ethernet News - Page 12 of 17 - CNX Software

February 10, 2017February 10, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

22€ Olimex ESP32-EVB ESP32 Development Board Features an Ethernet Port and Relays

We already have a good choice of ESP32 development boards, but none of the ones I’ve seen make use of the Ethernet MAC interface found in Espressif ESP32 SoC. Olimex has changed that with their ESP32-EVB featuring ESP32-WROOM32 module as well as one Fast Ethernet port and two relays. Olimex ESP32-EVB specifications: Wireless Module – ESP32-WROOM32 module with 802.11 b/g/n WiFi and Bluetooth LE Wired Connectivity – 10/100M Ethernet RJ45 port External Storage – micro SD slot Relays – 2x 10A/250VAC relays Expansion 40-pin GPIO female header (2.54mm pitch) UEXT connector for sensors and modules Misc – 2x user buttons Power Supply 5V power jack LiPo charger and step up converter allowing ESP32-EVB to run from LiPo battery The company still have to write software samples, and do some testing to make sure the board work before going into mass production. Once everything is cleared, the board will be sold […]

February 3, 2017February 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Targus Universal DisplayLink Docking Stations Support Up to Six 4K Monitors via a Single USB Cable

USB type C connectors are becoming more and more common and beside transmitting data and power, some devices also support video over USB which requires a dock, and if you have some serious display requirements, Targus docking stations over USB-C or USB 3.0 might be what you are looking for, as they support two 4K monitors at the same time thanks to their multiple HDMI 2.0, DisplayPort 1.2a and DVI outputs, and you can even daisy-chain three docking stations over USB 3.0 type A cables in order to control six 4K monitors from one USB port. Targus has several models, but let’s check out the specifications of their “USB 3.0 DV4K DOCK160USZ dock station” pictured above: Chipset – DisplayLink DL-6950 Video Output Ports – 2x HDMI 2.0 ports, 2x DisplayPort 1.2a ports supporting up to dual 4K Ultra HD video @ 4096×2160 60Hz 24 bpp Audio – 1x 3.5 mm […]

December 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

AndromedaBox Networking Edge Board Includes a Dual Core Marvell Processor, SATA, Gigabit Ethernet, and More

Last year, Marvell introduced AndroMeda Box Edge IoT board using 96Boards form factor and running Brillo (now Android Things), but the company has been working on the similarly named AndromedaBox Networking Edge (ANE) board with a tweaked version of 96Boards form factor including Gigabit Ethernet and SATA, and powered by a dual core ARMADA 3700 processor. AndromedaBox Networking Edge specifications: SoC – Marvell ARMADA LP 3700 dual-core ARM Cortex 53 processor @ up to 1.2 GHz System Memory – 512MB LPDDR4 Storage – 8GB eMMC flash, 1x SATA 3.0 port Connectivity – 1x Gigabit Ethernet RJ45 port, 1×1 802.11ac Wi-Fi, and Bluetooth 4.2 USB – 2x micro USB 2.0 port, 1x USB 3.0 port Expansion – 1x PCIe 2.0 (maybe via a slot on the back of the board), 40-pin LS (Low Speed) Expansion connector Power Supply – Likely 8 to 18V input as per 96Boards specs Dimensions – 85 […]

September 23, 2016April 16, 2018 by Jean-Luc Aufranc (CNXSoft) - 48 Comments

Marvell ESPRESSOBin Board with Gigabit Ethernet, SATA, mini PCIe, and USB 3.0 To Launch for $39 and Up (Crowdfunding)

I can often read people hoping for an inexpensive community board for network, storage and connectivity applications with high speed interface like SATA, multiple Gigabit Ethernet port, USB 3.0 and/or mini PCIe, and that’s exactly what Globalscale Technologies is about to offer with their Marvell ARMADA 3700 based ESPRESSOBin development board to go for $39 and up via Kickstarter. Marvell ESPRESSOBin board specifications: SoC – Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz System Memory – 512MB DDR3 or optional 1GB DDR3 Storage – 1x SATA interface, 1x micro SD card slot with footprint for an optional 4GB EMMC Network Connectivity 1x Topaz Networking Switch 2x GbE Ethernet LAN 1x Ethernet WAN 1x MiniPCIe slot for Wireless/BLE periphereals USB – 1x USB 3.0, 1x USB 2.0, 1x micro USB port Expansion – 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, […]

