h.264 News - Page 5 of 6 - CNX Software

June 5, 2016June 27, 2016 by Jean-Luc Aufranc (CNXSoft) - 35 Comments

Beelink BT7 Review – Windows 10 mini PC Based on Intel Atom x7-Z8700 Processor

Beelink BT7 mini PC powered by Intel Atom x7-Z8700 processor offers an interesting alternative to the fanless Voyo V3 mini PC, as it is actively cooled by a small fan, supports (Gigabit) Ethernet, and comes with three full USB 3.0 ports. There are three versions with either 64, 128 (64+64) or 320 (64+256) GB stortage, and I got Beelink BT7 128GB to play with. Since I’ve already checkout the hardware, I’ll focus on the performance and stability of the device on Windows 10 in the second part of the review. Setup and System Information I placed the mini PC on my desk, made use of the three USB 3.0 ports with a USB keyboard, a USB mouse, and a Seagate USB 3.0 hard drive, and connected Ethernet, HDMI and the power cable. However, if you happen to own a TV or monitor that supports VESA mounts, you can use the […]

June 3, 2016June 3, 2016 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

VATek VMB8202D Enmoder SoC Supports DVB, ATSC, DTMB and ISDB Modulation, H.264 & MPEG-2 Encoding up to 1080p30

Terrestrial digital TV transmitters normally cost over 1,000 dollars because there are usually implemented with expensive FPGA chips, but Taiwan based VATek has designed a low cost chips such as VMB8202D Enmoder (aka B2 Enmoder) capable of encoding 1080p60 video input to MPEG-2 (1080p30 max) or H.264 (SD resolution max), and transmitting the resulting video over DVB-C, DVB-T, ATSC, DTMB, or ISDB-T standards. VATek B2 Enmoder SoC specifications: CPU – 32-bit RISC @ 400MHz Memory – Built-in DDR Modulation Engine – VATek Multi-standard Modulator 1.0 ATSC / DTMB / DVB-T / DVB-C Media Encoder – VATek Ultral Low Latency HD Encoder supporting 1080p30 or SD MPEG-2 and SD H.264 encoding Audio Formats – MPEG-1 Layer 2, AAC Raw Video Inputs – 1x ITU-R BT.1120 or 2x ITU-R BT.656 up to 74.25MHz pixel clock Raw Audio Inputs – I2S up to 48kHz sample rate Stream Input Interface – Ethernet, Transport Serial […]

May 23, 2016 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

HawkEye I is a Compact & Lightweight COFDM / DVB-T Video Transmitter with Up to 10 km Range

Shenzhen Falco-Tech Corp has designed a small COFDM transmitter mostly useful for drones, unless you want to make you own very local TV station, that can transmit video from an HDMI camera such as GoPro Hero 4, and compatible with any DVB-T TV tuners as it sends the video unencrypted. HawkEye I DVB-T transmitter specifications: Transmission – COFDM technology Channel bandwidth – 6/7/8MHz (optional) Frequency – 200MHz-2400Mhz (optional) Forward coding – 1/2,2/3,3/4,5/6,7/8 Guard interval – 1/32,1/16,1/8,1/4 Range – Up to 1.5km to 10km SMA antenna connector Video Input – CVBS or HDMI Video Codec – H.264/H.265 encoding with hardware acceleration Resolution – SD/D1/720P/1080p Framerate – 25/30/60 fps Power Supply – 12V via 2-pin terminal Dimensions – 84 x 25 x 90mm (Aluminum case) Weight – 143 grams Operating Temperature Range – -20~60 degrees Celsius There’s no word about power consumption, so it’s unclear how it would impact fly time. I’m […]

April 11, 2016April 11, 2016 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Zidoo X1 II 4K Android TV Box (Rockchip RK3229) Review

After skipping MXQ-4K TV box review due to severe issues with video playback, Zidoo X1 II is actually the first device powered by Rockchip RK3229 processor that I’ve fully tested. I’ve already taken pictures of the box, and opened it up to check the board in Zidoo X1 II unboxing and teardown post, and confirmed 4K videos could play pretty well from my USB hard drive using Zidoo Media Center after disabling Media Scanner process. So today, I’ll review other parts of the firmware, as well as video playback with ZDMC 16.0, Zidoo’s fork of Kodi 16.0. First Boot, Settings and First Impressions The device only has two USB ports, and I used one for a USB hard drive, and the other for RF dongles for MINIX NEO A2 Lite air mouse, a USB keyboard, and the RF dongle for Tronsmart Mars G01 gamepad via a USB hub. I also […]

