Linux News - Page 198 of 434 - CNX Software

October 12, 2018October 12, 2018 by Jean-Luc Aufranc (CNXSoft) - 67 Comments

La Frite Amlogic S805X Board Runs Mainline Linux, Goes for $5 and Up (Crowdfunding)

Libre Computer first started with their AML-S905X-CC (aka Le Potato) board powered by Amlogic S905X processor last year, and they’ve since then launched several other boards based on Allwinner or Rockchip processor. But their latest “La Frite” board – also known as AML-S805X-AC – is an even lower cost version of the “Le Potato” board, with an Amlogic S805X processor limited to 1080p60 output and video decoding, a smaller footprint based on the one for Raspberry Pi Model A+, and price starting at just $5 on Kickstarter. AML-S805X-AC “La Frite” board specifications: SoC – Amlogic S805X quad core ARM Cortex-A53 processor @ 1.2 GHz with penta core ARM Mali-450MP GPU @ 650 MHz, and Amlogic Video Engine 10 System Memory – 512 MB or 1GB DDR4 @ 2400 MHz Storage – eMMC module connector, 128 Mb SPI NOR flash Video & Audio Output – HDMI 2.0 port Video Codecs Decoding […]

October 11, 2018 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

THEC64 Mini Small Commodore C64 Replica is Now for Sale for $80

Mini versions of retro computers and game consoles are now really a thing. After Nintendo NES Classic / SNES Classic, and Sony PlayStation Classic announcement, all of which are smaller versions of popular older consoles with modern interface like HDMI, Retro Games has now unveiled THEC64 Mini (apparently no typo) that is a small scale replica – half size to be exact – of Commodore C64 computer launched in 1982. THEC64 mini specifications based on Sunxi Wiki and official product page: SoC – Allwinner A20 dual core Cortex-A7 procesor System Memory – 512MB DDR3 Storage – TBD NAND flash Video Output – HDMI 1.4 output at 720p USB – 2x USB 2.0 host ports Misc – Power button Power Supply – 5V/1A via micro USB port Dimensions – 205 x 105 x 35mm You may notice a keyboard on the photo, but that’s just for aesthetics, as the keys are […]

October 5, 2018October 11, 2018 by Ian W MORRISON (Linuxium) - 10 Comments

Beelink X55 Review – An Intel Gemini Lake mini PC Tested with Windows 10 and Linux

The Beelink X55 is very similar in style to Intel’s NUC7PJYH NUC reviewed earlier except that it is not a kit but a fully functional Windows mini PC. It is physically small consisting of an approximately 4.5″ by 4” case about 1¾” tall with a front panel that includes the power button and a couple of USB ports and a headphone jack with the rest of the ports including two HDMI (2.0) ones at the rear: The specifications include: The key highlights are that the Beelink X55 comes a 128GB mSATA SSD with pre-installed Windows 10 Home together with 8GB DDR4 RAM (soldered and is non-expandable) and space plus a connector for an SSD. Starting with a quick look at the hardware information shows it is mostly aligned to the specification but see the note below about the memory: As usual I ran my standard set of benchmarking tools to […]

October 4, 2018June 29, 2020 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Texas Instruments To Finally Launch a 64-bit Processor with AM654 SoC

Texas Instruments has a wide portfolio of Arm-based processors targeting industrial control with their Sitara family. So all their models, including the latest Sitara AM57x family, were based on 32-bit Arm cores. But a somewhat recent Linux mainline kernel commit reveals the company has been working on a 64-bit Arm processor family, namely AM65x family, and one the first processor will be TI AM654 “Keystone III” quad-core Arm Cortex-A53 + dual lockstep Cortex-R5F processor. The AM654 SoC is said to be a lead device of the K3 multicore SoC architecture targeting both the broad market and industrial control. Some of the key features and specifications include: CPU – Quad ARMv8 A53 cores split over two clusters GPU – PowerVR SGX544 GICv3 compliant GIC500 Configurable L3 Cache and IO-coherent architecture Dual lock-step capable R5F uC for safety-critical applications High data throughput capable distributed DMA architecture under NAVSS 3x Gigabit Industrial Communication […]

September 26, 2018September 28, 2018 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

Baikal T1 MIPS Processor – The Last of the Mohicans?

