the sensor board for a better/different camera. A 3D printable enclosure is also provided, and the camera supports C-mount lenses, so the lens can also be easily changed as required. Here’s what the final result looks like. Camera specifications: Sensor board Sensor for example Sony IMX290, IMX327, or IMX462 Oscillator FPGA/Host board interface – High-density connector with I2C, 4-lane MIPI with clock, I2C, a few other control […]