It’s hard to keep up, but Shenzhen Xunlong has launched another Orange Pi board, as two weeks after introducing Orange Pi Zero Plus 2 development board, the company has now introduced “Orange Pi Zero Plus 2 H5” board, with the exact same specification, except Allwinner H3 quad core Cortex A7 32-bit processor has been replaced by Allwinner H5 quad core Cortex A53 64-bit processor. Orange Pi Zero Plus 2 H5 board specifications: SoC – Allwinner H5 quad core Cortex A53 processor with 2+4 core Mali-450MP4 GPU System Memory – 512 MB DDR3 SDRAM Storage – 8GB eMMC flash + micro SD card slot Video Output – HDMI port Connectivity – 802.11 b/g/n WiFi + Bluetooth 4.0 LE (Ampak AP6212) with u.FL antenna connector and external antenna USB – 1x micro USB OTG port Camera – MIPI CSI port Expansion headers – Unpopulated 26-pin “Raspberry Pi B+” header + 13-pin header […]
Linux based iWave Systems OBD-II Dongle Comes with 4G LTE and GPS
OBD-II dongles that you connect to your car’s OBD-II port have been around for several years, but they were initially simple devices with USB or Bluetooth connectivity that you control with your smartphone or computer. More recently we’ve seen more complex OBD-II head-up-diplays, and boards such as Macchina M2 open-source hardware OBD-II board that takes various XBee modules for 4G, Ethernet, WiFi, Bluetooth, GPS, and so on. iWave Systems, a company better known for their system-on-modules, has now unveiled their own OBD-II dongle with NXP i.MX 6UL processor running Linux, and integrating 4G LTE and GPS by default. iWave Systems OBD-II dongle specifications: Processor – NXP i.MX 6UL ARM Cortex-A7 processor @ 528/696MHz Memory – 256 MB DDR3 (Optionally upgradeable to higher capacity) Storage – 256 MB NAND Flash (optionally upgradeable to higher capacity). Connectivity – Built-in 4G Modem with antenna, optional WiFi & Bluetooth 4.0 LE module Positioning – […]
NanoPi NEO2 Board, NanoHats, and BakeBit Starter Kit Review – Part 1: Hardware Overview & Assembly
NanoPi NEO 2 development board is an update of NanoPi NEO with a quad core 64-bit Allwinner H5 processor + 512 MB RAM, Gigabit Ethernet, and an extra audio header, which can be a great little board for headless application since there’s no video output. FriendlyELEC ask me whether I wanted to review to board with some of their NanoHATs add-on boards, and while I asked for NanoHat PCM5102A audio board and NEO Hub which I intended to use with Grove modules from my Wio Link Started Kit, I get a bit more than expected, as the company included sets of NEO 2 boards and accessories, NanoHATs, two serial debug board, and their BakeBit Starter Kit with several Grove modules to play with. Since I have so many things to look at in this first post, I’ll just describe the hardware, assemble it, quickly check the paper documentation, and give […]
CubieBoard6 Development Board Powered by Actions Semi S500 Processor Comes with SATA, LiPo Battery Support
CubieTech launched Cubieboard with Allwinner A10 processor in 2012, and while they may not be as popular as some other boards like Raspberry Pi, ODROID, or Orange Pi boards in 2017, the company is still around after around 5 years, and their latest board is Cubieboard6 powered by Action Semi S500 quad core Cortex A9 processor with 2GB RAM, 8GB flash, HDMI, wired & wireless connectivity, SATA, battery support and more. Cubieboard6 specifications: SoC – Actions Semi S500 quad core ARM Cortex-A9 processor with Imagination PowerVR SGX544 GPU System Memory – 2GB LPDDR3 Storage 8GB eMMC flash SATA 3.0 port for 2.5″ HDD/SSD up to 4TB micro SD card slot up to 32GB Video Output – HDMI 1.4b up to 1080p60 Audio I/O – Via HDMI output, 3.5mm audio output (HP) jack, 3.5mm audio input (MIC) jack Connectivity – 10/100M Ethernet, 802.11 b/g/n WiFi, Bluetooth 4.0 LE (AP6212) with u.FL […]
