Linux News - Page 361 of 478 - CNX Software

May 17, 2015December 30, 2018 by Jean-Luc Aufranc (CNXSoft) - No Comments

Faytech FTA20 Allwinner A20 Industrial SBC Works with Touch Panels

Faytech is a company specializing in touch monitors and touch pc, but recently they started to develop embedded boards, and their latest FTA20 single board computer is powered by Allwinner A20 SoC, and offer various optional wireless options like Bluetooth, WiFi, 3G, and GPS. The board also supports the company’s 9.7”, 10.1”, 15” and 21.5” capacitive displays. FTA20 Specifications (to be confirmed): SoC – Allwinner A20 dua lcore Cortex A7 processor @ 1GHz with Mali-400MP2 GPU @ 500MHz System Memory – 1GB DDR3 Storage – 8GB NAND Flash, 1x SD card slot, 1x SATA port (via headers) Video Output – 1x HDMI, 1x VGA, 18/24Bit LVDS Audio – Audio-Chip Integrated HI-FI 100dB Audio Codec, 2x3W amplifier; 5.1 Channel High Definition Audio Codec; 1x Line-In, 1x Line-Out Connectivity 1x 10/100/1000Mbit RJ45 Ports with connector for POE WiFi Optional Bluetooth 4.0 and GPS 1x SIM-card (to be used with mPCIe modem???) USB […]

May 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Artway W8 Plus is a $100 Mini PC with HDMI and DisplayPort

Most mini PCs with Intel Atom Z3735F only come with HDMI output, while a few others feature both HDMI and VGA like MeLE PCG03, but if you need a cheap mini PC with both HDMI and DisplayPort as found in Intel NUC, Artway W8 Plus is worth a look especially since it sells for just $99 on Aliexpress. W8 Plus specifications: SoC – Intel Atom Z3735F quad core processor @ 1.33 GHz (Bust freq: 1.83 GHz) with Intel HD graphics System Memory – 2 GB DDR3L Storage – 32 GB eMMC (16, 64 or 128GB optional) + micro SD card slot Video Output – HDMI 1.4b, and DisplayPort Audio I/F – HDMI, audio out and mic in jacks Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi (RTL8723BS or AP6330), and Bluetooth 4.0 USB – 4x USB 2.0 host Misc – Power Button, RTC Power Supply – 5V/2A Dimensions – 107 x […]

May 13, 2015March 23, 2018 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

Samsung Artik is a Family of Arduino Compatible Boards for IoT Applications

There was a time when development boards were only reserved to companies, then boards like Arduino or Beagleboard made these available and affordable to consumers, and with the introduction of the Raspberry Pi, the maker movement grew even more rapidly, and many low cost boards started to be designed and manufactured mostly my smallest companies. But now larger companies like Intel or Qualcomm have jumped on the makers’ bandwagon, and the latest entry is Samsung with their Artik platform currently comprised of three boards that are programmable with the Arduino IDE. Let’s go through specifications for the three boards: Artik 1 SoC – Dual Core MIPS32 processor @ 250MHz (microAptiv UP) and 80MHz (microAptiv UC) without GPU Memory – 1MB RAM on-chip Storage – 4MB SPI flash Display – Up to WVGA (800×480) Connectivity – Bluetooth Low Energy with chip antenna Security – Secure element Sensor – 9-axis motion sensor […]

May 12, 2015May 12, 2015 by Jean-Luc Aufranc (CNXSoft) - 14 Comments

Orange Pi Plus (Allwinner H3) Firmware Images and Linux SDK Released

Orange Pi Plus is a development board based on the new Allwinner H3 quad core Cortex A7 processor that supports 4K video output and decoding. The boards comes with 1GB RAM, 8GB eMMC, HDMI output, Gigabit Ethernet, Wi-Fi, SATA and more, and sells for $49 on Aliexpress. When I first covered the board in February, it was already listed on Aliexpress, but I could not find any firmware image, or source code, but this has now changed. There are now four firmware files: Lubuntu_1404_For_OrangePiplus_v0_8_0_.img.xz – Lubuntu 14.04 image Raspbian_For_OrangePiplus_v0_8_0.img.xz – Raspbian for Allwinner H3 orangepi-plus-debian-server-card-v0.9.img.xz – A Debian server image sun8iw7p1_android_orangepi-plus_uart0.rar – Android 4.4.2 image that needs to be flash with PhoenixCard in Windows (Linux tools are not working yet) Beside the firmware images, the company also releases a Linux SDK (h3-lichee-1.0.tar.gz) with Linux 3.4 kernel source code, u-boot, and relevant tools. I assume these should also work on Orange […]

