Linux News - Page 371 of 434 - CNX Software

November 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Boston Viridis 2.0 and AAEON CRS-200S-2R ARM Based Servers Powered by Calxeda Quad core Cortex A15 SoC

Calxeda unveiled its new ECX-2000 Server-on-a-Chip (SoC) at ARM Techcon 2013. Calxeda new chipset features 4 cortex A15 cores, support up to 16GB RAM, and thanks to the move from Cortex A9 to Cortex A15 supports hardware virtualization. I’ve stumbled across two new servers powered by ECX-2000: Boston Viridis 2.0 and AAEON-CRS-200S-2R. Let’s have a look Boston Viridis 2.0 The successor of Boston Viridis powered by Calxeda ECX-1000 quad core Cortex A9 SoC, Viridis 2.0 features six ECX-2000 cards, with each card hosting two four-core SoCs @ 1.8GHz, and consuming as little as 6 watts of power. The server runs Ubuntu 13.10 operating systems, and OpenStack Havana platform, and would typically be used for cloud computing, distributed storage, and virtualization. Viridis 2.0 is a 4U ARM microserver that, and the company claims this can allow up to 1000+ servers in a rack, or about 1.5PB of data storage per rack. […]

November 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Dual Tuner “Simple.TV by SiliconDust” DVR Runs Linux on Zenverge ZN200 SoC

“Simple.TV by SiliconDust” is the full name of a digital video recorder (DVR) featuring two tuners, one input supporting antenna (ASTC) and over-the-air cable (ClearQAM) connections, one Ethernet, and one USB 2.0 host port for external mass storage devices. The device, called HD Homerun on SiliconDust website, is powered by Zenverge ZN200 STB SoC, and runs Linux. This is an upgrade of Simple.TV 1, and it allows you to watch a channel, while recording another, or record 2 programs thanks to the 2 tuners. An app will also be available to watch recorded TV program on Android tablets (coming soon) or iPads, and there’s also an HTML5 client to watch TV in any compatible browser. Recorded shows can be watch from any location with Internet access if you have a Premier subscription. Simple.TV 2 specifications: SoC – Zenverge ZN200 STB SoC with a quad Stream HD Transcoder, audio processing engine, […]

November 21, 2013November 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Embedded Linux Conference Europe 2013 Videos and Presentation Slides

I uploaded several Embedded Linux Conference Europe videos in 2011 and 2012 that were hosted by Free Electrons and/or the Linux Foundation for download, but this year, it seems the Linux Foundation has discovered a new (to them) online video service called YouTube, and created a playlist with (for now) 18 sessions of ELCE 2013. I’ve embedded the playlist below starting with the “Status of Embedded Linux (2013)“, by Tim Bird, Sony Mobile which takes place every year, and is among the most popular presentations. Most of ELCE 2013 presentation slides are already available from eLinux.org. You can also have a look at the list of ELCE 2013 talks I featured before the event took place. [Update: I’ve just watched the Status of Embedded Linux video, and I though it may be interested to list the topics (and keywords) used for what has happened in embedded linux in the last […]

November 20, 2013 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Gumstix Announces Solution Kits for their CPU Modules and Boards

Gumstix has recently unveiled several solution kits featuring their Overo and DuoVero Computer-on-Modules (CoMs), Pepper single board computer, and several expansions boards, together with required accessories, and software packages, in order to help their customers getting started more easily. All these solutions are based on Texas Instruments OMAP3, OMAP4, and/or Sitara processors, and run Linux (Ubuntu or Yocto), and sometimes Android for the kits with displays. The solutions kits target 6 different types of applications and/or markets: Robotics Robotic Development Kit (Pictured above) with one Overo AirSTORM CoM (OMAP3703), and RoboVero expansion board. The kit is better suited for motor control applications. Mobile Robotic Development Kit with one Overo AirSTORM CoM, and Turtlecore expansion board to be used with iRobot Create. The kits ship with a Linaro (Ubuntu for Overo) system card and Robot Operating System (ROS) pre-installed. Handhelds 3.5″ Handheld Development Kit featuring Overo AirSTORM CoM with Alto35 cutomizable […]

November 19, 2013November 19, 2013 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

iMX6 Rex Open Source Hardware SoM and Baseboard Designed to Teach Schematic and PCB Layout Design

