IoT News - Page 84 of 163 - CNX Software

November 19, 2018November 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

PyGo Wearable Devices Create LoRa Mesh Networks (Crowdfunding)

Pycom has made some interesting IoT boards running MicroPython in the past starting with WiFi capable WiPy in 2015, and followed by various others supporting various wireless standard including Bluetooth, LoRa, Sigfox, and NB-IoT with LoPy and Fipy. The company launched all their boards via crowdfunding campaigns, and they are now back on Kickstarter for their PyGo plug-n-play wearable devices creating PyMesh networks with up to 12km range between nodes, and managed using Pylife mobile app. Typical use cases include basic connectivity (e.g. messaging) in remote areas without cellular access, and assets / pets / kids location tracking, There are two version of PyGo: PyGo1 with mesh networking only, and PyGo2 that adds cellular network access. Pygo hardware specifications: SoC – Espressif Systems ESP32 dual core WiFi 4 + BLE SoC System Memory – 64 Mbit (8MB) RAM Storage – 8MB flash Display – 128×36 OLED display Connectivity PyMesh up […]

November 19, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Ubuntu 18.04 To Get 10 Years Long Term Support

Canonical releases new Ubuntu versions every six months, but most of those are then supported for 9 months only. If you want long term support, you need to install the LTS (Long Term Support) version released every two years such as Ubuntu 16.04 or Ubuntu 18.04 which are supported (for free) for 5 years. If for whatever reasons you cannot or do not want to update after 5 years, the system will not get any security fixes, unless you purchase a Ubuntu Advantage subscription with Extended Security Maintenance, which allows you for example to run a fully supported Ubuntu 12.04 (Server) until April 2020 (8-year support). But this will change for the better, as ZDNet reports that Mark Shuttleworth told the audience at a keynote at the OpenStack Summit in Berlin that Ubuntu 18.04 support will be extended from 5 years to 10 years “In part because of the very […]

November 17, 2018November 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Allwize K2 IoT Board Supports 169MHz Wize LPWAN Protocol (LoRa alternative)

LoRa, Sigfox, and NB-IoT are probably the most popular low power long range wireless protocols for the Internet of Things, but there are several others, including one I had never heard of: Wize. The Wize Low Power Wide Area Network (LPWAN) protocol has been created in late 2017, leverages the “old and refurbished” 169 MHz frequency, support up to 20 km range, 20-year battery life, and is managed by the Wize Alliance with members including STMicroelectronics, Suez, Sagecom, Renesas, Analog Devices, Silicon Labs and many others. Despite being a recent protocol, the table below claims 3 millions of deployment for Wize, and showcases some of differences against LoRa, NB-IoT, and Sigfox. You may be confused as how the standard was created in at the end of 2017, but there are so many deployments, and 13 years experience. It appears Wize is derived from the older EN 13757 standard for gas […]

November 16, 2018November 16, 2018 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Intrinsyc Open-Q 605 SBC is Powered by Qualcomm QCS605 IoT Processor

Qualcomm QCS603 / QCS605 “Internet of Things” processors were announced last spring as the first “Qualcomm Vision Intelligence Platforms” from the company and designed for artificial intelligence and computer vision applications. Both SoCs are octa-core processor with two performance Kryo 300 Gold cores, and six efficiency Kryo 300 Silver cores, but QCS605’s big cores are clocked at a higher 2.5 GHz frequency, and the processor comes with better 802.11ac Wave2 WiFi, support for up to 32MB camera, and 4K video capture. However so far, there was no development platform publicly available, and this has just changed with Intrinsyc announcing Open-Q 605 single board computer (SBC) and development kit featuring Qualcomm QCS605 vision intelligence platform. Open-Q™ 605 SBC Specifications SoC – Qualcomm QCS605 octa-core processor with 2x high-performance Kryo 300 Gold cores up to 2.5 GHz, 6x low-power Kryo 300 Silver cores up to 1.7 GHz, Hexagon 685 DSP with Hexagon vector […]

November 15, 2018November 16, 2018 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Arduino PRO Gateway for LoRa Features Raspberry Pi 3 Board

