development board News - Page 200 of 261 - CNX Software

February 4, 2016February 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Olimex H3-OLinuXino-NANO is a Smaller Allwinner H3 Board with HDMI, Ethernet, and Many I/Os

Allwinner H3 processor is quite popular in development boards thanks to some of Shenzhen Xunlong’s Orange Pi boards such as Orange Pi PC or Orange Pi One. However, some specific features may not work 0ut of the box, or are undocumented, so it’s always a plus when more companies create boards for a platform, and that’s exactly what Olimex has done with H3-OlinuXino-NANO, a board that’s smaller than any Orange Pi boards, the first open source hardware Allwinner H3 board on the market, and featuring many more I/O pins available. Olimex H3-OlinuXino-NANO specifications: SoC – Allwinner H3 quad core Cortex-A7 processor @ 1.2 GHz with Mali-400MP2 GPU System Memory – 512MB of DDR3 RAM Storage – micro SD card slot Video Output- HDMI up to 1080p60 Connectivity – 10/100M Ethernet USB – 2x USB host ports + 1x micro USB OTG port Expansion – Optional 2x 40-pin headers with GPIOs, […]

February 3, 2016February 3, 2016 by Jean-Luc Aufranc (CNXSoft) - 57 Comments

Hardkernel ODROID-C2 64-Bit ARM Development Board to Sell for $40 Next Month

We previously knew ODROID-C2 was in development thanks to a document and source code from Amlogic themselves. We did not have the full details at the time, and Amlogic’s document even got the RAM capacity wrong. Hardkernel has finally announced ODROID-C2 development board based on Amlogic S905 will be selling on March 2016 for $40, and released specifications and some photos. ODROID-C2 specifications: SoC – Amlogic S905 quad core cortex-A53 processor with 3+2 cores Mali-450 GPU System Memory – 2GB DDR3 SDRAM Storage – eMMC module socket with 8, 16, 32, or 64GB module by Toshiba or Sandisk + micro SD slot supporting UHS-1 SD cards. Video Output – HDMI 2.0 Connectivity – Gigabit Ethernet (Realtek RTL8211F) USB – 4x USB 2.0 host ports + micro USB OTG port Expansion Header 40-pin header with GPIO, I2C, UART, and ADC ; All I/Os are 3.3V, except ADC that is limited to […]

January 29, 2016January 29, 2016 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Intrinsyc Open-Q 600 Single Board Computer is Powered by Qualcomm Snapdragon 600 Processor

Intrinsyc has released several Qualcomm Snapdragon development kits and system-on-modules over the last few years, and the company has now unveiled their first single board computer with Open-Q 600 SBC powered by Snapdragon 600 quad core processor with 2GB RAM and 16GB eMMC flash. Open-Q 600 specifications: SoC – Qualcomm Snapdragon 600 (APQ8064) quad core Krait 300 processor @ 1.7GHz with 2MB L2 cache, Adreno 320 GPU, and Hexagon QDSP6V4 DSP System Memory – 2GB PCDDR3 RAM @ 533MHz; dual channel 32-bit Storage – 16GB eMMC 4.5 flash, micro SD card slot Video Output / Display I/F – HDMI 1.4a port for up to 1080p @ 60Hz, 2-lane MIPI-DSI connector Audio – HDMI, 3.5mm stereo headset output with mono input, 3.5mm Mic line in; Qualcomm WCD9311 audio codec Camera – 2-lane MIPI-CSI connector supporting 8 MP camera up to WXGA resolution @ 60 fps Connectivity Gigabit Ethernet (RJ45) via Qualcomm […]

January 28, 2016January 28, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

BeagleBone Black Industrial 4G is Red, and Offers an Extended Temperature Range

BeagleBone Black is a great little board for hobbyists with plenty of I/Os, and decent software support, but the development board has not been designed to be used in low or high temperatures as found in some industrial settings, so Element14 has designed BeagleBone Black Industrial 4G with the same specifications as BeagleBone Black Rev C, but a red PCB, support for an extended temperature range between -20 and +85°C, and additional board protection with a conformal coating. BeagleBone Black Industrial 4G Specifications: SoC – Texas Instruments Sitara AM3358BZCZA10 Cortex A8 @ 1 GHz + PowerVR SGX530 GPU System Memory – 512 MB DDR3L @ 800 MHz Storage – 4GB eMMC + micro SD slot Video Out/Display I/F – HDMI and LCD interfaces Connectivity – 10/100M Ethernet (RJ45) Serial Port – UART0 access via 6 pin 3.3V TTL Header. Header is populated USB – USB 2.0 Client port: Access to […]