April 10, 2016April 11, 2017 by Jean-Luc Aufranc (CNXSoft) - 39 Comments

Zidoo X9s Android 6.0 TV Box Features Realtek RTD1295 Processor with SATA 3.0, HDMI 2.0a Output and Input

Zidoo has been busy this year, after releasing Zidoo X5 and Zidoo X1 II in Q1 2016, the company is about to launch Zidoo X9s Android media recorder and player, successor of Zidoo X9, powered by Realtek RTD1295 quad core Cortex A53 processor, and be one of the first TV box to run Android 6.0. Zidoo X9s preliminary specifications: SoC – Realtek RTD1295 quad core Cortex A53 processor with ARM Mali-T820 MP3 GPU System Memory – 2GB DDR3 Storage – 16GB eMMC + micro SD slot + SATA 3.0 interface (external?) Video I/O – HDMI 2.0a output, AV output, and HDMI input (recording and streaming up to 1080p @ 60 Hz) Audio I/O – HDMI in and out, 1x S/PDIF output Video Playback – HDR, 10-bit HEVC/H.265 up to 4K @ 60fps, H.264 up to 4K @ 24 fps, VP9 up to 4K @ 60 fps, BDISO/MKV, etc… automatic frame […]

March 31, 2016 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

Unboxing and Teardown of Zidoo X1 II Android TV Box

MXQ-4K, the first Android TV box based on Rockchip RK3229 I received, was a massive disappointment to me as it was unusable to play 4K videos possibly due to CPU throttling and/or poorly optimized USB storage support. So I was eager to try another device based on the latest Rockchip media processor with support for 4K 10-bit H.265 and H.264 video playback, and Zidoo sent their Zidoo X1 II TV box for review on CNX Software. Today, I’ll start by checking the device and the hardware, before testing the firmware later on. Zidoo X1 II Unboxing I got the device by DHL in the usual Zidoo’s white and green package with some icons representing the key features: 4K, 3D, ZIUI user interface, WiFI, 10-bit HEVC… ZDMC is the custom version of Kodi developed by the company, and that makes Zidoo one of the rare companies to respect Kodi’s trademark. The […]

March 16, 2016March 16, 2016 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Accelerated 3D Graphics, Hardware Video Decoding, and Network Performance on Orange Pi One Board (Video)

I’ve just written Getting Started Guide for Orange Pi One, a $10 development board based on Allwinner H3 quad core Cortex A7 processor, where I explain how to install and configure Armbian distribution on the board. As promised, I’ve also tested 3D graphics acceleration, and hardware video decoding, and also included some Ethernet benchmarks. Since ARM Mali-400 GPU found in Allwinner H3 is only capable of OpenGL ES, as in most ARM SoCs, you can test 3D graphics acceleration by using es2gears (and not glxgears as I’ve seen some other do in the past):

es2gears
EGL_VERSION = 1.4 Linux-r3p0-04rel0
vertex shader info:
fragment shader info:
info:
1463 frames in 5.0 seconds = 292.425 FPS

es2gears

EGL_VERSION = 1.4 Linux-r3p0-04rel0

vertex shader info:

fragment shader info:

info:

1463 frames in 5.0 seconds = 292.425 FPS

The log shows the utility is using Linux-r3p0 Mali driver, and the gears are display at a high frame rate close to 300 fps. If I switch to full screen, the frame rate drops to about 43 fps, which should still be acceptable. CedarX is the infamous closed source and GPL violating media library released […]

March 9, 2016March 9, 2016 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

10-bit H.264 and H.265 Video Playback in MXQ-4K Rockchip RK3229 TV Box

Rockchip RK3229 is an exciting media processor because it’s found in ultra low cost TV Boxes such as MXQ-4K, outputs up to 4K @ 60 Hz, and supports 4K video decoding of 10-bit H.264, 10-bit H.265 and VP9, including videos with very high bitrates (200+ Mbps). That’s the theory, which I’ve put to the test with MXQ-4K TV box. Since the network interfaces of the device are limited to 100M Ethernet and 802.11n WiFi, and some videos are well above 100 Mbps, I’ve decided to test video playback from a USB hard drive instead. I’ve tried the three pre-installed video player apps: Kodi 15.1, “Video”, and “Video Player” , and they all have similar capabilities except Kodi is a little less stable on this device. The system detected my 4K TV (LG ) and automatically set the resolution to 3840×2160 @ 60 Hz, which I used for the remainder of […]