Linux

Posted on by Jean-Luc Aufranc (CNXSoft) - 22 Comments on Roqos Core AC Router Runs Debian on Intel Atom Bay Trail-I Processor for $19… Plus Monthly Subscriptions

Roqos Core AC Router Runs Debian on Intel Atom Bay Trail-I Processor for $19… Plus Monthly Subscriptions

Roqos Core router is interesting on several front. First it’s quite powerful and features-rich with an Intel Atom E3845 processor, five Gigabit Ethernet ports, 802.11ac WiFi, a USB 3.0 port, and even an HDMI port allowing you to use it as a Media Center too. It should also be quite customizable, software wise, since it runs Debian, and finally the business model is also different, as you only need to pay $19 for the router, with the catch that you need to subscribe Roqos Service with “advanced cybersecurity and parental control features” for $17 per month for at least 12 months, bringing the total to $223. After one year, you can opt out of the cloud service, and continue to use the router without the extra security features. Roqos Core RC10 router hardware specifications: SoC – Intel Atom Bay Trail-T E3845 quad core processor @ up to 1.91 GHz (10W […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 48 Comments on Marvell ESPRESSOBin Board with Gigabit Ethernet, SATA, mini PCIe, and USB 3.0 To Launch for $39 and Up (Crowdfunding)

Marvell ESPRESSOBin Board with Gigabit Ethernet, SATA, mini PCIe, and USB 3.0 To Launch for $39 and Up (Crowdfunding)

I can often read people hoping for an inexpensive community board for network, storage and connectivity applications with high speed interface like SATA, multiple Gigabit Ethernet port, USB 3.0 and/or mini PCIe, and that’s exactly what Globalscale Technologies is about to offer with their Marvell ARMADA 3700 based ESPRESSOBin development board to go for $39 and up via Kickstarter. Marvell ESPRESSOBin board specifications: SoC – Marvell Armada 3700LP (88F3720) dual core ARM Cortex A53 processor up to 1.2GHz System Memory – 512MB DDR3 or optional 1GB DDR3 Storage – 1x SATA interface, 1x micro SD card slot with footprint for an optional 4GB EMMC Network Connectivity 1x Topaz Networking Switch 2x GbE Ethernet LAN 1x  Ethernet WAN 1x MiniPCIe slot for Wireless/BLE periphereals USB – 1x USB 3.0, 1x USB 2.0, 1x micro USB port Expansion – 2x 46-pin GPIO headers for accessories and shields with I2C, GPIOs, PWM, UART, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 21 Comments on Report: Linux Cannot Be Installed on Microsoft Signature Edition PCs, Laptops and Tablets

Report: Linux Cannot Be Installed on Microsoft Signature Edition PCs, Laptops and Tablets

Microsoft Signature program is designed to make sure certified devices offer the best possible experience for users, as they can not come with bloatware, include Windows Defender, and must meet strict hardware requirements. However according to a Phoronix report, “providing the best possible user experience” also includes blocking installation of alternative operating systems such as Ubuntu, Debian, or other Linux distributions. The issue was discovered by rijesh who attempted to install Ubuntu 16.04 on his Microsoft Signature Edition Lenovo Yoga 900 13-ISK2 laptop, and noticed that while the BIOS and Windows 10 could see his 512 GB hard drive, Ubuntu was unable to find it, and a customer support representative answered that: This system has a Signature Edition of Windows 10 Home installed. It is locked per our agreement with Microsoft. Another user reports having successfully installed Ubuntu 16.04 on his Lenovo YOGA 900-13ISK, so the devil is in the […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on HICAT.Livera Machine Vision Board and Robot Kit Feature HiSilicon Hi3518 SoC (Crowdfunding)

HICAT.Livera Machine Vision Board and Robot Kit Feature HiSilicon Hi3518 SoC (Crowdfunding)

HiSilicon Hi3518 ARM9 processor is mostly being used in IP cameras, but Hicat startup decided to combined the camera processor with an Atmel MCU and a MT7601 WiFi module to create a wireless camera board to be used with OpenCV, and even provide a complete affordable robot kit with the board. Hicat.livera board specifications: Vision Core – Hisilicon Hi3518 ARM9 processor @ 440 MHz Storage – 16MB flash + micro SD card MCU – Atmel ATmega32U4 AVR micro-controller Connectivity – 802.11 b/g/n WiFi via Mediatek MT7601 module + u.FL antenna connector Camera interface with provided 140 deg. camera using Omnivision OV9712 720p (1280×720) sensor USB – 1x micro USB port for power and programming Audio – Built-in microphone, speaker header Sensors – MPU6050 accelerometer and gyro Expansion – 2x GPIO headers with GPIOs, I2C, SPI, serial, PWM, digital, analog and power signals. Misc – MCU reset and Linux reset buttons, […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 51 Comments on Orange Pi One Development Board Sells for $3.69 Shipped (Promo)