July 20, 2016July 20, 2016 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Getting Started with NanoPi NEO Development Board – Ubuntu Core Firmware

NanoPi NEO is an exciting ARM Linux board due to the power it packs into its small size, and its low price starting at $7.99. It’s made by FriendlyARM, and since I’ve read some people had never heard about the company before, I’d like to point out it has been providing development boards well before the Raspberry Pi board was launched, with products such mini2440 based on a Samsung ARM9 processor introduced around year 2010. Anyway, I asked the company if they were willing to send 2 samples for review, as I plan to remove the USB & Ethernet port on one of them. Instead I got a 4 boards and accessories, so I’m going to start reviewing the board by writing a quick start guide, showing how to setup it, and check out the Ubuntu core provided by the company. If you are a fan of armbian made Debian […]

May 11, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Arduino Yún Shield Adds Ethernet and WiFi to Arduino Boards for $50

You can now add WiFi to Arduino for about $3 thanks to ESP8266, and it’s been long possible to add Ethernet with ENC28J60 module now selling for the same $3. Alternatively, if you want some a little more powerful, you could also use IoT modules running OpenWrt such as a $30 WrtNode or $13 LinkIt Smart 7688 both capable of supporting Ethernet with some hacks. But if you’ve been used to Arduino Yun, have a few spare Arduino boards, or simply think the other solutions are just too cheap, Arduino LLC has just launched Arduino/Genuino Yún Shield for $49.90 / 43.90 Euros. Arduino Yún Shield specifications: SoC – Qualcomm Atheros AR9331 MIPS WiSoC @ 400 MHz System Memory – 64 MB DDR2 Storage – 16 MB flash Connectivity – 10/100 M and 802.11 b/g/n WiFi USB – 1x USB 2.0 host port Board interfacing – SPI and HW Serial Misc […]

May 8, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Qualcomm DragonBoard 600c 96Boards Development Board Includes Ethernet and SATA

A few weeks ago, I was informed that some code about DB600c board powered by Qualcomm Snapdragon 600 processor (APQ8064T) was making it into mainline Linux, and more recently I found a website listing DragonBoard 600c with a low resolution picture of the board. While we don’t have the complete specifications yet, the form factor of the board is quite interesting, as we’ll find the typical 96Boards CE form factor on the right, and some extra interfaces on the left with Ethernet and SATA. It turns out, as we’ll see below, it’s perfectly compliant (hardware wise) with 96Boards CE “Extended Version” specifications. Preliminary specifications of DragonBoard 600c board: SoC- Qualcomm Snapdragon 600 (APQ8064 Fusion 3) quad-core Krait processor @ 1.7 GHz with Adreno 320 GPU @ 400MHz System Memory – 1GB or more RAM (TBD) Storage – eMMC Flash + micro SD slot + SATA port Video Output – HDMI […]

May 4, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Olimex A20-OLinuXino-LIME2-eMMC Board Replaces NAND by eMMC Flash for Better Performance & Reliability

A20-OLinuXino-LIME boards are the most popular development board sold by Olimex, likely thanks to reasonable pricing, and Allwinner A20 is one of the rare low cost processor to features an actual SATA interface and Gigabit Ethernet support. The company has now launched a new version A20-OLinuXino-LIME2-eMMC, based on A20-OLinuXino-LIME2-4GB, but replacing the NAND flash by an eMMC flash that should offer both better performance and reliability. A20-OLinuXino-LIME2-eMMC specifications: SoC – Allwinner A20 dual-core ARM Cortex-A7 CPU @ 1.0 GHz with dual-core Mali 400 GPU System Memory – 1GB DDR3 Storage – 4GB eMMC flash (Micron), SATA data and power connectors, micro SD slot, 2KB EEPROM for MAC address and custom data Connectivity – Gigabit Ethernet Video Output – HDMI up to 1080p60 USB – 2x USB 2.0 host ports with power control and current limiter, 1x micro USB-OTG with power control and current limiter Expansion – 160 GPIOs on four […]