May 8, 2015June 18, 2018 by Jean-Luc Aufranc (CNXSoft) - 62 Comments

CHIP is a $9 Linux Development Board Powered by Allwinner R8 (Crowdfunding)

It’s quite common to find MCU board for less than $10, but if you want to run Linux, you’ll need to spend a bit more, unlessit’s sponsored, and today, the cheapest you can get is probably the $20 Raspberry Pi Model A+, unless you go with some OpenWRT compatible routers. But there’s now a new board in development, called CHIP, with Allwinner R8 Cortex A8 processor, 512MB RAM, and 4GB NAND flash, as well as wireless connectivity, that will bring cost even lower, as you can pledge $9 on Kickstarter to fund its development. C.H.I.P specifications: SoC – Allwinner R8 Cortex A8 processor @ 1 GHz with Mali-400 GPU (Compatible with Allwinner A13) System Memory – 512 MB RAM Storage – 4GB NAND flash Connectivity – 802.11 b/g/n Wi-Fi + Bluetooth 4.0 Video Output – 3.5mm jack for composite video and audio (HDMI and VGA available via adapters) USB – […]

May 8, 2015 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

MINIX NEO Z64W (Intel Atom Z3735F) mini PC gets HDMI Audio in Ubuntu

We’ve been able to run Ubuntu on Intel Atom Z3735F mini PCs, as well as other Linux distributions, for a while, but with an important caveat: HDMI audio would not work, so instead you had to use an external USB sound card to get any audio. Luckily the problem seems solved, as Linuxium has now released a script (audio-wifi-minix-neo-z64-release.sh) and relevant files that will patch your system to enable HDMI audio, and WiFI on MINIX NEO Z64W running Ubuntu. Ian Morrison (Liuxium) compiled a Linux kernel and the Wi-Fi driver, together with a modified DSDT (Differentiated System Description Table) table to fix an ACPI bug. He used John Pemberton’s Bay Trail Audio HDMI patch, as well as help from Paul Kendall for identifying the ACPI DSDT table bug, Bastien Nocera (hadess) for the wifi source code and DroidMote Server / Client for the wifi pointer. A quick demo shows WiFi […]

May 1, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Linaro 15.04 Release with Linux 4.0 and Android 5.1

Linaro 15.04 has been released with Linux 4.0 (baseline), Linux 3.10.74 and 3.14.39 (LSK), and Android 5.1.1. Other noticeable changes include support for the new DragonBoard 410c 96boards compliant board, the addition of A80 Optimusboard (Allwinner A80) to Android Kitkat build, Hisilicon D01 support added to the Debian installer, and support for Ubuntu ARM64 Gnome rootfs. Highlights of the release: Linux Linaro 4.0-2015.04 updated linaro-android topic: aosp/android-3.18 branch has been merged GATOR topic: version 5.20.1 updated integration-linaro-vexpress64 topic by ARM LT (FVP Base and Foundation models, and Juno support) updated topic from Qualcomm LT (IFC6410 and DB410c boards support): Resource Power Manager (RPM) – MSM Shared Memory Driver (SMD) driver quite some changes under drivers/gpu/drm/ related to adv7511 and adv7533 support ASoC support for QCOM platforms external Connector Class (extcon) support (used for USB VBUS and ID detection) Linaro builds of AOSP 15.04 baseline updated to android-5.1.1_r1 updated Nexus 10 […]

April 30, 2015 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Forlinx Embedded Introduces a Features-packed Freescale i.MX6 Industrial Board

Forlinx Embedded Technology has made several ARM9, ARM11, and Cortex A8 boards in the past, and they’ve now launched their first ARM Cortex-A9 board powered by Freescale i.MX6 Quad processor with 1GB RAM, 8GB eMMC Flash, HDMI, LCD, and LVDS interfaces, mPCIe connector for 3G module, SATA, GPS, CAN bus, RS485 port, and more. The board is composed of a baseboard and a 220-pin CPU module (soldered) with the following combined specifications: SoC – Freescale i.MX6 Quad with 4x ARM Cortex A9 cores @ up to 1.2 GHz and Vivante GC2000 3D GPU System Memory – 1GB DDR3 Storage – 8GB eMMC, SATA connector, and SD card slot up to 32GB Video Output / Display I/F – HDMI 1.4, LCD interface (7″ capacitive touch available), and 2x 8-bit LVDS interface. 4-wire resistive touch. Audio – 1x stereo audio jack, 1x mono microphone jack, 2x speaker headers Camera I/F – 1x […]