development board News - Page 163 of 260 - CNX Software

March 26, 2017September 5, 2019 by Jean-Luc Aufranc (CNXSoft) - 28 Comments

NanoPi NEO2 Board, NanoHats, and BakeBit Starter Kit Review – Part 1: Hardware Overview & Assembly

NanoPi NEO 2 development board is an update of NanoPi NEO with a quad core 64-bit Allwinner H5 processor + 512 MB RAM, Gigabit Ethernet, and an extra audio header, which can be a great little board for headless application since there’s no video output. FriendlyELEC ask me whether I wanted to review to board with some of their NanoHATs add-on boards, and while I asked for NanoHat PCM5102A audio board and NEO Hub which I intended to use with Grove modules from my Wio Link Started Kit, I get a bit more than expected, as the company included sets of NEO 2 boards and accessories, NanoHATs, two serial debug board, and their BakeBit Starter Kit with several Grove modules to play with. Since I have so many things to look at in this first post, I’ll just describe the hardware, assemble it, quickly check the paper documentation, and give […]

March 24, 2017March 24, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

CubieBoard6 Development Board Powered by Actions Semi S500 Processor Comes with SATA, LiPo Battery Support

CubieTech launched Cubieboard with Allwinner A10 processor in 2012, and while they may not be as popular as some other boards like Raspberry Pi, ODROID, or Orange Pi boards in 2017, the company is still around after around 5 years, and their latest board is Cubieboard6 powered by Action Semi S500 quad core Cortex A9 processor with 2GB RAM, 8GB flash, HDMI, wired & wireless connectivity, SATA, battery support and more. Cubieboard6 specifications: SoC – Actions Semi S500 quad core ARM Cortex-A9 processor with Imagination PowerVR SGX544 GPU System Memory – 2GB LPDDR3 Storage 8GB eMMC flash SATA 3.0 port for 2.5″ HDD/SSD up to 4TB micro SD card slot up to 32GB Video Output – HDMI 1.4b up to 1080p60 Audio I/O – Via HDMI output, 3.5mm audio output (HP) jack, 3.5mm audio input (MIC) jack Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi, Bluetooth 4.0 LE (AP6212) with u.FL […]

March 22, 2017March 22, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Khadas Vim Amlogic S905X Development Board Gets Android 7.1 Firmware and SDK

Khadas Vim is a development board powered by Amlogic S905X quad core processor that officially supports Ubuntu 16.04, OpenELEC and Android 6.0. Shenzhen Wesion Technology , the maker of the board, has now released Android 7.1 firmware image and SDK for the board. As we’ve seen before Amlogic Android 7.1 SDK still relies on Linux 3.14.29, but Linux 4.4 is also in the works. If you want to give it a try on your board, download Vim_Nougat_170321.7z directly, or from the firmware download page. The current image installs to the eMMC flash via USB or a bootable micro SD card (Windows methods only), so it will wipe whatever OS you have already on the board. The firmware is based on the features of their Android 6.0.1 image, but upgraded to Android 7.1.1 with Chrome and Gapps (for Google Play Store support). Source code for the Android 7.1 SDK can be […]

March 21, 2017March 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

AAEON RICO-3288 Pico-ITX Board is Powered by Rockchip RK3288 Processor

When Rockchip RK3288 was launched in 2014 we got a few development boards like Firefly-RK3288, PopMetal, and Radxa Rock 2, and later on MiQi board. ASUS Tinker board made the processor popular again in 2017, and now AAEON, an industrial embedded company of ASUS group, has just unveiled RICO-3288 Pico-ITX Board based on the processor, and targeting OEMs instead of hobbyists & makers. RICO-3288 board specifications with RICO-3288F & RICO-3288V models adding wireless connectivity & battery options, as well as CAN and an extra RS-232 port for for the latter: SoC – Rockchip RK3288 quad core Cortex A17 processor @ 1.8GHz with ARM Mali-T760 GPU System Memory – 2GB DDR3L RAM Storage – 16GB eMMC flash, micro SD slot up to 64GB Video Output / Display IF mini HDMI 2.0 up to 4Kx2K @ 60Hz (Note that 4K @ 60 Hz may not work with all HDMI 2.0 TVs). eDP […]

March 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

UP Core is a Low Cost & Compact Intel Maker Board Powered by an Atom x5-Z8350 SoC (Crowdfunding)