Voipac, a Slovakian manufacturing company, has recently unveiled iMX6 Rex module and iMX6 Rex development baseboard, which have mainly been developed in order to support FEDEVEL Academy Schematic Design and Advanced PCB Layout courses, but can also be used for other purposes. The module is powered by Freescale i.MX6 Dual (Solo and Quad also available on request), and comes with 512MB RAM (upgradeable to 4GB), and up to 32MB SPI flash. The complete hardware will be released under an open source hardware license, but with some caveats as I’ll explain later. iMX6 Rex module specifications (basic configuration): SoC – Freescale iMX6 processor up to 1.2GHz / 2 cores (1 and 4 cores also available) System Memory – 512MB DDR3-1066 (533MHz), up to 4GB Storage – 2MB On board SPI Flash, up to 32MB 10/100/1000 Mbps Ethernet PHY 2 high speed board to board connectors (only one required) with signals for HDMI, […]

November 18, 2013November 18, 2013 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Binwalk Utility Helps You Analyze and Reverse-Engineer Firmware Files

Binwalk is a “firmware analysis tool designed for analyzing, reverse engineering and extracting data contained in firmware images”. This tool written in python supports Linux, and somewhat Mac OS X, can scan firmware files for files signature, and can be useful for hacking firmware files, and finding hidden information. Let’s install binwalk first. It’s very easy in a Debian or Ubuntu machine, as you just have to download the package, and run a script for installation:

wget https://binwalk.googlecode.com/files/binwalk-1.2.2-1.tar.gz
tar xzvf binwalk-1.2.2-1.tar.gz
cd binwalk-1.2.2-1/src
sudo ./debian_quick_install.sh

wget https://binwalk.googlecode.com/files/binwalk-1.2.2-1.tar.gz

tar xzvf binwalk-1.2.2-1.tar.gz

cd binwalk-1.2.2-1/src

sudo ./debian_quick_install.sh

If you have another Linux ditributions, it’s just a little more complicated. You still need to download and extract the release package as above, but you’ll have to install the following package depending on the features your need: Minimal installation – python 2.6 or greater, and python-magic To generate entropy plot graphs – python-matplotlib For automated extraction: Packages – mtd-utils zlib1g-dev liblzma-dev gzip bzip2 tar unrar arj p7zip p7zip-full openjdk-6-jdk Build and install […]

November 18, 2013November 21, 2013 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

$90 JynxBox M1 Pure Linux XBMC Network Media Streamer

After The Little Black Box (TLBB), there’s now another ARM based media player that comes pre-installed with XBMC Linux: Jynxbox M1 Pure Linux. The device is based on AMLogic AML8726-M1 single core Cortex A9 processor @ 800MHz, and comes with 2GB flash, Wi-Fi and Ethernet connectivity, HDMI output, and more. Jynxbox M1 Pure Linux specifications: SoC – AMLogic AML8726-M1 single core Cortex A9 @ 800MHz with ARM Mali-400 GPU System Memory – N/A (but likely 512 MB) Storage – 2 GB Nand Flash + micro SD/SDHC memory slot (Up to 32GB) Video Output – HDMI 1.3 Audio Output – HDMI Video container formats – AVI, RM/RMVB, MKV, WMV, MOV, MP4, WEBM, DAT(VCD format), VOB(DVD format), MPEG, MPG, FLV, ASF, TS, TP, 3GP Audio formats – MP3, WMA, WMV, APE, OGG, FLAC, AAC, etc… Connectivity – 10/100M Ethernet + 802.11 b/g/n Wi-Fi USB – 3x USB 2.0 host ports Misc – […]

November 15, 2013August 10, 2014 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Terasic’s Altera DE1-SoC Board Based on Cyclone V Dual Cortex A9 + FPGA SoC Sells for $150 Up

A few months ago, Terasic unveiled its SoCKit powered by Altera Cyclone V dual Cortex A9 + FPGA. They’ve now announced a cheaper version will a less powerful Cyclone V SoC and lower specs (e.g. less RAM, only one sensor, etc…) that sells for as low as $150 for educational or academic purposes, and $199 for the rest of us. Altera DE1-SoC Board specifications: FPGA Device Cyclone V SoC 5CSEMA5F31 Device Dual-core ARM Cortex-A9 (HPS – Hard Processor System) 85K Programmable Logic Elements 4,450 Kbits embedded memory 6 Fractional PLLs 2 Hard Memory Controllers Configuration and Debug Quad Serial Configuration device – EPCQ256 on FPGA (EPCQ = Erasable Programmable Configurable Quad-SPI device) On-Board USB Blaster II (Normal type B USB connector) Memory Device 64MB (32Mx16) SDRAM on FPGA 1GB (2x256Mx16) DDR3 SDRAM on HPS 128MB QSPI Flash on HPS (QSPI Flash does not come pre-installed out of factory) Micro SD […]