development board News - Page 199 of 260 - CNX Software

January 28, 2016January 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

BeagleBone Black Industrial 4G is Red, and Offers an Extended Temperature Range

BeagleBone Black is a great little board for hobbyists with plenty of I/Os, and decent software support, but the development board has not been designed to be used in low or high temperatures as found in some industrial settings, so Element14 has designed BeagleBone Black Industrial 4G with the same specifications as BeagleBone Black Rev C, but a red PCB, support for an extended temperature range between -20 and +85°C, and additional board protection with a conformal coating. BeagleBone Black Industrial 4G Specifications: SoC – Texas Instruments Sitara AM3358BZCZA10 Cortex A8 @ 1 GHz + PowerVR SGX530 GPU System Memory – 512 MB DDR3L @ 800 MHz Storage – 4GB eMMC + micro SD slot Video Out/Display I/F – HDMI and LCD interfaces Connectivity – 10/100M Ethernet (RJ45) Serial Port – UART0 access via 6 pin 3.3V TTL Header. Header is populated USB – USB 2.0 Client port: Access to […]

January 27, 2016January 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Orange Pi One Quad Core ARM Linux Development Board Launched for $9.99

Orange Pi One board was unveiled at the end of last year as a cheaper alternative to Orange Pi PC with Allwinner H3 quad core processor, 512 MB RAM, an Ethernet Port and HDMI output. I’ve already compared it to C.H.I.P and Raspberry Pi Zero, and found that it was both much more powerful and cheaper to use as an Internet connected board with HDMI output than the two more well-known competitors. The good news is that Orange Pi One is now selling for $9.99 + shipping on Aliexpress, which in my case would be $13.38 in total. Orange Pi One technical specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 512 MB DDR3 Storage – micro SD card slot Video & Audio Output – HDMI with CEC support Connectivity – 10/100M Ethernet USB -1x […]

January 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

NanoPi 2 Fire Board Adds Gigabit Ethernet and Power Management, Drops WiFi and Bluetooth

NanoPi 2 board, based on Samsung S5P4418 quad core Cortex A9 processor with WiFi and Bluetooth, has now gotten a brother, called Nano Pi 2 Fire, with wireless connectivity replaced by Gigabit Ethernet, and a power management IC (PMIC) for software power-off, sleep and wakeup. NanoPi 2 Fire specifications: SoC – Samsung S5P4418 quad core Cortex A9 processor @ up to 1.4GHz System Memory – 1GB 32bit DDR3 Storage – 1x Micro SD Slot Connectivity – Gigabit Ethernet port Video Output / Display I/F- 1x HDMI 1.4a, 0.5 mm pitch SMT FPC seat for full-color LCD (RGB: 8-8-8) Camera – 24-pin DVP interface; 0.5mm pitch USB – 1x USB Host port; 1x micro USB 2.0 OTG port for power and data Expansions Headers – 40-pin Raspberry Pi compatible header with UART, I2C, SPI, GPIOs… Debugging – 4-pin header for serial console Misc – User and reset buttons, power and user […]

January 19, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Renesas GR-PEACH mbed Board Features RZ/A1H Processor with 10MB On-chip Memory

Renesas RZ/A1 ARM Cortex A9 processors were unveiled in 2013, and one of the differentiating feature was the large amount of on-chip SRAM with up to 10MB for RZ/A1H model. The following year, Renesas’ RZ/A1 professional development kit, and some RZ/A1H modules were launched, and I’ve now just seen a tweet about Renesas GR-PEACH development board that is mbed compatible, feature Renesas RZ/A1H processor, and happens to be pink. There are actually two models based on the same PCB: GR-PEACH normal without header, and a “WiFi” connector, and GR-PEACH Full with female headers and an Ethernet port. Both basically share the same specifications: SoC – Renesas RZ/A1H ARM Cortex-A9 Core @ 400 MHz with 10MB on-chip RAM, NEON and FPU, and 128KB L2 cache Storage – 8MB FLASH + micro SD slot Connectivity – Normal: Optional BP3595 WiFi module; FULL: 1x 10/100M Ethernet(Microchip LAN8710A); Both: Xbee connector (unpopulated) USB – […]

January 16, 2016January 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

PixiePro Board Combines NXP i.MX6Q Processor with WiFi 802.11ac, Bluetooth 4.2, NFC, GPS, and a 3G Modem

