din rail News - CNX Software - Embedded Systems News

August 3, 2025August 3, 2025 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

EdgeLogix-1145 – A Raspberry Pi CM5-based PLC with dual GbE, RS485, RS232, 24V DI/DO, and analog inputs

OpenEmbed EdgeLogix-1145 is a Raspberry Pi CM5-based PLC (Programmable Logic Controller) with two Gigabit Ethernet ports and a terminal block with RS232, RS485, 24V DI/DO, and analog inputs operating in the 0 to 10V range. The DIN rail-mountable controller also features an HDMI output port, a microSD card slot, a USB 3.0 port, a USB-C port, support for WiFi 5, Bluetooth 5.0, and 4G LTE connectivity, and a local bus with GPIOs and SPE (Single Pair Ethernet). EdgeLogic-1145 specifications: SoM – Raspberry Pi CM5 SoC – Broadcom BCM2712 CPU – Quad-core Cortex-A76 @ 2.4 GHz GPU – VideoCore VII Memory – 1GB, 2GB, 4GB, or 8GB RAM Storage – 0GB (CM5 Lite), 8GB, 16GB, or 32GB eMMC flash Wireless – Optional WiFi 5 and Bluetooth 5.0 Storage – MicroSD card slot for CM5 Lite module Video Output – HDMI port up to 4Kp60 Networking 2x Gigabit Ethernet ports, one native, […]

July 30, 2025 by Debashis Das - 1 Comment

DIN rail-compatible industrial relay board features 4 outputs, 4 analog/digital inputs, RS-485 interface

The ESC3B04 is a compact DIN rail-compatible relay board built around the ESP32-C3 Super Mini module for building Wi-Fi remote switches, voltage monitoring systems, motor control, timed automation, and RS-485-based setups. The board features four 10A relay outputs, four 0–5V/10V analog voltage inputs (also configurable as 12–24V PNP digital inputs), an RS-485 interface, and a push-button input. It operates on a 7–25V DC supply and supports direct installation in control panels or DIN-rail enclosures. ESC3B04 relay board specifications: Wireless module –16-pin ESP32-C3 Super Mini module SoC – Espressif Systems ESP32-C3FH4, single-core 32-bit RISC-V microcontroller @ up to 160 MHz; 400 KB SRAM; 4MB flash USB – 1x USB Type-C port for programming Ceramic antenna I/Os and expansion 4x relays (10A/240VAC) 4x 0-5V/0-10V analog voltage inputs (can be used as 12-24V digital inputs) Serial – RS-485 interface for Modbus or custom protocol communication Misc User button Power LED Power Supply 7-25V […]

July 25, 2025 by Debashis Das - 2 Comments

Industrial LoRa remote switches offer 3.5km range, real-time feedback

CDEBYTE EWD22S series industrial LoRa remote switchs

The CDEBYTE EWD22S series is a set of LoRa-based remote control switches designed for long-range industrial applications. The three key products of the series include the EWD22S-A01TR and EWD22S-D02XR relay modules, and the EWD22S-YK02A handheld remote. The EWD22S-A01TR module handles up to 30A/5kW loads, while the EWD22S-D02XR handles up to 10A/1kW. The EWD22S-YK02A handheld remote can be paired with the relay modules to control them remotely. The remote includes a 9V battery, a high-gain antenna, and multi-color LED indicators for signal confirmation, fault detection, and low battery alerts. The solution relies on LoRa in the 410–493MHz frequency band and offers a range of up to 3.5km in open environments. Protection features include zero-crossing detection, power isolation, and flame-retardant housing. The PCB features a tri-proof coating for protection against humidity, mold, and salt spray. Both relay modules support DIN rail and a screw mounting option for easy installation. EWD22S series specifications: Wireless […]

May 30, 2025May 30, 2025 by Debashis Das - No Comments

DFRobot Edge101 ESP32 industrial IoT controller offers isolated RS485 and CAN Bus interfaces

DFRobot Edge101 is an industrial-grade IoT controller built around the ESP32 MCU, designed as a bridge between development boards and industrial IoT systems. Housed in a full metal enclosure, it comes with various protection features including surge, ESD, lightning, overvoltage, and reverse polarity protection, and supports continuous 24/7 operation in harsh environments. It integrates RS-485, CAN bus, Ethernet, Wi-Fi, Bluetooth, and RTC, and supports expansion via a PCIe slot for 4G LTE cellular communication, making it suitable for automation, environmental monitoring, and remote data acquisition in industrial or outdoor settings. The IoT controller also offers flexible mounting options such as DIN rail or ear mounting. DFRobot Edge101 specifications: Wireless MCU – Espressif Systems ESP32 CPU – Dual-core Tensilica LX6 microcontroller @ up to 240 MHz Memory – 520 KB SRAM, 16 KB RTC SRAM Wireless – WiFi 4 and Bluetooth 4.2 Storage – 4MB SPI NOR flash, MicroSD card slot Connectivity […]