Arduino has just introduced the Arduino PRO Gateway for LoRa based on Raspberry Pi 3 development board, a LoRa gateway mPCIe module, and a metal enclosure. The strange thing about this product is that it does not feature any Arduino MCU, so why did Arduino design it? That’s because it works as a LoRa gateway for their Arduino MKR WAN 1300 IoT nodes. The gateway is sold as a kit with a LoRa gateway Embit EMB-LR1301-mPCIe card with SX1301 baseband chipset, an adapter for Raspberry Pi, an aluminum enclosure, a Raspberry Pi 3 model B+, a 5V power supply, an Ethernet cable, and an external antenna. Specifications for the LoRa part of the gateway: Chipset – Semtech SX1301 Modulation – LoRa Spread Spectrum, FSK, GFSK 868MHz (EU) / 915MHz (US) Number of Channels – 8 LoRa Channels Operating Frequency – 868MHz (EU) / 915MHz (US) Frequency Range – 860MHz to 1020MHz Operating […]

November 9, 2018November 11, 2018 by Jean-Luc Aufranc (CNXSoft) - 76 Comments

Giveaway Week – ThaiEasyElec 3G Raspberry Pi HAT

3G-GPS-Tracker-Raspberry-Pi-Board-Configuration

You’ll need a 40-pin Raspberry Pi board for this giveaway. Quectel UC20 based ThaiEasyElec 3G Raspberry Pi HAT adds 3G / 2G connectivity to the popular development board. I”l send the board with the full kit include GPS/GLONASS antenna, cellular antenna, headers and spacers. I explained how to use the board in “How to Use 3G and GPS on Raspberry Pi” post, and I found that it was pretty easy working with GPS and 3G using Hologram SIM card by following the instructions provided by ThaiEasyElec. I could also find alternative connection method for this type of board on the Internet. To enter the draw simply leave a comment below. Other rules are as follows: Only one entry per contest. I will filter out entries with the same IP and/or email address. Contests are open for 48 hours starting at 10am (Bangkok time) every day. Comments will be closed after […]

November 6, 2018November 6, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

ModBerry M2000 Industrial Computer Features UP Squared Apollo Lake Board

TECHBASE has been providing DIN rail mountable Arm and x86 based Modberry industrial computers / IoT gateways for several years. The company has now upgraded ModBerry M1000 model with an Intel Cherry Trail UP board to ModBerry M2000 computer featuring AAEON UP Squared board powered by either an Intel Celeron N3350 dual core processor, or Pentium N4200 quad core processor, both part of Intel’s Apollo Lake family. ModBerry M2000 specifications: SoC (one or other other) Intel Celeron N3350 dual core processor @ 1.10 / 2.40 GHz with Intel HD Graphics 500; 6W TDP Intel Pentium N4200 quad core processor @ 1.10 / 2.50 GHz with Intel HD Graphics 505; 6W TDP System Memory – 2, 4, or 8GB RAM Storage – 16, 32, 64, or 128GB eMMC flash, SATA connector and M.2 SATA socket Video Output – 1x HDMI Connectivity – 2x Gigabit Ethernet, with optional LTE/3G, WiFi, ZigBee, LoRa, […]

October 29, 2018February 8, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

96Boards IoT Edition IVY5661 Board Features UniSoC UWP5661 WiFi 5 + Bluetooth 5 SoC

If you ever wanted to start a new IoT project with WiFi and Bluetooth connectivity, you’d like think about using Espressif ESP32 WiSoC that supports single band 802.11 b/g/n WiFi (WiFi 4) and Bluetooth 4.2 LE thanks to great community and software support on top of the ultra low cost of the solution. But in case your require 802.11ac (WiFI 5) – yes, I’m trying hard to get used to the new WiFi naming scheme for consumers -, or Bluetooth 5, Espressif Systems does not offer such solution yet. Instead you may consider UniSoC UWP5661 Arm Cortex-M4 WiSoC with WiFi 5 & Bluetooth 5 connectivity that will be found in the soon-to-be-launched UcRobotics IVY5661 96Boards IoT Edition board. I could not find lots of information about UWP5661 chip tself, so let’s jump directly to IVY5661 board specifications: SoC – UniSoC UWP5661 dual core Arm Cortex-M4 microcontroller @ 416 MHz manufactured […]