development board News - Page 136 of 261 - CNX Software

December 28, 2017December 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 42 Comments

Orange Pi One Plus Allwinner H6 Board Launched for $20

Allwinner H6 is a processor designed for 4K HDR set-top boxes such as Zidoo H6 Pro, but with USB 3.0, Gigabit Ethernet, and PCIe interfaces, the processor is also a good candidate for ARM development boards where you need fast I/Os. I was expecting Orange Pi 3 Plus as the first board based on the processor, but instead Shenzhen Xunlong has just launched a cheaper Orange Pi One Plus version that sells for $19.99 plus shipping. Orange Pi One Plus specifications: SoC – Allwinner H6 V200 quad core Cortex A53 processor with Arm Mali-T720MP2 GPU System Memory – 1 GB LPDDR3 Storage – micro SD card slot up to 32GB Video & Audio Output – HDMI 2.0a up to 4K @ 60 Hz with HDR, HDCP, CEC Connectivity – Gigabit Ethernet (via Realtek RTL8211 transceiver) USB – 1x USB 2.0 host port, 1x micro USB OTG port Expansion – 26-pin […]

December 22, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Renesas R-Car M3 Starter Kit is Designed for ADAS Applications

Most boards targeting the automotive market are impossible to purchase by individual, so last year I was pleasantly surprised when I discovered Renesas R-Car M2 Porter Linux automotive infotainment development board was available for sale on Digikey, and had good documentation on eLinux.org. The company has now introduced another automotive board, namely R-Car V3M starter kit, that’s not designed for infotainment, but instead for ADAS (Advanced Driver Assistance Systems) or even AD (Automated Driving) applications. Specifically, the board is supposed to “accelerate the development of New Car Assessment program (NCAP), front camera applications, surround view systems, and lidars” leveraging the company’s R-Car V3M image recognition SoC. Renesas R-Car V3M starter kit (V3MSK) specifications: SoC – Renesas R-Car V3M processor with two Cortex A53 64-bit cores @ up to 800 MHz, a dual lockstep Cortex-R7 32-bit core @ up to 800 MHz, IMP-X5-V3M image recognition engine System Memory – 448KB RAM on-chip; […]

December 20, 2017July 21, 2023 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

SolidRun MACCHIATObin Single Shot Networking Board Launched for $269 and Up

Earlier this month, I listed SoliRun MACCHIATObin networking board as one of the top 5 most powerful ARM boards in 2017/2018, thanks to its fast quad core Cortex A72 processor, support for up to 16GB RAM, three SATA interfaces, and network connectivity options with several Ethernet copper/SFP interfaces up to 10 Gbps. The problem with powerful boards is that they can be expensive, and the original MACCHIATOBin (Double Shot) board sells for $369 and up. The good news is that SolidRun has just launched a cheaper version called MAACHIATOBin Single Shot with a quad core Cortex A72 processor limited to 1.6 GHz (instead of 2.0 GHz), and the two 10 Gbps interface are only accessibly through SFP cages, and not Ethernet copper (RJ45) ports anymore. MACCHIATOBin Single Shot is based on the same PCB as the original version of the board, and the rest of the specifications are just the […]

December 18, 2017November 15, 2020 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

How to Use Khadas VIM2 Board with VTV Expansion DTV Board as a Live TV Streaming Server

Khadas VIM2 is the first and only Amlogic S912 based hobbyist development board on the market, which makes it interesting by itself, but the company also added some interesting features such as an SPI flash for network boot, Wake-on-LAN support, and more. Last month the company sent me a sample of the Khadas VIM2 Basic (2GB RAM/16GB flash) together with VTV Extension DTV Board featuring a DVB-T2/C and DVB-S2 tuner. I’ve already checkout the hardware and shown how to assemble the kit, so for the second part of the review it seemed like a good idea to use the board as a Live TV streaming server broadcasting satellite, cable or terrestrial TV to devices connected to the local network. At first I wanted to use Linux operating system, because I could have run other Linux server services, but SuperDVB, the company that makes and supports the tuner board, only have […]

