Qualcomm DragonBoard 600c 96Boards Development Board Includes Ethernet and SATA

A few weeks ago, I was informed that some code about DB600c board powered by Qualcomm Snapdragon 600 processor (APQ8064T) was making it into mainline Linux, and more recently I found a website listing DragonBoard 600c with a low resolution picture of the board. While we don’t have the complete specifications yet, the form factor of the board is quite interesting, as we’ll find the typical 96Boards CE form factor on the right, and some extra interfaces on the left with Ethernet and SATA. It turns out, as we’ll see below, it’s perfectly compliant (hardware wise) with 96Boards CE “Extended Version” specifications.

DragonBoard 600c vs DragonBoard 410c
DragonBoard 600c vs DragonBoard 410c

Preliminary specifications of DragonBoard 600c board:

  • SoC- Qualcomm Snapdragon 600 (APQ8064 Fusion 3) quad-core Krait processor  @ 1.7 GHz with Adreno 320 GPU @ 400MHz
  • System Memory – 1GB or more RAM (TBD)
  • Storage – eMMC Flash + micro SD slot + SATA port
  • Video Output – HDMI up to 1080p
  • Video Playback – 1080p@30fps HD video playback
  • Connectivity – Gigabit? Ethernet via PCIe . I can’t see WiFi and Bluetooth on the board, but since “Wi-Fi 802.11g/n and Bluetooth 4.0 LE” are required by 96Boards the specs, it could be on the back of the board.
  • USB – 2x USB 2.0 host ports, 1x micro USB port
  • Expansion:
    • 1x 40 pin low speed expansion connector – UART, SPI, I2S, I2C x2, GPIO x12, DC power
    • 1x 60 pin high speed expansion connector – 4L-MIPI DSI, USB, I2C x2, 2L+4LMIPI CSI
    • 1x 16-pin analog expansion connector – Headset, Speaker, FM antenna
    • One extra high speed? connector on the extended part of the board
  • Sensor – On-board magnetometer
  • Misc – Power, reset and volume buttons. 6 LEDS (4x user, 1x Wifi, 1x Bluetooth), RTC battery slot
  • Power Supply – 6.5 – 18V DC input (based on 96Boards specs)
  • Dimensions – 100 x 85 mm

The board should support the latest version of Android as well as Debian 8, based on the work done by Linaro on DragonBoard 410c.

Click to Enlarge
Click to Enlarge

I’ve included the mechanical drawing for 96Boards Consumer Edition Extended Version as it should that designer can pretty much do whatever they want in the extended area, except for the position of mounting holes and power jack, and the maximum height of components limited to 6.5mm for Extended A, and 15 mm for Extended B.

I’m not sure when the board will be formally introduced and available, but considering there are working samples for developers, and most features have been found to work, it might not be too far away. There’s also a DragonBoard 820c with APQ8096 processor in the works, but I could not find pictures, nor code commits about DB820c, so the launch is likely many months away, or possibly early next year.

Share this:
FacebookTwitterHacker NewsSlashdotRedditLinkedInPinterestFlipboardMeWeLineEmailShare

Support CNX Software! Donate via cryptocurrencies, become a Patron on Patreon, or purchase goods on Amazon or Aliexpress

ROCK 5 ITX Rockchip RK3588 mini-ITX motherboard

11 Replies to “Qualcomm DragonBoard 600c 96Boards Development Board Includes Ethernet and SATA”

  1. I would be quite happy with Snapdragon 820 + decent amount of memory (2GB lowest, 4GB preferred). I hope they will continue that and even cook up 830 version in the future. All of this is bound to get upstream support. Love it.

  2. It’s won’t be cheap at first, but with time prices will come down.

    BTW, this seem to be a much more complete board than the vanilla version.

  3. @davidlt
    according to the site mentionned by cnxsoft, arrow plans to release a dragonboard 820c in the future
    @cortex-a72
    if it’s more expensive than 150$, then the ifc410 sbc would be a better choice

  4. LINARO should stick to software, instead of failing at hardware specifications. If you look around you’ll see the board designers and users less than happy with their mess.

  5. I highly doubt, that “the price will come down”. This is not a consumer product with high volume and demand based pricing.

  6. I’m not saying the prices of all 96 boards will go down. I’m saying the prices of the few most popular boards will do. And the DB610c has much better chances of gaining popularity with its much more adequate IO. As per demand, the demand for such devices can be more than sufficient to drive the prices down. For reference, check the RPi: model A – $25, A+ – $20, model B – $35, B+ – $25, etc.

Leave a Reply

Your email address will not be published. Required fields are marked *

Boardcon Rockchip RK3588S SBC with 8K, WiFI 6, 4G LTE, NVME SSD, HDMI 2.1...
Boardcon Rockchip RK3588S SBC with 8K, WiFI 6, 4G LTE, NVME SSD, HDMI 2.1...