Linux News - Page 178 of 454 - CNX Software

March 18, 2020March 18, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

reMarkable 2 is a $399 e-Paper Tablet with Pressure Sensitive Pen

reMarkable digital notepad and e-reader was unveiled in 2016, and designed to feel like using actual paper sheets. The device came with a single-core Cortex-A9 processor, a 10.3″ E-Ink display with 1872×1404 resolution, and WiFi connectivity to backup your notes and/or drawings to the cloud or mobile phone. The company is now back with reMarkable 2 e-Paper tablet equipped with a faster and more efficient dual-core Cortex-A7 processor, 1GB RAM, a second-generation CANVAS 10.3″ e-Paper display with the same 1872×1404 resolution but lower latency. The second-generation e-Paper tablet also benefits from a thinner design and much-improved battery life. reMarkable 2 specifications: SoC – Dual-core Arm processor @ 1.2 GHz (possibly NXP i.MX 7Dual processor) System Memory – 1GB LPDDR3 RAM Storage – 8GB internal storage good for around 100,000 pages Display – 10.3″ monochrome digital paper “CANVAS” capacitive touch display partially based on E-Ink Carta technology with 1872×1404 resolution (226 […]

March 17, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

DFI GHF51 Ryzen Embedded R1000 SBC is about the Size of a Raspberry Pi

We’ve seen a fair amount of AMD Ryzen Embedded boards over the last few months including 3.5″ Ryzen Embedded SBC‘s such as Kontron SBC-VR1000 and IBASE Technology IB918, as well as larger boards such as SAPPHIRE FS-FP5R 5×5 motherboard. The most compact Ryzen Embedded board we covered so far must have been the upcoming Sapphire NP-FP5 based on Ryzen R1305G processor with a 4″x4″ (10.16 x 10.16 cm) form factor. But DFI GHF51 1.8″ SBC takes the crown of the smallest Ryzen Embedded SBC, with the business card / Raspberry Pi sized board measuring just 84 x 55 mm, and featuring an AMD Ryzen Embedded R1000-series processor combined with up to 8GB RAM. DFI GHF51 specifications: SoC – AMD Ryzen Embedded R1000 Series with Radeon Vega 3 GPU; 12W CPU System Memory – 2GB/4GB/8GB single-channel DDR4 3200MHz Storage 1x 16GB/32GB/64GB eMMC flash 64Mbit SPI Flash for BIOS (supports UEFI boot […]

March 12, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

FriendlyELEC SOM-RK3399V2 CPU Module Gets 4GB LPDDR4 RAM Upgrade

Last year, FriendlyELEC launched SOM-RK3399 system-on-module (SoM) powered by Rockchip RK3399 hexa-core processor combined with 2GB DDR3 memory, 16to 64GB flash, and a built-in WiFi 5 module. Contrary to most SoM’s on the market, SOM-RK3399 could work in standalone mode thanks to two USB-C ports, although it could also be integrated into a carrier board to create a complete development board with more ports and interfaces. The company has now introduced an update with SOM-RK3399V2 CPU module with 4GB LPDDR4 RAM, as well as a small change in the layout for the LED’s and buttons, but the rest of the features remain the same. The company also appears to have changed the way they handle cooling with SOM-RK3399V2 shipping with a heatsink, while SOM-RK3399 cooling was handled by a heatsink + cooling connected to the carrier board. SOM-RK3399V2 specifications: SoC – Rockchip RK3399 big.LITTLE hexa-core processor with 2x Cortex-A72 cores […]

March 9, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Thundercomm Announces Qualcomm based Modules for Smart Speakers, LTE IoT, Smart Retail, and 5G Applications

Based in California in the US, Thundercomm Technology Co., Ltd. (aka Thundercomm) is a provider of IoT products & technologies for OEM/ODMs, enterprises and developers. The company introduced several Qualcomm based “TurboX Systems-on-Module” for smart speakers, LPWAN IoT devices with NB-IoT and LTE Cat M1 connectivity, smart retail applications, and 5G powered devices. TurboX C404 and C405 SOMs for Smart Speakers and Soundbars Key features and specifications: SoC – Qualcomm Snapdragon C404 / C405 with CPU – Quad-core Arm Cortex-A53 @, 1.4 GHz GPU (C405 Only) – Qualcomm Adreno 306 GPU @ 600 MHz DSP -2x Hexagon QDSP6 v66 – Low Power Audio Subsystem & Audio Compute DSP System Memory & Storage – 1GB LPDDR3 + 8GB eMMC flash in eMCP package; SD card signals Connectivity 2×2 MIMO WiFI 5 802.11 a/b/g/ac + Bluetooth 5.0 + FM via WCN3999 Gigabit Ethernet (RGMII) Display Interfaces (C405 Only) 4-lane MIPI DSI port […]