GnuBee Personal Cloud 1 Low Cost Linux NAS Supports Up to Six 2.5″ SATA Drives (Crowdfunding)
Networked Access Storage (NAS) with a large number of SATA bays usually cost several hundreds dollars up to thousands of dollars depending on the features set and performance, but there’s a new a project called GnuBee Personal Cloud 1, or GB-PC1, that delivers a MIPS Linux system supporting up to six 2.5″ SATA drives for less than $200. GB-PC1 NAS specifications: Processor – MediaTek MT7621A dual core, quad thread processor @ 880 MHz, overclockable to 1.2 GHz System Memory – 512 MB DDR3 Storage – micro SD card slot tested up to 64 GB, 6x 2.5” SATA HDD or SSD Connectivity – Dual Gigabit Ethernet USB – 1x USB 3.0 port, 2x USB 2.0 ports Serial port – 3-pin J1 connector or 3.5 mm audio-type jack Power – 12 VDC @ 3 A via 5.5 mm x 2.1 mm, center-positive barrel jack Dimensions – 21.6 cm (L) x 7 cm […]
Qualcomm 205 SoC is Designed for Entry-level 4G LTE Feature Phones Running Linux
Qualcomm has just introduced Qualcomm 205 “Mobile Platform” designed to bring 4G LTE connectivity and services to entry-level feature phones to emerging regions, such as India, Latin America, and Southeast Asia. The SoC features a dual core ARM CPU, an Adreno 304 GPU, and an LTE Cat 4 modem. Qualcomm 205 SoC specifications CPU – Dual Core ARM Cortex A7 processor at 1.1 GHz GPU – Qualcomm Adreno 304 GPU supporting OpenGL ES 3.0 Memory I/F – LPDDR2 & LPDDR3 up to 384 MHz Storage I/F – eMMC 4.5 flash Display – MIPI DSI up to 480p60 Cellular Connectivity X5 LTE modem supporting LTE Cat 4 with up to 150 Mbps download, 50 Mbps upload; Dual SIM card 2G, 3G and 4G support VoLTE support Connectivity – Support for 802.11 b/g/n & VoWIFI, Bluetooth 4.1, ANT+, FM radio, GPS/GLONASS/Beidou Camera – Dual 3MP camera support (rear + front) up to […]
UP Core is a Low Cost & Compact Intel Maker Board Powered by an Atom x5-Z8350 SoC (Crowdfunding)
The UP community has already launched Intel Cherry Trail and Apollo Lake boards in the past with UP Board and UP2 (squared) boards, and they are now about to launch a cheaper and smaller board called UP Core powered by Intel Atom x5-Z8350 processor with to 1 to 4GB memory, up to 64GB eMMC flash, HDMI, USB 3.0, … and I/O expansion connectors. UP Core specifications: SoC – Intel Atom x5-Z8350 “Cherry Trail” quad core processor @ 1.44 GHz / 1.92 GHz (Burst frequency) with Intel HD 400 graphics @ 200 / 500 MHz System Memory – 1, 2 or 4 GB DDR3L-1600 (soldered on board) Storage – 16, 32, or 64 GB eMMC flash, SPI flash ROM Video Output / Display – HDMI 1.4 port, full eDP (embedded DisplayPort) connector Audio I/O – Via HDMI, and I2S Connectivity – 802.11 b/g/n WiFi @ 2.4 GHz, Bluetooth 4.0 LE (AP614A) […]
$18.9 Orange Pi Zero Plus 2 Board: Allwinner H3, WiFi + Bluetooth LE, HDMI and 8GB eMMC Flash
When will they ever stop? Shenzhen Xunlong has launched yet another Allwinner H3 board called Orange Pi Zero Plus 2, that has not that much in common with Orange Pi Zero, since it uses a different processor (H3 vs H2+), adds HDMI, and implements WiFi and BLE via an Ampak AP6212 module.Orange Pi Zero Plus 2: SoC – Allwinner H3 quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU @ 600 MHz System Memory – 512 MB DDR3 SDRAM Storage – 8GB eMMC flash + micro SD card slot Video Output – HDMI port with CEC support Connectivity – 802.11 b/g/n WiFi + Bluetooth 4.0 LE (Ampak AP6212) with u.FL antenna connector and external antenna USB – 1x micro USB OTG port Camera – MIPI CSI port Expansion headers – Unpopulated 26-pin “Raspberry Pi B+” header + 13-pin header with headphone, 2x USB 2.0, TV out, microphone and […]