January 27, 2016January 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Orange Pi One Quad Core ARM Linux Development Board Launched for $9.99

Orange Pi One board was unveiled at the end of last year as a cheaper alternative to Orange Pi PC with Allwinner H3 quad core processor, 512 MB RAM, an Ethernet Port and HDMI output. I’ve already compared it to C.H.I.P and Raspberry Pi Zero, and found that it was both much more powerful and cheaper to use as an Internet connected board with HDMI output than the two more well-known competitors. The good news is that Orange Pi One is now selling for $9.99 + shipping on Aliexpress, which in my case would be $13.38 in total. Orange Pi One technical specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 512 MB DDR3 Storage – micro SD card slot Video & Audio Output – HDMI with CEC support Connectivity – 10/100M Ethernet USB -1x […]

January 22, 2016 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

NanoPi 2 Fire Board Adds Gigabit Ethernet and Power Management, Drops WiFi and Bluetooth

NanoPi 2 board, based on Samsung S5P4418 quad core Cortex A9 processor with WiFi and Bluetooth, has now gotten a brother, called Nano Pi 2 Fire, with wireless connectivity replaced by Gigabit Ethernet, and a power management IC (PMIC) for software power-off, sleep and wakeup. NanoPi 2 Fire specifications: SoC – Samsung S5P4418 quad core Cortex A9 processor @ up to 1.4GHz System Memory – 1GB 32bit DDR3 Storage – 1x Micro SD Slot Connectivity – Gigabit Ethernet port Video Output / Display I/F- 1x HDMI 1.4a, 0.5 mm pitch SMT FPC seat for full-color LCD (RGB: 8-8-8) Camera – 24-pin DVP interface; 0.5mm pitch USB – 1x USB Host port; 1x micro USB 2.0 OTG port for power and data Expansions Headers – 40-pin Raspberry Pi compatible header with UART, I2C, SPI, GPIOs… Debugging – 4-pin header for serial console Misc – User and reset buttons, power and user […]

January 19, 2016 by Jean-Luc Aufranc (CNXSoft) - No Comments

Renesas GR-PEACH mbed Board Features RZ/A1H Processor with 10MB On-chip Memory

Renesas RZ/A1 ARM Cortex A9 processors were unveiled in 2013, and one of the differentiating feature was the large amount of on-chip SRAM with up to 10MB for RZ/A1H model. The following year, Renesas’ RZ/A1 professional development kit, and some RZ/A1H modules were launched, and I’ve now just seen a tweet about Renesas GR-PEACH development board that is mbed compatible, feature Renesas RZ/A1H processor, and happens to be pink. There are actually two models based on the same PCB: GR-PEACH normal without header, and a “WiFi” connector, and GR-PEACH Full with female headers and an Ethernet port. Both basically share the same specifications: SoC – Renesas RZ/A1H ARM Cortex-A9 Core @ 400 MHz with 10MB on-chip RAM, NEON and FPU, and 128KB L2 cache Storage – 8MB FLASH + micro SD slot Connectivity – Normal: Optional BP3595 WiFi module; FULL: 1x 10/100M Ethernet(Microchip LAN8710A); Both: Xbee connector (unpopulated) USB – […]

January 16, 2016January 17, 2016 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

PixiePro Board Combines NXP i.MX6Q Processor with WiFi 802.11ac, Bluetooth 4.2, NFC, GPS, and a 3G Modem

Saying that the market now provides a wide range of development boards is probably an understatement, but Code Ing has found out that most hobbyist boards had limited on-board wireless connectivity with WiFi and Bluetooth basically the best you could expect, with any extra wireless functionality requiring USB dongles. So the company designed PixiePro single board computer powered by NXP i.MX6Q quad core Cortex A9 processor with on-board wireless connectivity including WiFi 802.11ac, Bluetooth 4.2, GPS/GLONASS, NFC and a 3G module. PixiePro board specifications: SoC – NXP i.MX6Q quad core Cortex A9 processor @ 1 GHz with Vivante 2D and 3D GPUs System Memory – 2GB 64-bit DDR3 Storage – 2x UHS-I micro SD card slot up to 104 MB/s Video Output – micro HDMI up to 1080p60 Audio Output – HDMI and 3.5mm mini TOSLINK optical port/Line Out Connectivity WiFi 802.11 a/b/g/n/ac 2×2 MIMO with two antenna connectors Bluetooth […]