Linux News - Page 166 of 431 - CNX Software

November 3, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

BOOTPRINT X2 96Boards AIoT Development Kit Features Sunrise 2.0 AI Processor

Horizon Robotics BOOTPRINT X2 is an AIoT / AI computing development kit providing a complete reference solution from device to cloud integration. The board is powered by the company’s Sunrise 2.0 AI edge processor based on the second-generation BPU (“Brain Processing Unit”) architecture that delivers up to 4 TOPS at low power consumption and is said to follow 96Boards specification, although from the photo below they’ve taken some liberties with the option (e.g. added a Gigabit Ethernet port). The board has now launched yet, and we have limited information about BOOTPRINT X2 kit specifications: SoC – Horizon Sunrise 2.0 AI edge processor with 4 TOPS equivalent AI processing power (no mention of architecture) System Memory – 1GB LPDDR4 RAM Storage – 4GB eMMC flash, MicroSD card socket Connectivity – Gigabit Ethernet Camera I/F – Dual 1080p camera inputs for symmetric binocular camera, combination of infrared and visible light. Audio – […]

October 31, 2019 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Olimex OSHW Allwinner S3 IP Camera Board in the Works – Feedback & Suggestions Welcomed

Allwinner S3 Arm Cortex-A7 processor is designed for dual-camera systems and embeds 128MB RAM. It looks to be an evolution of the older Allwinner V3s chip that came with 64MB RAM and is software-compatible with the older camera SoC. We reported about the new processor and an Allwinner S3 development board last year, but Olimex has started working on an open-source hardware IP camera board based on the processor and is asking for feedback from customers and the community at large. Preliminary specifications: SoC – Allwinner S3 Cortex-A7 @ 1.2GHz with 128MB DDR3 RAM at 1333 MHz Storage -MicroSD card slot, configuration EEPROM, optional NAND/eMMC/SPI Flash on socket Camera I/F MIPI camera connector with RPi pinout Parallel CSI camera connector Display – LCD connector for LCD-OLinuXino 4.3″ to 15.6″ displays Audio – Audio in and out via 3.5mm audio jacks Connectivity Fast Ethernet with PoE option WiFi / BT module with […]

October 28, 2019February 29, 2020 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

NanoPi M4V2 Kit Review – Part 2: FriendlyCore Desktop

We’ve already seen how to assemble NanoPi M4V2 metal case kit which offers an Arm mini PC solution with support for NVMe SSD. The new NanoPi M4V2 Rockchip RK3399 SBC is an evolution of the M4 board that brings faster LPDDR4 memory and adds power & recovery buttons. Since we’ve already tested several RK3399 SBC‘s and TV boxes, I planned to focus the review on thermal design evaluation (i.e. see how well the board cools), and see how memory bandwidth evolved from LPDDR3 to LPDDR4. I wanted to do so both with Linux and Android, since I could compare NanoPC-T4 (LPDDR3) benchmarks in Android. But this requires an eMMC flash module, and I don’t own any. So instead I planned to run Armbian because of support for armbian-monitor for nice temperature chart but it’s not working just yet, so instead I’ve done all tests with FriendlyCore Desktop (rk3399-sd-friendlydesktop-bionic-4.4-arm64-20190926.img) based on […]

October 25, 2019 by Stephen Vicinanza - 2 Comments

STEEReoCAM is a 3D Stereo Camera for NVIDIA Jetson Nano, TX2, & AGX Xavier Dev Kits

STEEReoCam 2MP 3D Stereo Camera The latest e-con systems camera added to the lineup is the STEEReoCam. A 2MP 3D MIPI compliant stereo camera that works with the NVIDIA Jetson Nano, AGX Xavier, and Jetson TX2 development kits. Improved Overall Function The camera has greater accuracy and depth range, with an OmniVision 1/2.9″ OV2311 global shutter CMOS sensor. And the STEEReoCam comes bundled with CUDA the proprietary accelerated stereo SDK, that uses the GPU in the NVIDIA Tegra processors. AI and IoT Applications The camera is targeted towards depth sensing, AVG, robotics, face and gesture recognition, drones, medical procedure robots, and embedded visions. Software Development Kit e-Con Systems provides a Software Development Kit (SDK) package for the camera designed to work with NVIDIA Jetson development boards. The SDK is built on OpenCV 3.4.2 and CUDA Compute Capability 5.3/7.2/6.2. Sample Linux applications, some of which are shown in the video […]