CNXSoft: Guest post by Blu about Baikal T1 development board and SoC, potentially one of the last MIPS consumer grade platforms ever. It took me a long time to start writing this article, even though I had been poking at the test subject for months, and I felt during that time that there were findings worth sharing with fellow embedded devs. What was holding me back was the thought that I might be seeing one of the last consumer-grade specimen of a paramount ISA that once turned upside-down the CPU world. That thought was giving me mixed feelings of part sadness, part hesitation ‒ to not do some injustice to a possibly last-of-its-kind device. So it was with these feelings that I took to writing this article. But first, a short personal story. Two winters ago I was talking to a friend of mine over beers. We were discussing CPU […]

September 23, 2018June 29, 2020 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Realtek RTD1296 U-boot & Linux Source Code Released, RTD1619 Cortex A55 SoC Shows up in Code

Media centers based on Realtek RTD1295 or RTD1296 processors have been around for a few years. They usually run both Android and OpenWrt operating systems for respectively media functions (4K video playback, HDMI input recording…), and NAS functions like file sharing. media downloads, etc…. SinoVoIP also unveiled Banana Pi BPI-W2 board powered by RTD1296 last year, but so far I was not aware of any source code for the target. Synlogy actually released a Linux 4.4 tarball a while ago, but more recently SinoVoIP released Linux 4.9.119 and U-boot source code for RTD1296 in Github. You’ll find instructions to build from source, and flash the resulting U-boot and Kernel image from the Github page. There’s also some mainline Linux support for RTD1295, but maybe this release will help further speed up mainline support. Beside code for RTD129x (RTD1295/RTD1296), we’ll find references to RTD139x (RTD1395) a cost-down version of RTD1295, as […]

September 15, 2018 by Ian W MORRISON (Linuxium) - 2 Comments

Beelink X45 Mini PC Review with Windows 10 and Ubuntu 16.04/18.04

The Beelink X45 mini PC is now available, and Lightinthebox.com have provided a unit for review. It is very similar in style to Intel’s latest NUC Windows mini PC, the NUC7CJYSAL reviewed earlier. However it contains an Intel Celeron Processor J4105 SoC which is a quad core processor bursting up to 2.50 GHz together with the Intel UHD Graphics 600 processor that is capable of 4K support at 60Hz. It is physically small consisting of an approximately 4.5″ by 4” case about 1¾” tall with a front panel that includes the power button and a couple of USB ports and a headphone jack with the rest of the ports including two HDMI (2.0) ones at the rear: The specifications include: A key point to note is the Beelink X45 comes with 64GB eMMC with pre-installed Windows 10 Home together with 4GB DDR4 RAM (soldered and is non-expandable) with space and […]

September 9, 2018September 9, 2018 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Khadas is Working on more RK3399 / RK3399Pro Boards, Projector Development Kit, AR Kit

Shenzhen Wesion had already unveiled their Khadas Edge board that works both as a system-on-module and a standalone SBC thanks to an MXM3 connector on one side, and traditional HDMI and USB ports on the other. The Rockchip RK3399 board will be launched on Indiegogo a little later. But the company is working on a few more boards and development kits all based on Rockchip RK3399 or the upcoming RK3399Pro processor with neural processing unit (NPU) for AI workloads acceleration. First we have Khadas Edge-V, very similar to Khadas Edge but with a 40-pin IO header replacing the MXM3 connector, and following Khadas VIM form factor and ports, so for example we get an Ethernet port as well as an extra USB 3.0 port instead of USB 2.0 on Edge. As mentioned in Khadas Edge announcement, the company is also working on Khadas Captain carrier board with MXM3 socket. So we […]