development board News - Page 146 of 261 - CNX Software

September 19, 2017September 19, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

uCAN CAN Ethernet Converter and Logger is Based on Orange Pi Zero Board

The CAN bus is a serial communication protocol used in automotive and automation applications. The guys at ucandevices.pl have designed a solution around Orange Pi Zero board that allows you to log CAN bus data or act as a bridge between the CAN bus and Ethernet or WiFi. They call it “CAN Ethernet converter, CAN Logger, Linux CAN computer”. Sorry, no shorter name that I could find… uCAN (pronounced micro CAN) CAN Bus board specifications: Main Board – Orange Pi Zero with Allwinner H2+ quad core cortex-A7 processor, 256 MB RAM Network Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi Can Bus – 2-pin terminal block; support for CAN version 2.0 support Power Supply – DC 5V/2A via micro USB port Dimension – 50 x 50 x 20 mm The device comes pre-load with Debian distribution provided by Armbian plus various CAN tools. The getting started video below shows uCANTools web […]

September 18, 2017September 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

LimeSDR Mini is a $135 Open Source Hardware, Full Duplex USB SDR Board (Crowdfunding)

LimeSDR open source hardware software defined radio was launched last year with the promise of integration with Ubuntu Snap Store allowing to easily download and install various radio implementations such as LTE, WiFi, Bluetooth, LoRa, etc… It was offered for $200 and up as part of a crowdfunding campaign, but Lime Microsystems is back on CrowdSupply with a cheaper and low end version aptly called LimeSDR Mini.LimeSDR mini specifications: FPGA – Intel Altera Max 10 (10M16SAU169C8G) with 16K Logic gates, 549 KB M9K memory, 2,368 KB user flash memory Storage – 4 MB flash memory for data; 2x128KB EEPROM for RF transceiver MCU firmware and data RF Lime Microsystems LMS7002M RF transceiver Tx & Rx SMA connectors Frequency range – 10 MHz to 3.5 GHz RF bandwidth – 30.72 Mhz Sample Rate – 30.72 MSps with 12-bit sample depth Power Output (CW): up to 10 dBm USB – 1x USB […]

September 18, 2017September 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Need to Program Many ESP-WROOM-32 / ESP-32S Modules? This Board Should Help

We’ve just published an article about a 3D printed jig to program some ESP8266 light bulbs, but as I watched Andreas Spiess’s latest video about ESP32 boards, he showed a board specifically designed to flash firmware to ESP-WROOM-32 or/and ESP-32S modules, which could be useful if you have many to program. The acrylic base does not appear to be offered by all vendors, as some use some standoffs instead to lift the board up. You just need to insert your compatible ESP32 module in the board, flash the firmware it, take it out, and more to the next module. It can also be used as a development board since it exposes I/Os via three 14-pin headers, comes with a on/off button, reset and program buttons, as well as a micro USB port for power, programming and debugging I first found it on Banggood, where it is sold for $14.99 shipped, […]

September 15, 2017September 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

7″ LCD Display with HDMI input, Audio output Launched for Orange Pi (and Other) Boards

If you want a cheap and simple way to add a screen to your development board, there are some 7″ displays with HDMI inputs that costs under $30 shipped. But Shenzhen Xunlong has decided to make their own 7″ LCD display with HDMI input and audio output, and sell for $22 + shipping. The company only provided minimal technical information about the board and display: Display – 7″ TFT LCD with 1024×600 resolution Video & Audio Input – HDMI Audio Output – 3.5mm audio jack Power Supply – 5V via micro USB port If we look at a closer picture of the board, we’ll see they used Lontium LT8619B, but the company’s website is down… The board also features three different connectors for displays, so they probably have other displays planned. While the company claims the display is made for Orange Pi H3 boards, it should really work with any […]

September 14, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Wemos LOLIN32 Lite Board Powered by ESP32 Rev 1 Chip Sells for $4.90

