Linux News - Page 294 of 431 - CNX Software

December 21, 2015December 21, 2015 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

GeekBox and Landingship Android Overview and Benchmarks

This week-end I checked out GeekBox TV box, and Landingship baseboard, explained how to connect the two together and install various optional accessories such as an RTC battery and a cooling fan. GeekBox comes pre-loaded with Android 5.1 + Ubuntu dual boot image, and as I’ve already reviewed other Rockchip RK3368 TV boxes, and GeekBox is also a development platform, I’ll simply run several benchmarks on GeekBox, as well as test SATA performance with an SSD connected to Landingship carrier board in Android, before checking out the Linux part a little latter. That’s no quite how you want to place the fan, but I wanted to show the USB to TTL debug board and other wires can be connected with the case closed. This allowed me to easily check whether the fan was spinning during testing, and it never did… According to one forum post, the temperature currently needs to […]

December 20, 2015December 20, 2015 by Jean-Luc Aufranc (CNXSoft) - No Comments

Texas Instruments Introduces Entry level Sitara AM3351 Cortex-A8 Processor

Texas Instruments Sitara AM335x processor are designed by industrial applications, and found in develompent board such as BeagleBone Black or BeagleBone Green, and the company has recently launched the new Sitara AM3351 Cortex A8 processor without 3D GPU, no PRU just like AM3352, but they’ve also canned the two CAN interfaces (sorry, I had to) in order to bring the cost lower, while keeping the processor software and pin-to-pin compatible with other AM335x processors available in 13×13 mm package. TI Sitara AM3351 CPU clock will also be limited to 300 MHz to 600 MHz with respectively AM3351BZCE30 and AM3351BZCE60 parts. It will only come with one Gigabit Ethernet port instead of up to two ports of other members of the family that are produced in 15x15mm package, and temperature range is limited to 0 to 90 C. Other features remain the same, and the processors will support TI-RTOS, Linux, Android, […]

December 19, 2015December 20, 2015 by Jean-Luc Aufranc (CNXSoft) - 29 Comments

GeekBox TV Box Unboxing and Development Kit Assembly Guide

GeekBox is both an Android TV box based on Rockchip RK3368 octa-core processor, and a Linux development kit thanks to the CPU module inside the device, a baseboard and various accessories. The company has sent me a review sample, as well as the accessories currently available. So today, I’ll have a look at the box, and show how to connect everything together. GeekBox TV Box Unboxing I’ve received two carton boxes via DHL, one with GeekBox itself, and the other with some accessories. You could use GeeBox has a TV box, and forget about its development attributes, as the device comes with the usual accessories include a case, an HDMI cable, an infrared remote control, and a 5V/2A power supply. I was really surprised by how small it was compared to other 64-bit ARM TV boxes recently launched on the market, and looks very much like a small router with […]

December 17, 2015July 31, 2016 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

Amlogic S905X and S912 Processors To Support 4K VP9, HDMI 2.0a, Built-in DAC and More

I had heard some news that Amlogic S912 was delayed, and even possibly canceled, while talks about a new S908 processor surfaced recently with support for VP9 up to 4K resolution. We now have some more details as I’ve received some more information about Amlogic product roadmap, and S908 should be renamed S905M [Update: The name will apparently be changed to S905X now, the saga continues…] Amlogic S905 Amlogic S908 / S905M / S905X Amlogic S912 CPU Quad core Cortex A53 @ up to 2.0 GHz Quad core Cortex A53 @ up to 1.5/2.0 GHz Octa core Cortex A53 @ up to 2.0 GHz GPU Penta-core Mali-450 up to 750 MHz High perf gaming GPU Memory 16/32-bit DDR3, LPDDR2/3 Up to 2GB, DDR2133 16/32-bit DDR3/4, LPDDR2/3 Up to 2GB, DDR2400 Storage NAND Flash@BCH60 eMMC 5.0, SD, Nor Flash Video Decoding 4Kp60 10-bit HEVC, 4Kp30 H.264 4Kp60 10-bit HEVC, VP9 4Kp30 […]