Orange Pi One Development Board Sells for $3.69 Shipped (Promo)

[Update: Sorry the promo is over, and price is back at $13.79] Last time, we had a promo for Orange Pi PC for $8.57 on GearBest, and it was legit, but quantity limited, so not so easy to get. There’s now another promo from the same parent company, as Orange Pi One is sold for $3.69 including shipping on Everbuying with 289 pieces and about 8 days left. In case you can’t recall Orange Pi One specs, it’s a development board based on Allwinner H3 quad core Cortex A7 SoC, with 512 MB RAM, micro SD card for storage, 10/100M Ethernet,  a USB ports, and HDMI output. The best Linux OS for the board is probably Armbian. The normal price is around $13 to $14 shipped. Thanks to Theguyuk for the tip. Jean-Luc Aufranc (CNXSoft)Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 79 Comments on LibreELEC 8 for Intel Atom Bay Trail and Cherry Trail Devices with 32-bit UEFI Binary

LibreELEC 8 for Intel Atom Bay Trail and Cherry Trail Devices with 32-bit UEFI Binary

LibreELEC, a fork of OpenELEC, was announced several months ago, and images for various hardware platform were released in that time period. However, support for Intel Bay Trail and Cherry Trail platforms using a 32-it UEFI binary might not have always work, or was more difficult to install. piotrasd has now created a LibreELEC 8 + Kodi 17 beta 3 build especially for this type of devices, and tested it on Tronsmart Ara IZ37 Bay Trail mini PC. However, it should work on other Intel Atom Z3735F or Intel Atom x5/z7 mini PC or sticks with a 32-bit UEFI bootloader. If you have such device, you can try it the following instructions using a USB flash drive: Download and install Rufus or LibreELEC SD USB creator Download and unpack LibreELEC 8 32-bit UEFI image file Launch your USB creator program, select the firmware file, and make a bootable USB flash […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 3 Comments on Android 7.0, Android TV 7.0, and Yocto Project Ported to Pine A64 Boards

Android 7.0, Android TV 7.0, and Yocto Project Ported to Pine A64 Boards

A few weeks ago, Raspberry Pi 3 got an Android 7.0 Nougat port, and it’s usable for some app even simple games like Angry Bird, but there are still problems with 3D graphics, and hardware video decoding. But thanks to Pine64 forum’s member Ayufan, we now have Android 7.0 and Android TV 7.0 for Pine A64 boards with 1GB or more memory with 3D graphics, and hardware video acceleration for most apps. Everything is said to pretty much work, but there are some known issues, such as camera support (being worked on now), touchscreen support (not tested), YouTube is limited to 360p/480p as it does not support hardware video decoding, and Widevine DRM is not supported. Android 7.0 has also been shown to be about 10 to 15% faster than Android 5.1.1 in GeekBench. Ronnie Bailey has shot a video showing Pine A64 running Android TV 7.0 Nougat. If you […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 9 Comments on $20 pcDuino4 Nano is Yet Another Allwinner H3 Development Board (Sort of)

$20 pcDuino4 Nano is Yet Another Allwinner H3 Development Board (Sort of)

We already have plenty of low cost Allwinner H3 development boards thanks to several Shenzhen Xunlong Orange Pi boards and FriendlyARM NanoPi boards among a few others. Here comes another one with pcDuino4 Nano. pcDuino4 Nano (preliminary?) specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU up to 600 MHz System Memory – 1GB DDR3 SDRAM Storage – micro SD card slot Video & Audio Output – HDMI and 3.5mm jack for CVBS (composite + stereo audio) Connectivity – 10/100M Ethernet USB – 3x USB 2.0 host ports, 1x micro USB OTG port Camera – DVP Interface Expansions – 40-pin Raspberry Pi compatible header with UART, SPI, I2C, PWM, GPIOs, etc… Debugging – 4-pin header for serial console Misc – Power and reset buttons; 2x LEDs; IR receiver; on-board microphone. Power Supply – 5V/2A via micro USB port; 5V via VDD_5V pin […]

Exit mobile version