industrial

Posted on by Jean-Luc Aufranc (CNXSoft) - 5 Comments on Axiomtek MANO300 Industrial mini-ITX Board Features Intel Celeron N3150 Processor, Plenty of Interfaces

Axiomtek MANO300 Industrial mini-ITX Board Features Intel Celeron N3150 Processor, Plenty of Interfaces

Axiomtek MANO300 is an industrial grade fanless mini-ITX motherboard powered by an Intel Celerron N3150 “Braswell” quad core processor with two SO-DIMM slots, two SATA interfaces, dual Gigabit Ethernet, several serial interfaces and more, targeting automation and embedded industries. MANO300 board specifications: SoC – Intel Celeron N3150 quad core Braswell processor @ up to 2.08 GHz with Intel HD Gen8 Graphics System Memory – 2x 204-pin SO-DIMM dual channel DDR3L-1333 up 8 GB Storage – 1 x SATA-600, 1x mSATA, SDXC card slot Display – 1x VGA, 1x HDMI, 1x LVDS (Up to 3 independent displays supported) Connectivity – 2 x 10/100/1000Mbps (Realtek RTL8111F) Serial 2x RS-232/422/485 (DB9) 4x RS-232 (one with 5V/12V power select) via connectors USB – 4x USB 3.0 host ports, 2x USB 2.0 (internal) Audio – Mic-in/Line-out Expansion – 1x PCIe x1, 1x PCI Express Mini Card with SIM card slot, 8x digital I/Os Misc – […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on iWave Systems iW-RainboW-G20M-Q7 SoM Features Renesas RZ/G1M Cortex A15 SoC

iWave Systems iW-RainboW-G20M-Q7 SoM Features Renesas RZ/G1M Cortex A15 SoC

iWave Systems has unveiled a new Qseven 2.0 compliant system-on-module part of their RainboW family with iW-RainboW-G20M-Q7 module powered by Renesas RZ/G1M dual core ARM Cortex A15 SoC, and targeting industrial and automotive applications with over 10 years of support. iW-RainboW-G20M-Q7 module specifications: SoC – Renesas RZ/G1M dual core ARM Cortex A15 @ 1.5GHz with PowerVR SGX544MP2 GPU @ 520MHz System Memory – 1GB DDR3(expandable) Storage – 4GB eMMC Flash (expandable) + 2MB SPI NOR Flash for boot code, and optional Micro SD Slot Connectivity – 1x Gigabit Ethernet  PHY USB – 2 Port USB HUB I/Os via 230-pin Qseven edge connector: Storage – 1x SATA , 1x SDHC USB – 1x USB3.0 host, 2x USB 2.0 hosts, or 1x USB 2.0 device Display – 1x LVDS Connectivity – 1x Gigabit Ethernet Audio – 1x I2S Audio 2x PWM, 2x I2C, SPI, CAN, UART, GPIOs 1x PCIe (multiplexed with SATA) JTAG or […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Kondor AX FPGA + ARM Networking Board Targets Base Stations, IoT Gateways and IP Cameras

Kondor AX FPGA + ARM Networking Board Targets Base Stations, IoT Gateways and IP Cameras

Mikro Project, a company based in Zagreb, Croatia, has recently introduced Kondor AX “Advanced System Development Board” combining  Freescale i.MX6Solo processor with Lattice ECP5 FPGA, and targeting “low power applications at the network edge including HetNet (Heterogeneous Networks), Small Cells, Industrial IoT gateways and IP Cameras.” Kondor AX development board specifications: Category Lattice ECP5 LFE5UM-85F-BG756 FPGA Freescale i.MX6 Solo SoC Description 84.000 LUTs 207 Block RAMs 156 18×18 Multipliers 365 IO pins 4 SERDES channels (In/out) 400 MHz LPDDR3 Memory Support 4 PLLs, 4 DLLs ARM Cortex A9 @ 1 GHz 512 KB L2 cache GPU 3D – Vivante GC880 Video Decode: 1080p30 + D1 Video Encode: 1080p30 H.264 BP/ Dual 720p encode Programming options On-board USB JTAG interface 10-pin JTAG header Using i.MX6 processor Memory & Storage 512MB LPDDR3-1600 800 MHz Clock Rate 1x 32-bit channel 512 MB 32-bit DDR3 64Mbit SPI Flash 8GB eMMC Micro SD Card Connectivity  […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 8 Comments on Compulab Unveils CL-SOM-iMX7 Freescale i.MX7 System-on-Module and SBC-iMX7 Single Board Computer

Compulab Unveils CL-SOM-iMX7 Freescale i.MX7 System-on-Module and SBC-iMX7 Single Board Computer

After a few years of speculations and developments about i.MX7 and i.MX8 processors, Freescale announced Freescale i.MX7 family this summer. The new processors are based on one or two Cortex A7 cores coupled with a Cortex-M4 MCU for real-time tasks, and are a low power alternative to Freescale i.MX6 processors. But so far I had only seen a few announcements such Toradex i.MX7 SoM or Freescale 96Boards, without any product actually shipping, and Compulab claims to the first to market with a Freescale i.MX7 system-on-module, namely their CL-SOM-iMX7 SoM which will ship in quantities in early January 2016. CL-SOM-iMX7 system-on-module specifications: SoC Freescale i.MX 7Solo single core Cortex-A7 @ 800MHz with NEON SIMD and VFPv4 + ARM Cortex-M4 @ 200Mhz Freescale i.MX 7Dual dual core Cortex-A7 @ 1GHz with NEON SIMD and VFPv4 + ARM Cortex-M4 @ 200Mhz System Memory – 256MB to 2GB DDR3L-1066 Storage – 128MB – 1GB […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on MYIR Tech Introduces TI Sitara Cortex A9 MYC-C437X SoM and MYD-C437X Development Board