December 16, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

$15 pcDuino3 Nano Lite Board Includes Gigabit Ethernet and a Real SATA Port

I often read people complain about the lack of SATA and Gigabit Ethernet on devices, and following up a discussion on a recent post about QNAP TAS-168 and TAS-268 NAS, I was made aware that pcDuino3 Nano board had a little brother without NAND Flash, nor an IR receiver that’s currently selling for $15 on Amazon US. pcDuino3 Nano Lite board specifications are exactly the same as the other version minus the stricken-through items: SoC – AllWinner A20 dual core ARM Cortex A7 @ 1.0 GHz with Mali 400MP2 GPU System Memory – 1GB DRAM Storage – 4GB NAND Flash, SATA connector and microSD card slot (up to 32GB) Video Output – HDMI 1.4 with HDCP support Audio Out – 3.5mm analog audio interface Connectivity – Gigabit Ethernet USB – 2x USB host, 1x USB OTG Expansion Headers – Arduino UNO extension interface with 14xGPIO, 2xPWM, 6xADC, 1xUART, 1xSPI, 1xI2C. […]

December 15, 2015December 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Aceberry S500 is a $60 Actions Semi S500 Development Board Comprised of a Module and a Baseboard

For some hard-to-explain reasons, Actions Semi S500 processor seems to be a popular choice for makers of boards, although I don’t think it has really been a success with hobbyists and makers so far. After ActDuino S500, LeMaker Guitar, Lemon Pi, Allo SPARKY, and Roseapple Pi boards, here comes another S500 quad core Cortex A9 development board with Aceberry S500 that’s quite inspired by LeMaker Guitar as seen by its baseboard and module design. Aceberry S500 board preliminary specifications: SoC – Actions Semi S500 quad core Cortex A9r4 processor @ 1.6GHz with PowerVR SGX544 GPU @ 500 MHz Memory – 1 GB DDR3 Storage – 8GB eMMC or NAND flash (16 and 32GB optional), SPI NOR flash Video Output – HDMI, and LCD connector Audio – HDMI, headset jack, digital output (RCA). Video Codec – H.265 (HEVC) and Ultra HD (4K*2K) video playback. Encoding up to 1080p@60fps. Connectivity – 10/100M […]

December 14, 2015December 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

QNAP TAS-168 and TAS-268 are NAS Running Android and Linux based QTS on Realtek RTD1195 Processor

QNAP has recently launched two network attached storage (NAS) devices with TAS-168 and TAS-268 that are based on Realtek RTD1195 dual core processor, and happen to run Android along side the company’s Linux based QTS operating system, and respectively have one and two bays for 2.5″ or 3.5″ hard drives. QNAP TAS-168 and TAS-268 specifications: SoC – Realtek RTD1195 dual core ARM Cortex A7 processor @ 1.1 GHz with Mali-400MP2 GPU System Memory – 2 GB DDR3 Storage 4 GB eMMC and SD card slot TAS-168 – 1x 2.5″ or 3.5″ SATA @ 3Gbs TAS-268 – 2x 2.5″ or 3.5″ SATA @ 3Gbs Video and Audio Output – HDMI port Connectivity – Gigabit Ethernet USB – 1x USB 3.0, 4x USB 2.0 host ports Misc – IR receiver, LEDs for HDD, LAN, status, and USB, buttons (Power, reset, USB copy) Power – TAS-168 – 12V/3A (36W) power adapter; TAS-268 – 12V/5A […]

December 14, 2015December 14, 2015 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

WiTi Router Board Powered by Mediatek MT7621A SoC Now Sells for $79

MQmaker launched their WiTi router on Indiegogo in early August, and they raised close to $30,000, enough to go into production. However, some people are understandably wary of crowdfunding campaigns, and likely postponed their decision to see how the project would progress. The good news is that the AC1200 board is now available for $79 + shipping ($9.05 in my case) on Aliexpress. WiTi router specifications have not changed much: Processor – Mediatek MT7621A dual core MIPS 1004Kc processor @ 880Mhz System Memory – 256MB RAM Storage – 16MB SPI NOR flash for firmware, 1x micro SD slot, and 2x SATA 3.0 ports supporting 3.5″ hard drives. Connectivity 2.4 GHz WiFi 802.11b/g/n up to 300Mbps 5 GHz WiFi 802.11a/n/ac up to 867Mbps 2x Gigabit Ethernet WAN ports 4x Gigabit Ethernet LAN ports 2x RF Antenna Connectors USB – 1x USB3.0 port Expansion – 30-pin header including USB, I2S, JTAG, UART, and GPIO […]