debian News - Page 6 of 73 - CNX Software

December 21, 2023 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Cytron IRIV PiControl is an Industry 4.0 controller based on Raspberry Pi CM4 module

IRIV PiControl IR4.0 CM4 Industrial controller

Cytron IRIV PiControl is described as an Industrial Revolution 4.0 (or Industry 4.0) controller that is powered by a Raspberry Pi Compute Module 4 (CM4) and joins the likes of OnLogic Factor 201, Modberry 500 CM4, and Pigeon RB700 among others. The DIN Rail mountable Industry 4.0 controller from Cytron currently ships with a Raspberry CM4 Wireless (2GB/16GB or 4GB/32GB) and offers several isolated interfaces such as DI and DO up to 50V, four analog inputs, and RS232 and RS485 serial interfaces via terminal blocks, IRIV PiControl specifications: SoM – Raspberry Pi CM4 with Broadcom BCM2711 quad-core Arm Cortex-A72 processor @ up to 1.5 GHz, up to 8GB LPDDR4 RAM, up to 32GB eMMC flash Additional storage – M.2 socket for NVMe SSD (See Expansion section) Video Output – HDMI port up to 4Kp60 Networking 1x Gigabit Ethernet port 1x 10/100M Ethernet port WiFi 5 and Bluetooth 5.0 on Raspberry […]

December 21, 2023December 22, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Youyeetoo R1 – A feature-rich Rockchip RK3588S SBC with M.2 sockets, NFC, etc.. for $99 and up

Youteetoo Cyboboard R1, or just Youyeetoo R1 for shorts, is a Rockchip RK3588S SBC that packs quite a lot of features in a 100×69.3mm form factor with two M.2 sockets for NVME/SSD or 4G LTE, and WiFi and Bluetooth connector, support for NFC, four display interfaces, two MIPI CSI camera interfaces and more. The board is offered with up to 32GB RAM and 256GB eMMC flash, and also comes with a gigabit Ethernet port, five USB interfaces, a built-in microphone, several audio inputs/outputs, a 30-pin header for expansion, and it can support HDMI input via an adapter connected to one of the MIPI CSI ports. Youyeetoo R1 specifications: SoC – Rockchip RK3588S CPU – Octa-core processor with 4x Cortex-A76 cores @ up to 2.2-2.4 GHz, 4x Cortex-A55 cores @ up to 1.8 GHz GPU – Arm Mali-G610 GPU with OpenGL ES 3.2, OpenCL 2.2, and Vulkan 1.2 support VPU – […]

December 17, 2023January 2, 2024 by Debashis Das - No Comments

Firefly AIO-3588Q 8K AI Board Features Octa-Core CPU and 6 TOPS NPU

Firefly has recently launched the AIO-3588Q 8K AI board powered by a powerful Rockchip RK3588 SoC, up to 32GB of RAM, 8K video encoding-decoding, Gigabit Ethernet, Wi-Fi 6, 5G/4G, and multiple display support. With all these features this board is designed to target the industrial, commercial, and automotive markets. Previously, we have covered many SBCs and SoMs designed by Firefly such as the similarly named Firefly AIO-3588SG; feel free to check those out if you’re interested. Features and specifications of the AIO-3588Q 8K AI Board: SoC – RockChip RK3588: CPU – Octa-core 64-bit (4x Cortex-A76+4x Cortex-A55), 8nm process, up to 2.4GHz. GPU – ARM Mali-G610 MP4, supports OpenGL ES3.2/OpenCL 2.2/Vulkan1.1, 450 GFLOPS. NPU – Up to 6 TOPS, supports INT4/INT8/INT16, compatible with TensorFlow/MXNet/PyTorch/Caffe. ISP – Integrated 48MP ISP with HDR & 3DNR. VPU – Supports 8K @ 60fps and 4K @ 60fps video decoding/encoding, including H.265/VP9/AVS2, and H.264 AVC/MVC. RAM […]

December 14, 2023December 14, 2023 by Jean-Luc Aufranc (CNXSoft) - 21 Comments

Lichee Console 4A RISC-V mini laptop sells for $252 and up

Sipeed Lichee Console 4A is a RISC-V portable Linux console, that I would also call a RISC-V mini laptop, powered by an Alibaba T-Head TH1520 quad-core C910 processor and equipped with up to 16GB RAM and 128GB eMMC flash. We first covered the device last August, but Sipeed had started taking pre-ordered by the end of October, and they’ve gone through the first batch of mass production, and should soon ship the mini laptops with the Aliexpress store showing December 31 as the release date, and we’re told some samples may have already been shipped in the first part of the month. Lichee Console 4A specifications: SoM – Replaceable Lichee LM4A system-on-module based on TH1520 quad-core RISC-V C910 processor with up to 16GB LPDDR4X, 128GB eMMC flash Storage – MicroSD card slot, M.2 SSD support Display – 7-inch 1280 x 800 LCD with capacitive touch Video Output – 1x mini […]