Wemos introduced the first low cost ESP32 board with LOLIN32 board going for $6.90 plus shipping in April, but the company is now back with a new Lite version of the board switching ESP-WROOM-32 module with their own design around ESP32 Rev 1 chip (with various silicon bug fixes), and a lower $4.90 price tag to which you need to add ~$2 for shipping. Wemos LOLIN32 Lite is also smaller, so we’ll lose some of the pins (mostly extra power pins), but the I/Os look the same: SoC – Espressif ESP32-DOWD6Q Rev 1.0 dual core Tensilica Xtensa LX6 processor with WiFi and BLE Connectivity – 802.11 b/g/n WiFi + Bluetooth LE I/Os via 2x 13-pin headers with digital I/Os, analog inputs, UART, I2C, SPI, VP/VN, DAC… 3.3V I/O voltage Breadboard compatible USB – 1x micro USB port for power and programming/debugging Misc – Reset button Power – 5V via micro […]

September 11, 2017March 23, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Getting Started with Espruino & JavaScript on ESP32 with ESPino32 Board

Venus Supply Co., Ltd, better known as ThaiEasyElec, is a company based in Thailand, selling embedded systems and development board, as well as providing development services based in Thailand. The company sent me their latest board called ESPino32 powered by Espressif ESP-WROOM-32 WiFi and Bluetooth module for evaluation. While the board is supported in Arduino-esp32, I’ve already tested Arduino with ESP32-Bit module & ESP32-T board, so after checking out the hardware, I’ll load it with something different: Espruino, a firmware allowing for JavaScript programming over the serial console, or a Web based IDE. ESPino32 Unboxing and Soldering The board shipped with four female headers, and I/O stickers. The board includes ESP-WROOM-32, exposes I/Os through four 10-pin headers, features CP2104 chip for serial to USB debugging via micro USB port, two buttons (reset and program), a user LED connected to IO16, and a jumper to select between regulated power supply (micro […]

September 9, 2017September 9, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Amlogic A111, A112 & A113 Processors are Designed for Audio Applications, Smart Speakers

Amlogic processors are mostly found in TVs and TV boxes, but the company is now apparently entering a new market with A111, A112, and A113 audio processors. I was first made aware of those new processors through Buildroot OpenLinux Release Notes V20170831.pdf document posted on their Open Linux website, where two boards with Amlogic A113D and A113X are shown. First, S400 board with the following key features/specifications: SoC – Amlogic A113D CPU System Memory – 1GB DDR3 Storage – 512MB SLC NAND flash Display I/F – MIPI interface Connectivity – Gigabit Ethernet SDIO WiFi/BT (AP6356S) Audio SPDIF_IN/SPDIF_OUT LINE_IN/LINE_OUT 2x Audio headers (MIC_Connector & SPK_Connector) USB – 1x USB 2.0 OTG Expansion – 2x PCIe ports Misc – 6x ADC Keys, IR_IN/IR_OUT, UART Interface (RS232) The second S420 board is based on A113X SoC, and comes with less features (no display, no Ethernet, no PCIe…), less memory: SoC – Amlogic A113X […]

September 8, 2017September 8, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Geekcreit ESP32 Development Board Goes for $4 Shipped (Promo)

While you may have thought Wemos Lolin32 board selling for $6.9 plus shipping was already a decent deal, you can now buy a breadboard friendly ESP32 development board for the normal price of ES8266 board thanks to a promotion on Banggood selling 1,000 pieces of “Geekcreit ESP32” board for $4.09 including shipping, and valid until September 10, or while stock lasts. It looks to be roughly the same design as the fake NodeMCU ESP-32s board I once spotted: Wireless Module – ESP-WROOM-32 with Espressif ESP32 dual core processor with 802.11 b/g/n WiFi and Bluetooth 4.0 LE Expansion – 2x 19 pin headers with GPIOs, Analog inputs (ADC), UART, I2C, VP/VN, etc…; breadboard compatible USB – 1x micro USB port for power and programming Misc – BOOT and EN buttons, red (power) and blue (GPIO2) LEDs Power Supply – 5V via USB or Vin pin Dimensions – 51.4 x 28.3 mm […]