MYIR Tech Introduces TI Sitara Cortex A9 MYC-C437X SoM and MYD-C437X Development Board

MYIR Tech previously launched Ricoboard, a low cost single board computer powered by Texas Instruments AM4379 ARM Cortex A9 processor. The company has now introduced a system-on-module based on Sitara AM437x processors, as well as a corresponding carrier board for industrial applications. MYIR Tech MYC-C437x Sitara AM437x System-on-Module MYC-C437x SoM specifications: SoC – Texas Instruments AM437x single core ARM Cortex A9 processor @ up to 1GHz (AM4376, AM4377, AM4378, AM4379) with PowerVR  SGX530 GPU (for AM4378/AM4379) System Memory – 512MB DDR3 (256MB optional) Storage – 4GB eMMC Flash (reserved 256/512MB Nand Flash design), 16MB QSPI Flash (unpopulated by default), 32KB EEPROM Connectivity – Gigabit Ethernet PHY Peripherals and signals via 2x 100-pin board to board connectors (0.8mm pitch): 2x Gigabit Ethernet 2x USB 6x Serial ports, 2 x CAN 2x I2C, 2 x SPI 14x ADC (8 channels from ADC1 and 6 channels from ADC0) 3x SDIO 2x Camera interfaces JTAG […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on EmbPower Provides Nvidia Tegra K1 RTX Modules, Carrier Boards, and Industrial Computers

EmbPower Provides Nvidia Tegra K1 RTX Modules, Carrier Boards, and Industrial Computers

EmbPower is a Taiwanese company that first focused on graphic cards, but has since then also developed other solutions requiring high GPU performance for military & aerospace applications as well as medical equipment. One of these products is TK1 Carrier Board with TK1 SoM powered by Nvidia Tegra K1 quad core processor, that can be encapsulated into TK1 PowerUnit industrial computer. There are actually two TK1 carrier boards: the larger V1.2 with more ports and features, and the smaller V2.0 that is used in TK1 PowerUnit Box, but they share most of the same (preliminary) specifications: SoC – Nvidia Tegra K1 quad core ARM Cotax-A15 processor with Nvidia Kepler 192-core GPU System Memory – 2GB DDR3 @ 933 MHz Storage – 16GB eMMC flash and SPI serial flash. V2.0 only: Adds micro SD slot; V1.2 only: Adds SD slot and SATA Connectivity – Gigabit Ethernet; optional 802.11ac and Bluetooth 4.0 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Axiomtek PICO842 Fanless Bay Trail Pico-ITX Motherboard Includes a SO-DIMM Socket and SATA Ports

Axiomtek PICO842 Fanless Bay Trail Pico-ITX Motherboard Includes a SO-DIMM Socket and SATA Ports

Axiomtek PICO842 is a fanless Pico-ITX motherboard that features Intel Celeron J1900 quad core processor or Celeron N2807 dual core processor with up to 8GB DDR3L, and aimed at IoT & medical applications, automation, and embedded systems with wide temperature range requirements. Axiomtek PICO842 specifications: SoC Intel Celeron J1900 quad core processor up to 2.42 GHz OR Intel Celeron N2807 dual core processor up to 2.16 GHz System Memory – 1x DDR3L-1066/1333 SO-DIMM up to 8GB for J1900, and 4GB for N2807 Storage – 1x SATA-300, 1x mSATA Video Output – 1x 18/24-bit single/dual channel LVDS, and 1x HDMI or 1x VGA Audio – HD Codec audio (Realtek ALC662); MIC-in/Line-out Connectivity – Gigabit Ethernet (Intel i211AT) USB – 4x USB 2.0 host port Serial – 2x COM ports supporting RS-232, RS-422, and RS-485. Expansion – mini PCI Express (shared with mSATA support) Power Supply – 12V DC power jack. Battery […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on VIA Introduces AMOS-3005 Fanless Rugged Computer with Eden X4 x86 Processor, and VX11 Media Processor

VIA Introduces AMOS-3005 Fanless Rugged Computer with Eden X4 x86 Processor, and VX11 Media Processor

VIA Embedded Store has just sent a newsletter to announce the launch of the company’s latest rugged embedded computer, AMOS-3005, powered by VIA Eden X4 processor and VX11 media processor and chipset, supporting temperature ranges from -10°C to 60°C, and featuring a flexible 9V-36V DC input. AMOS-3005 specifications: Processor –  VIA Eden X4 quad core 64-bit x86 processor @ 1.2 GHz (NanoBGA2 package) with 2MB L2 cache, 1066 MHz front side bus Chipset – VIA VX11 Media System Processor with an integrated VIA Chrome 640/645 graphics processor supporting DirectX 11, and OpenCL, as well as a VIA ChromotionHD 5.0 video engine supporting dual 1080p HD decoding of H.264, MPEG-2, WMV9, and VC-1 codecs. System Memory – 1x DDR3 1333 SDRAM SODIMM socket (Up to 8GB memory size) Storage – 1x mSATA slot, 32Mbit Flash memory for AMI BIOS. Video Output- 1x HDMI, 1x VGA up to 2048×1536, with dual independent […]

Exit mobile version