March 7, 2020 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Raspberry Pi or UP Board based Linutop Runs Digital Signage or Web Kiosk Software

Linutop is a French company offering software and hardware solutions for digital signage and secure web kiosks, and this morning we received an email about Linutop OS now working on Raspberry Pi 4 board. Linutop OS is a Xubuntu (x86) or Raspbian (Arm) based OS using XFCE desktop environment, and shipping with the company’s Linutop Kiosk program used to setup a web kiosk or a digital signage player controlled via Linutop TV Digital Signage CMS (Cloud or self-hosted). The kiosk/DS software and the content management system (CMS) are not open-source, but there are free demo versions. If you want to install the full version it will cost you 79 Euros, and a self-hosted license for the CMS goes for 196 Euros. The company also offers Arm and x86 digital signage players based on Raspberry Pi or UP Board SBCs. Linutop XS/XS3 Linutop XS is based on a Raspberry Pi 2 […]

March 6, 2020July 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Newport GW6903 is a Compact Marvell Octeon TX SBC with Gigabit Ethernet, Dual mPCIe, and USB 3.0

Gateworks introduced its Newport SBC family powered by Cavium Octeon TX processors and designed for networking applications in 2017. One of those boards was a compact SBC with one Gigabit Ethernet port, an mPCIe socket, and a USB 2.0 Type-C port. The company has now launched Newport GW6903 SBC with the same 100x35mm form factor but with one Gigabit Ethernet port, two mPCIe sockets, and a faster USB 3.0 Type-A port. Newport GW6903 specifications: SoC – Cavium Marvell Octeon TX CN8120 dual-core Armv8 processor @ 800 MHz or Octeon TX CN8130 quad-core ARMv8 processor @ 1.5 GHz System Memory – 1GB DDR4 SDRAM (Option up to 4GB) Storage – 8GB eMMC flash (Option up to 64GB), serial configuration EEPROM Networking – Gigabit Ethernet Port with Passive PoE Support GNSS – Optional Ublox ZOE-MQ8 GNSS GPS Receiver with PPS support USB – USB 3.0 Type-A host port Expansion 2x Half Card […]

March 5, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

TRITON-TX8M i.MX8M Mini / Nano Modules & Devkits Support Linux, Windows 10 IoT Core, and (Soon) QNX 7.0

UK-based Direct Insight has recently unveiled TRITON-TX8M system-on-module (SoM) powered by NXP i.MX 8M Mini or Nano processor, coupled with up to 2048MB DDR3L and a 4GB eMMC flash. The tiny (68 x 26 mm) SODIMM module is pin-compatible with the company’s earlier TRITON-TX i.MX6 / i.MX8 module family, and currently support Linux and Windows 10 IoT Core, with a QNX 7.0 BSP in the works. TRITON-TX8M SoM specifications: SoC TRITON-TX8MM – NXP i.MX8M Mini Quad 4x Arm Cortex-A53 processor @ 1.6 GHz with real-time Cortex-M4F core, Vivante GC NanoUltra 3D GPU + GC320 2D GPU, 1080p VPU TRITON-TX8MN – NXP i.MX8M Nano Dual 2x Arm Cortex-A53 processor @ 1.4 GHz with real-time Cortex-M7 core, Vivante GC7000UL GPU with OpenGLES 3.0, OpenCL and Vulkan support System Memory – 512MB, 1GB, or 2GB RAM Storage – 4GB eMMC flash 200-pin SODIMM200 edge connector with Storage – 2x SD Card/SDIO Display – […]

March 3, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Congatec conga-SMC1 3.5″ Carrier Board is Designed for NXP i.MX8 SMARC Modules

3.5-inch carrier board with NXP i.MX8 SMARC Module

Last year, Congatec introduced SMARC 2.0 compliant systems-on-modules based on NXP i.MX 8, i.MX 8M Mini and i.MX 8M Nano processors, together with Conga-SEVAL carrier board designed for evaluation and early software development, but is not suitable for deployment in the field. The company has now unveiled a standard 3.5″ carrier board – conga-SMC1 – that takes any of the company’s i.MX8 SMAC modules, in order to help their customers bring products faster to market thanks to a commercial-off-the-shelf (COTS) board. Congatec conga-SMC1/SMARC-ARM carrier board features and specifications: Supported SoM – conga-SMX8 (i.MX8), conga-SMX8-Mini (i.MX 8M Mini), or conga-SMX8-Nano (i.MX 8M Nano). Future SMARC 2.0 Arm-based modules should also be supported Storage – 1x SATA III (support of SATADOM VCC PIN 7 and PIN 8), 1x SATA power (+5V, +12V), MicroSD card socket, M.2 NVMe SSD support Display Interface 1x LVDS 18/24bit single/dual channel LVDS 2x optional eDP/DSI (dependent on […]