Reviews - Page 104 of 119 - CNX Software

November 24, 2014 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

Handbrake 0.10 Supports H.265 and VP8 Video Encoding

HandBrake is an open-source video transcoding tool that I use each time I upload a video on YouTube, simply because it will let me crop the beginning or end of a video as needed, can make web optimized videos, has an easy to use user interface, and greatly reduces the size of the video shot with my camera. HandBrake 0.10 has now been released, and it adds H.265 and VP8 encoding support via respectively x265 v1.4 and linbpx, as well as QuickSync video support, but the latter only in Windows. There are also various other changes include OpenCL accelerated scaling. Handbrake is available for Windows, Mac OS X, and Ubuntu operating systems. It’s part of Ubuntu repository, but if you want the latest version, and support for MPEG-4 (m4v), you’ll need to install it from a PPA:

sudo apt-add-repository ppa:stebbins/handbrake-releases
sudo apt-get update
sudo apt-get install handbrake-gtk

sudo apt-add-repository ppa:stebbins/handbrake-releases

sudo apt-get update

sudo apt-get install handbrake-gtk

I’ve tested with the video I shot yesterday, to see if I […]

November 22, 2014November 22, 2014 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Unboxing of Zero Devices Z5C Thinko TV Stick based on Rockchip RK3288 Processor

It’s been a long long while since I’ve received an Android HDMI TV Stick, probably because many people prefer TV boxes, and the new ARM processors usually dissipate a lot of heat so thermal management may be an issue with small form factors. But I’ll finally get the opportunity to test a powerful HDMI dongle based on Rockchip RK3288 quad core processor, as Zero Devices sent me their Z5C Thinko TV stick. I’ll start by listing the specifications, and taking some pictures of the device and the board, because doing a full review hopefully sometimes next week. Zero Devices Z5C Thinko Specifications The stick has specifications similar to full sized Android media player minus ports like Ethernet and S/PDIF: SoC – Rockchip RK3288 quad core Cortex A12/A17 @ 1.8 GHz + ARM Mali-T764 GPU with support for OpenGL ES 1.1/2.0 /3.0, and OpenCL 1.1 System Memory – 2GB DDR3 Storage […]

November 21, 2014April 1, 2015 by Jean-Luc Aufranc (CNXSoft) - 24 Comments

ODROID-XU3 Lite Development Board – Android Setup and Benchmarks

It’s been nearly ten days since I make ODROID-XU3 Lite unboxing, and my plans to first test Linux on the board were thwarted due a problem with HDMI. Luckily, after several attempts I managed to boot the board with Android. So today, I’ll show how to install or update Android on the board, and run a few benchmarks. But since there’s always a silver lining, I’ll start buy writing a bit about the HDMI issue, as I learned a few things on the way. HDMI Output Tribulations ODROID-XU3 Lite looks like a nice and powerful kit, and it may be one of the most cost effective ARM board on the market since it comes to performance to price ratio, so I was excited to try it, but as you know if you’ve read my unboxing post I did not work quite as planned, as all I got was a black […]

November 19, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

CubieTruck Metal Case Unboxing and Disassembly

CubieTruck Metal Case is a kit comprised of CubieTruck (aka CubieBoard 3), a 128GB SSD, a 5,300 mAh battery, a power adapter, and various cables. In case you are not familiar with CubieTruck, it’s a development board by CubieTech, based on Allwinner A20 dual core ARM Cortex A7 processor with 2GB RAM, 8GB NAND flash, a SATA connector, HDMI & VGA outputs, Gigabit Ethernet, 2 USB host ports, and a mini USB OTG port. CubieTech decided to sent me a kit, as it was featured on CNX Software, and today, I’ll show what’s exactly is inside the kit since the product description is not 100% clear. I’ve been told it’s pre-installed with Lubuntu, so in a separate post next week, I’ll try Linux, report on the SSD performance, and check the battery UPS function, and possibly life on a charge. CubieTruck Metal Case Unboxing I’ve received the kit in a […]

November 18, 2014December 12, 2014 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

MINIX NEO X6 Media Hub Review

Last week-end, I took a few pictures of MINIX NEO X6 media hub, and had a look at the company’s firmware and forum support which indeed seems to be good. Today, I’ve completed the full review of MINIX NEO X6, and I will compare it to two of its lower priced competitors: MXQ S85 and EM6Q-MXQ. First Boot, Settings and First Impressions The IR remote control works fine, including continuous up ad down pressing, but I switched to using Mele F10 Deluxe air mouse for convenience. I’ve connected an Ethernet cable, an HDMI cable, a micro SD card, a USB hard drive, and a USB hub with two RF dongles for my air mouse and gamepad, a USB flash drive, and a UVC webcam. I’ve connected the power, pressed the power button on the side of the box, but nothing happened at first… You have to press the button one […]

November 17, 2014September 29, 2015 by Jean-Luc Aufranc (CNXSoft) - 30 Comments

Unboxing of Eny M8S H.265 / 4K Android Media Player Powered by Amlogic S812 Processor

M8S and M8C Android TV boxes are updates of M8 / TM8 box, replacing Amlogic S802 quad core processor with Amlogic S812 processor which has about the same feature except it bring HEVC/H.265 hardware video decoding. M8S comes with 2GB RAM, whereas M8C features only 1GB RAM. Eny Technology decided to send me M8S for review. As usual, I’ll start with some pictures of the package, box, and board, and will do the full review in the next few days. M8S Unboxing Pictures The company send me the parcel via DHL which I promptly received with the product in the package below marked “4K OTT TV BOX” and a predominant “HEVC”. The back of the package list the main specifications: quad core processor, octo core Mali 450 GPU, Android Kitkat. and so on. There’s also a sticker showing the MAC address, which starts with C4:4E:AC for those interested. The box […]

November 15, 2014 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Unboxing of MINIX NEO X6 Android Media Hub

MINIX is a Hong Kong company known for its NEO series Android media players, which are a bit more expensive that the company, but the hardware and especially support is supposed to be better, justifying the higher price. I had never tried it a MINIX device, but thanks to Tinydeal I now have MINIX NEO X6 powered by Amlogic S805 quad core processor, with 1GB RAM, and 8GB eMMC, so I’ll soon be able to find out if the praises for the company are justified, or simply hyped. Today, I’ll take some pictures of the devices, and try to open it to check out the hardware, before writing a full review in a few days, and compare it a much cheaper device like MXQ S85. MINIX NEO X6 Unboxing Photos The parcel was sent by Singapore Posts so it took a couple of weeks to be delivered. The device is […]

November 13, 2014February 2, 2016 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

Zsun SD111 Wireless USB Flash Drive Review

Zsun SD111, SD112 and SD113 are Wi-Fi / USB flash drives with respectively 8GB, 16 GB and 32GB storage. GearBest sent me the 8GB version (SD111) for review, as it could be an interesting platform to hack. I’ve take picture of the device, take it apart to check the board, review quickly the standard features with Android and Ubuntu, and try to access the board from the network. Zsun SD111 Unboxing I received the device in the following package. The flash drive comes with a micro USB to USB cable for charging and accessing the device from a computer, and a user’s manual in Chinese. You’ll probably prefer using a soft copy user manual in English… Zsun SD111 Board and Battery To open the stick, insert a sharp and thin object in the hole for the neck strap, and push upwards to lift the top cover a little, and finish […]