December 8, 2023May 13, 2024 by Jean-Luc Aufranc (CNXSoft) - 25 Comments

Radxa Zero 3W SBC – Rockchip RK3566 SoC, 8GB RAM, WiFi 6 in Raspberry Pi Zero 2 W form factor

More Raspberry Pi Zero 2 W lookalikes are coming to market, as after the Allwinner H618-based Orange Pi Zero 2W, the Radxa Zero 3W has now been introduced with a 1.6 GHz Rockchip RK3566 processor and up to 8GB RAM, plus WiFi 6 and Bluetooth 5.4 connectivity, which makes it one of the most powerful Arm Linux SBCs in the compact Raspberry Pi Zero form factor. The board also comes with an optional eMMC flash with up to 64GB capacity, a microSD card, a micro HDMI port, two USB Type-C ports, a MIPI CSI camera connector, and of course, the usual 40-pin Raspberry Pi GPIO header. Radxa Zero 3W specifications: SoC – Rockchip RK3566 CPU – Quad-core Arm Cortex-A55 processor @ 1.6 GHz (Note the RK3566 is usually clocked at up to 1.8 GHz but may have been underclocked here due to heat issues at the higher frequency as the […]

December 7, 2023 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Add WiFi connectivity to older USB printers with Orange Pi 3G-IoT-A and UoWPrint print server

I previously used an inexpensive CHIP board as a Linux printer and scanner server for the Canon MP250 USB multi-function printer. It took a while to make it work with a long list of instructions and even then the scanner function was not working very reliably. ValdikSS’s UoWPrint driverless printing and scanning server aims to simplify the process for older USB printers and also supports AirPrint and Mopria standards over WiFi. The older Orange Pi 3G-IoT-A board was the hardware of choice for this project due to its ultra-low price. The resulting product enables users to convert their old USB printer (or MFP) into a WiFi printer/MFP and print and scan without drivers from Windows, macOS, and Linux, as well as mobile operating systems such as iOS/Android. ValdikSS told CNX Software he spent a considerable amount of time backporting patches required to run modern Debian 12 to the kernel 3.2.67 […]

December 5, 2023 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

MeLE Quieter4C ultrathin fanless Intel N100 mini PC supports up to three displays

MeLE has just launched a new model from its Quieter family with the Quieter4C ultrathin fanless mini PC powered by an Intel Processor N100 quad-core Alder Lake-N processor, 8GB to 16GB LPDDR4, and 128GB to 512GB eMMC+SSD storage, and supporting up to three independent 4K displays. Intel N100 mini PCs have become popular due to their excellent price/performance ratio, but although a few are fanless, many are actively cooled, and the Quieter4C differentiates itself by its low profile with the system being just 18.3 mm thick. MeLE Quieter4C specifications: SoC – Intel Processor N100 quad-core Alder Lake-N processor @ up to 3.4 GHz (Turbo) with 6MB cache, 24EU Intel HD graphics @ 750 MHz; TDP: 6W System Memory – 8GB or 16GB LPDDR4X Storage 128GB or 256GB eMMC flash Optional 256GB M.2 SSD (for 512GB storage in total) via M.2 2280 SATA III/PCIe Gen3 x4 socket MicroSD card reader Video […]

December 5, 2023December 4, 2023 by Jean-Luc Aufranc (CNXSoft) - No Comments

Robustel introduces EG5101 and EG5200 Debian 11 industrial IoT gateways with 4G LTE cellular connectivity

Robustel EG5101 EG5200 Debian 11 industrial gateways

Robustel introduced the EG5101 and EG5200 industrial IoT gateways running Debian 11 a few weeks ago, both with 4G LTE cellular connectivity, but the NXP i.MX 6ULL-based EG5101 has a more compact design, while the NXP i.MX 8M Plus-powered EG5200 provides more I/Os and resources. Expanding the earlier EG5100, EG5120, and LG5100 models from the company, the two edge computing gateways target Industry 4.0 and smart infrastructure applications and enable real-time analytics at the edge with lower latency than running workloads in the cloud. Robustel EG5101 and EG5200 SoC/Memory/Storage EG5101 NXP i.MX 6ULL Cortex-A7 32-bit processor @ 792 MHz 512MB to 1024MB DDR3 8GB eMMC flash EG5200 NXP i.MX 8M Plus quad-core Cortex-A53 64-bit processor @ 1.6 GHz with 2.3 TOPS NPU 4GB DDR4 32GB eMMC flash, microSD card socket Connectivity EG5101 1x 10/100 Mbps Ethernet port 4G LTE with 1x SMA-K antenna connector, 2x Mini SIM (2FF) EG5200 5x […]