December 12, 2024December 13, 2024 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Sfera Labs Strato Pi Max DIN rail industrial controllers now support the Raspberry Pi Compute Module 5

Raspberry Pi Compute Module 5 industrial controllers

The Raspberry Pi Compute Module 5 (CM5) was launched at the end of last month, and we are starting to see companies slowly announce upgraded CM4 designs. Yesterday, we wrote about EDATEC ED-IPC3100 DIN-Rail mountable industrial computers, and today, we’ll cover Sfera Labs’ addition of the Raspberry Pi Compute Module 5 to their Strato Pi Max DIN rail industrial controllers. The controllers still feature a gigabit Ethernet port, a 10/100M Ethernet port, two USB 2.0 ports, a Raspberry Pi RP2040 microcontroller for power management and boot sequence control, and support expansion modules for up to sixteen RS-485 or RS-422 ports, four CAN V2.0B ports, digital and analog I/O, and more. Strato Pi Max specifications (as of December 2024): Base Module Raspberry Pi Compute Module 5 Raspberry Pi Compute Module 4 Zymbit SCM options. Microcontroller – Raspberry RP2040 dual ARM Cortex-M0+ at 133 MHz. Storage – eMMC, microSD (dual for XL), M.2 PCIe […]

May 20, 2024May 19, 2024 by Debashis Das - 2 Comments

Seeed Studio reComputer R1025-10 industrial IoT gateway supports Ethernet, RS485, 4G LTE, LoRa, Zigbee, Wi-Fi, BLE

The reComputer R1025-10 is a Raspberry Pi CM4-based DIN Rail industrial gateway and edge IoT controller designed by Seeed Studio. The company mentions that the R1025-10 is the first module in the reComputer R1000 series and it’s equipped with 4GB RAM and 32GB of eMMC version of the CM4 module. That simply means the company will launch Edge IoT controllers in the series which will host different variants of the CM4 module. The R1025-10 gateway is features rich and includes two Ethernet interfaces, three isolated RS485 interfaces, and a variety of optional wireless modules including 4G, LoRa, Zigbee, or Wi-Fi/BLE. Other features include an HDMI port, two USB Type-A ports, and a USB Type-C 2.0 port. Previously we have covered many Din Rail IoT gateways like the IOT-DIN-IMX8PLUS, Cytron IRIV PiControl, the Robustel EG5101 and EG5200 and many others feel free to check those out if you are looking for […]

May 19, 2024 by Tomisin Olujinmi - 7 Comments

FLIP_C3 ESP32-C3 board takes up to 60V DC input, ships with ESPHome firmware

Voidbox FLIP_C3 is an open-source hardware board powered by an ESP32-C3 WiFi & BLE microcontroller that takes up to 60V DC power input feeding a 5V/2A DC-DC step-down converter and flashed with ESPHome firmware by default for Home Assistant support. The board incorporates a push-in spring release connector which means stranded (ferrules or tinning are suggested) and solid wires can be used in deploying the device in off-grid/battery-powered systems with up to 16s LiFePO4 delivering 48V through the 6-60V input port on the ESP32-C3 board. The onboard WS2812B LED can be used as a null pixel/level shifter for longer strings of addressable pixels. The ESP32-C3 – due to its support for Wi-Fi and BLE connectivity – is a popular SoC for IoT solutions and powers home and industrial automation devices such as NanoCell v2.1, Spark Analyzer, LOLIN C3 Pico, and the LILYGO T-RSC3. It is built for home automation applications […]

May 2, 2024May 2, 2024 by Jean-Luc Aufranc (CNXSoft) - No Comments

NXP i.MX 8M Plus powered DIN-Rail IoT gateway takes DIO, RS232, RS485, and ADC expansion modules

Compulab IOT-DIN-IMX8PLUS IoT gateway with IO modules

Compulab IOT-DIN-IMX8PLUS is a DIN Rail IoT gateway powered by an NXP i.MX 8M Plus AI SoC that takes various expansion modules with digital inputs and outputs (DIO), RS232, RS485, or ADC. The new model looks to be an evolution of the Compulab IOT-GATE-IMX8PLUS Arm Linux IoT gateway introduced in 2022 with many of the same features, except the IOT-DIN-IMX8PLUS is designed to be installed in a cabinet or other installation with a DIN Rail, and can easily be connected to additional I/O modules. Compulab IOT-DIN-IMX8PLUS specifications: SoC – NXP i.MX 8M Plus Quad or Quad-lite CPU Quad-core Arm Cortex-A53 processor @ up to 1.8 GHz Arm Cortex-M7 real-time core @ 800 MHz GPU – Vivante GC7000UL 3D GPU, Vivante GC520L 2D GPU VPU – 1080p H.265/H.264 video decoder & encoder DSP HiFi 4 DSP AI accelerator – 2.3 TOPS Neural Processing Unit (NPU) on i.MX 8M Plus Quad only […]