December 18, 2017 by TLS - 7 Comments

QNAP QBoat Sunny Review – Part 1: Unboxing, Closer Look, and Initial Setup

We spotted the QBoat Sunny at QNAP’s booth back at CES in January and much has changed since then. Not only did QNAP change from an Intel based solution to an ARM based one, but the product seems to have shifted from being a development board to a strange kind of IoT server. The QBoat Sunny sample that QNAP provided for us to look at is based on the Annapurna Labs AL-314 quad core ARM Cortex-A15 SoC which is clocked at 1.7GHz. This has been paired with 2GB of DDR3L RAM (non-expandable) and 512MB of NAND flash that isn’t user accessible, much as on their NAS products. This simply contains the core parts of the QTS Lite OS. As such, you need to install an M.2 SATA SSD to be able to get started with the QBoat Sunny. QNAP provides a list of compatible SSDs on its website, although some […]

December 16, 2017December 16, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

Arduino & Grove Compatible StitchKit Mixes Fashion & Technology (Crowdfunding)

I don’t really get fashion. For example, I don’t understand why somebody would spend $100 on a pair of “Jean-Patrick Coultier” trousers, while you could get pretty much the same for about $20. My clothes just need to keep me warm and comfortable. And now I can see people starting to attach blinking lights to their clothes. Heresy!!! But others have a different opinions, and people interested in fashion, may not be interested in electronics, but still want those shiny things on their clothes. StitchKit is an Arduino compatible board that can also take Seeed Studio Grove module designed for those kids, teachers, designers, and cosplayers who want to easily add LEDs and other electronics to clothes or other wearable pieces without having to dig into the technical details. The system works around MakeFashion board powered by an Arduino compatible Microchip / Atmel ATMega32U4 AVR micro-controller with two rows of […]

December 13, 2017December 13, 2017 by Jean-Luc Aufranc (CNXSoft) - 32 Comments

NanoPi NEO Core and NEO Core2 Allwinner H3/H5 Systems-on-Module Launched for $7.99 and Up

FriendlyELEC has launched many cool NanoPi development boards such as NanoPi NEO2, NanoPi A64, or more recently NanoPi Duo based on Allwinner H- or A- series ARM processors, as well as some models based on Samsung/Nexcell or Amlogic SoC. The company has now launched two other NanoPi products that are a bit different since they are systems-on-module – or could even be considered minimal development boards – with namely NanoPi NEO Core powered by Allwinner H3 quad core 32-bit processor, and NanoPi NEO Core2 based on Allwinner H5 quad core 64-but processor. NanoPi NEO Core Specifications: SoC – Allwinner H3 quad core ARM Cortex-A7 processor up to 1.2GHz with Mali-400MP GPU System Memory – 256MB or 512MB DDR3 RAM Storage – NC/8GB/16GB/32GB eMMC flash, micro SD slot USB – 1x micro USB OTG port also used for power input Expansion – 2x 2.54mm pitch 24-pin headers, 1x 2.54mm pitch 20-pin […]

December 13, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Geniatech & Arrow Are Working on Tablet Docks for 96Boards Development Boards

Geniatech has been working on some interesting tablet docks specifically designed for 96boards compliant hardware platform. They showcased a prototype at Linaro Connect US 2017 with their “almost-96Boards-compliant” Developer Board IV based on Snapdragon 410E which adds an Ethernet port to 96Boards CE specifications.The model showcased comes with a 10.1″ FullHD touchscreen display, and should work with all 96Boards CE edition boards once launched. JinJun Fang, CEO of Geniatech, also mentioned they are discussing with Arrow Electronics, which will manage distributions, about other 7″ and 13″ models. The video – by Charbax – embedded below was filmed in September 2017, but AFAIK the 96Boards tablet docks have not launched yet, and Geniatech did not reply to request for information, so we’ll have to wait a little longer before launch. Mr Fang also mentioned a new Snapdragon 820 based board coming later-on, maybe Developer Board V? Via ARMdevices Jean-Luc Aufranc (CNXSoft)Jean-Luc […]