Saying that the market now provides a wide range of development boards is probably an understatement, but Code Ing has found out that most hobbyist boards had limited on-board wireless connectivity with WiFi and Bluetooth basically the best you could expect, with any extra wireless functionality requiring USB dongles. So the company designed PixiePro single board computer powered by NXP i.MX6Q quad core Cortex A9 processor with on-board wireless connectivity including WiFi 802.11ac, Bluetooth 4.2, GPS/GLONASS, NFC and a 3G module. PixiePro board specifications: SoC – NXP i.MX6Q quad core Cortex A9 processor @ 1 GHz with Vivante 2D and 3D GPUs System Memory – 2GB 64-bit DDR3 Storage – 2x UHS-I micro SD card slot up to 104 MB/s Video Output – micro HDMI up to 1080p60 Audio Output – HDMI and 3.5mm mini TOSLINK optical port/Line Out Connectivity WiFi 802.11 a/b/g/n/ac 2×2 MIMO with two antenna connectors Bluetooth […]

January 14, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Renesas R-Car M2 Porter is a Linux Development Board for Your Car

So far, I always assumed development boards specifically designed for automotive applications would only be available to companies in the car or truck business, but as I wrote about FOSDEM 2016 schedule yesterday, I found out that one of the talk with cover FOSS software stacks that are available for automotive, and usable on hobbyist boards such as Raspberry Pi 2 and Minnowboard Max, but also on Renesas R-Car M2 Porter board specifically designed for automotive infotainment applications. Renesas Port board specifications: SoC – Renesas R-Car M2 dual core ARM Cortex-A15 processor @ 1.5GHz with PowerVR SGX544MP2 GPU, Renesas 2D graphics processor, and Multimedia Engine SH4A @ 780 MHz System Memory – Dual channel 2GB DDR3 Storage – On-board 4 MB SPI, and 64 MB SPI, 1x SATA rev 3.1 connector, 1x SD card slot, and 1x micro SD card slot Video Output / Display I/F – HDMI and LVDS […]

January 11, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Texas Instruments MSP432 LaunchPad Development Board Sells for $4.32 (Promo)

Texas Instruments has started the year by offering a deal on their 32-bit MSP432 LaunchPad Development Kit, dropping the cost from $12.99 to $4.32 for a limited time with coupon code 432@432. MSP432 Launchpad’s key features: MCU – Texas Instruments MSP432P401R ARM Cortex M4F MCU @ 48 MHz with FPU and DSP, 256KB flash, 64KB RAM Expansion – 40 pin BoosterPack Connector, and support for 20-pin BoosterPacks Misc – 2 buttons and 2 LEDs for user interaction Debugging – Back-channel UART via USB to PC, Onboard XDS-110ET emulator featuring EnergyTrace+ Technology Power – Micro USB connector The kit includes the board, micro USB cable and a quick start guide. There’s plenty of technical documentation for the board, although for some unknown reasons, I can’t download any PDF documents from TI website tonight. The coupon is still working, but free shipping on TI eStore seems to be a thing of the […]

January 10, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

MYiR Tech Introduces Atmel SAMA5D4 CPU Module and Development Board

MYiR Tech has launched a new development board – MYD-JA5D4X – featuring their Atmel SAMA5D4 Cortex A5 system-on-module called MYC-JAD5D4X with 512MB DDR2, 512MB Flash, and various ports such as Fast Ethernet, RS485, LCD panel interface, USB connectors and so on. Target applications include control panel/HMI, fitness equipment, smart grid infrastructure, communications gateways, and imaging terminals among others. Let’s start wit the MYC-JAD5D4X CPU module specifications: SoC – Atmel SAMA5D42 or SAMA5D44 ARM Cortex-A5 processor @ up to 600MHz (945DMIPS) with NEON and FPU, 720p hardware video decoder (SAMA5D44 only) System Memory– 512MB (2x 256MB) DDR2 SDRAM Storage – 512MB NAND Flash, 4MB Data Flash, 64KB EEPROM Connectivity – On-board Ethernet PHY I/Os via 200-pin SO-DIMM edge connector 2 x Ethernet 3 x USB2.0 Host 8 x Serial ports 4 x TWI, 3 x SPI 5 x 12-bit ADC 1 x SMD 4 x 4-bit SDIO 1 x LCD 1 x ISI 7 […]