The UP community has already launched Intel Cherry Trail and Apollo Lake boards in the past with UP Board and UP2 (squared) boards, and they are now about to launch a cheaper and smaller board called UP Core powered by Intel Atom x5-Z8350 processor with to 1 to 4GB memory, up to 64GB eMMC flash, HDMI, USB 3.0, … and I/O expansion connectors. UP Core specifications: SoC – Intel Atom x5-Z8350 “Cherry Trail” quad core processor @ 1.44 GHz / 1.92 GHz (Burst frequency) with Intel HD 400 graphics @ 200 / 500 MHz System Memory – 1, 2 or 4 GB DDR3L-1600 (soldered on board) Storage – 16, 32, or 64 GB eMMC flash, SPI flash ROM Video Output / Display – HDMI 1.4 port, full eDP (embedded DisplayPort) connector Audio I/O – Via HDMI, and I2S Connectivity – 802.11 b/g/n WiFi @ 2.4 GHz, Bluetooth 4.0 LE (AP614A) […]

March 17, 2017March 18, 2017 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

$18.9 Orange Pi Zero Plus 2 Board: Allwinner H3, WiFi + Bluetooth LE, HDMI and 8GB eMMC Flash

When will they ever stop? Shenzhen Xunlong has launched yet another Allwinner H3 board called Orange Pi Zero Plus 2, that has not that much in common with Orange Pi Zero, since it uses a different processor (H3 vs H2+), adds HDMI, and implements WiFi and BLE via an Ampak AP6212 module.Orange Pi Zero Plus 2: SoC – Allwinner H3 quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU @ 600 MHz System Memory – 512 MB DDR3 SDRAM Storage – 8GB eMMC flash + micro SD card slot Video Output – HDMI port with CEC support Connectivity – 802.11 b/g/n WiFi + Bluetooth 4.0 LE (Ampak AP6212) with u.FL antenna connector and external antenna USB – 1x micro USB OTG port Camera – MIPI CSI port Expansion headers – Unpopulated 26-pin “Raspberry Pi B+” header + 13-pin header with headphone, 2x USB 2.0, TV out, microphone and […]

March 17, 2017March 17, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Shenzhen Xunlong Software & Canonical Launch Orange Pi App Store for Ubuntu Snaps

The maker of Orange Pi boards, Shenzhen Xunlong Software, has partnered with Canonical to launch Orange Pi app store, allowing developers to gain a simple mechanism to share their applications, projects and scripts with the Orange Pi community. The store relies on snaps instead of deb packages, with snaps allowing a secure distributions of apps bundled with all their dependencies, which according to Canonical can decreased the time for an half an hour installation process to just a few seconds. The community has already contributed hundreds of snaps in the Ubuntu snap store, including openHAB for home automation, Rocket.chat self-hosted chat platform, NextCloud for cloud storage, and wifi-ap for networking. You can get them from the App store, but installing a snap from the command line is easy, for example:

sudo snap install rocketchat-server

1	sudo snap install rocketchat-server

However, I cannot find any Ubuntu Core image for Orange Pi Boards yet on Ubuntu Core Getting Started page. […]

March 16, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYiR Tech MYC-JA5D2X System-on-Module is Powered by Microchip ATSAMA5D2 Cortex A5 Processor

MYIR Tech has released MYC-JA5D2X system-on-module powered by a Microchip Atmel SAMA5D2 ARM Cortex A5 processor with 256MB flash, and 256 MB DDR3. The module relies on a SO-DIMM edge connector to expose the camera interface, Ethernet, USB, camera, and other I/O signals. MYC-JA5D2X CPU module specifications: SoC – Atmel SAMA5D26 or SAMA5D27 ARM Cortex A5 processor @ up to 500 MHz with 128KB L2 cache System Memory – 256MB DDR3 SDRAM Storage – 256MB NAND flash, 4MB data flash, 64KB EEPROM Connectivity – On-board 10/100M Ethernet PHY 200-pin SO-DIMM edge connector with: 1x Ethernet 1x USB Host, 1x USB Device, 1x USB HSIC (HSIC is only for SAMA5D27) Up to 10x serial ports, up to 2 x CAN (only for SAMA5D27) Up to 7 x I2C, up to 7 x SPI Up to 2 x QSPI 12 x 12-bit ADC (enhanced resolution up to 14 bits) 4x PWM 1x […]