October 24, 2019 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Orange Pi AI Stick Lite $20 Neural Compute Stick Ships with Free Training Tools

Shenzhen Xunlong Software launched Orange Pi AI Stick 2801 neural compute stick last year for $69. It was interesting as an alternative to Intel Neural Compute Stick. But once the documentation and SDK were released a few days later we discovered you could only run demos with the stick for that price, and the training tools would cost an extra $149. The excellent news is that the company has now launched an updated, yet similar Orange Pi AI Stick Lite for just $19.99, and best of all the PLAI training tools are now entirely free. Orange Pi AI Stick Lite specifications: ASIC – Gyrfalcon SPR2801S Lightspeeur series processor with 2-dimensional Matrix Processing Engine (MPE) with AI Processing in Memory (APiM) delivering up to 2.8TOPS @ 300mW, 5.6 TOPS @ 100 MHz (peak performance) Storage – eMMC 4.5 flash with 68 MB/s read, 84.69 MB/s write Host interface – USB 3.0/2.0 […]

October 23, 2019October 23, 2019 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

GIGABYTE GA-PICO3350 Apollo Lake Pico-ITX Board Comes with SO-DIMM RAM Slot, SATA and mSATA Storage

GIGABYTE GA-PICO3350 may be the smallest motherboard from the company so far. The Pico-ITX board comes with an Intel Celeron N3350 dual-core Apollo Lake processor with a SO-DIMM slot, SATA port, and mSATA socket that give you more options will selecting RAM and storage. GA-PICO3350 specifications: SoC – Intel Celeron N3350 dual-core Apollo Lake processor @ up to 2.4 GHz with 2 MB cache, Intel HD graphics; 6W TDP System Memory – 1 x DDR3L SO-DIMM socket supporting up to 8 GB DDR3L 1866/1600 MHz Storage- 1x SATA 6Gb/s connector, 1x mSATA connector (multiplexed with mPCIe), 128 Mbit flash for BIOS/UEFI Video Output HDMI 1.4 up to 3840×2160 @ 30 Hz 1x LVDS header 1x flat panel display header Audio – Realtek ALC887 codec, 1x front panel audio header Connectivity – Gigabit Ethernet port via Realtek PHY USB – 2x USB 3.0/2.0 ports on the back panel, 2x USB 2.0/1.1 […]

October 22, 2019 by Jean-Luc Aufranc (CNXSoft) - No Comments

SolidRun ClearFog GTR A385 NVR Platforms Feature Up to 8 Gigabit Ethernet PoE Ports

A Networking Video Recorder (NVR) is designed to record and playback videos from multiple IP cameras usually connected over Ethernet, and in many cases powered over Ethernet (PoE). The main purpose is for security applications allowing caretakers to monitor multiple cameras at the same time on a mosaic screen. There are plenty of turnkey NVR solutions on the market, but SoliRun, an embedded systems company known for its modules and single board computers, recently introduced the ClearFog GTR A385 family that supports up to eight PoE/PoE+ Gigabit Ethernet Ports. The ClearFog GTR A385 family currently includes two modules with GTR S4 supporting up to four cameras, and GTR L8 up to eight cameras. Specifications: SoC – Marvell ARMADA A385 dual-core Armv7 (Cortex A9 class) up to 1.3Ghz System Memory – Up to 2GB on-board DDR3L Storage – 8GB eMMC flash (default), 2x 7 pin SATA (optional replacement for 2 x […]

October 21, 2019October 21, 2019 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Linux on DeX Won’t Be Available on Android 10 as Samsung Scraps the Initiative

Desktop mobile convergence was talked a lot a few years with the hope that smartphones would eventually be used as a phone while on the go, and an efficient desktop or laptop replacement at the office or the home. Canonical was heavily involved in making convergence happen with Ubuntu Touch, but over two years ago they eventually had to drop all development efforts focusing on IoT and the Cloud instead. Samsung came up with its own Linux on Galaxy offering in 2017, which officially launched as Linux on Dex beta nearly a year ago, and allowed users, mostly developers, to run a Linux Desktop while their Samsung Android smartphone was connected to a monitor. Linux on Dex is Dead This looked promising, but Android Police reports some beta users received an email from Samsung explaining that the beta program had ended and that Linux on DeX will not be supported […]