robotics News - Page 20 of 30 - CNX Software

February 25, 2021February 25, 2021 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

StereoPi v2 stereoscopic camera is powered by Raspberry Pi CM4 (Crowdfunding)

StereoPi stereoscopic camera based on Raspberry Pi Compute Module 3 was introduced in late 2019 on Crowd Supply. The camera can record 3D video, create 3D depth maps with OpenCV, and benefits from the Raspberry Pi software ecosystem. The developers are now back with an upgraded model. StereoPi v2 comes with many of the same features, but as it is based on Raspberry Pi CM4 (Compute Module 4) it offers better performance, Gigabit Ethernet, Wifi & Bluetooth connectivity out of the box, while other features like PoE, TFT screen, shot button, etc.. are optional. StereoPi v2 specifications: Supported SoM – Raspberry Pi CM4 or CM4Lite modules Storage – MicroSD card socket Video Output – Micro HDMI port Camera I/F – 2x MIPI CSI camera connector plus “hackable camera lines” Networking – Gigabit Ethernet RJ45 port, plus optional WiFi 5 and Bluetooth 5.0 on Raspberry Pi CM4 module USB – 2x […]

February 9, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Jetson AGX Xavier based Edge AI Platform supports 8 GMSL automotive cameras and 10Gbps Ethernet

Jetson Xavier AI Edge computer with 8 GSML cameras

Neousys Technology, a Taiwan-based provider of rugged embedded systems, has introduced the NRU-110V Edge AI inference platform powered by an NVIDIA Jetson AGX Xavier SoM. It comes with eight FAKRA Z connectors to support up to eight GMSL automotive cameras, as well as one 10GbE (10 Gigabit Ethernet) port for real-time video data transfer. The system specifically supports GMSL cameras with 3-exposure HDR, LED flicker mitigation, good light-sensitivity, and IP67 waterproof characteristics, and also comes with a synchronize mechanism to simultaneously capture high-quality images from 8 GMSL cameras while accepting GPS PPS signal to align image data with other sensors. That makes it suitable for various applications ranging from autonomous driving, mobile robots, precision agriculture, intelligent V2X, to teleoperation. Neousys NRU-110V specifications: System-on-Module – NVIDIA Jetson AGX Xavier SoM with SoC NVIDIA 512-core Volta GPU 8-core Arm Carmel CPU 2x NVDLA Engines 7-Way VLIW Vision Processor Memory – 32GB LPDDR4x […]

January 18, 2021January 19, 2021 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Cybovac S31 Review – A smart robot vacuum cleaner with visual SLAM support

I’ve been asked to review robot vacuum cleaners in the past but refused because they were quite basic with a simple vacuum function, obstacle detection, maybe a mopping function, and not much else. But Kyvol Cybovac S31 is different as it integrates a laser distance sensor (LDS) enabling visual SLAM to create a map of your house, and can be controlled with a mobile app for Android or iOS which ended up even more useful than I initially expected. S31 Smart Robot Vacuum Cleaner Unboxing The package was much bigger than I expected, mostly because the charging station also includes a dust bag where dust from the main unit is automatically vacuumed each time cleaning is complete. Key features of the system as shown above: LDS robot vacuum cleaner (main unit) 4 levels of suction power Cleaning modes – Auto, area, spot, edge Anti-drop and anti-collision features 2.4 GHz WiFi […]

November 11, 2020January 7, 2021 by Jean-Luc Aufranc (CNXSoft) - No Comments

Fanless Tiger Lake UP3 embedded box PC targets industrial IoT, robotics & automation

Last month Vecow introduced SPC-6000 fanless embedded PC powered by an Atom x6425RE Elkhart Lake processor, and considering Tiger Lake UP3 embedded processors were announced at about the same time as Atom x6000E-series family, it should come as no surprise that the Taiwanese company has introduced a more powerful Tiger Lake UP3 model. Vecow SPC-7000/7100 Tiger Lake UP3 embedded box PC is equipped with a choice of Core i3 to i7 processors with 12W to 28W TDP with support for Iris Xe graphics, 2.5GbE, TSN networking that makes it suitable for factory automation, robotics, cellular V2X, smart retail, and any AIoT/Industry 4.0 applications. Vecow SPC-7000/7100 specifications: SoC – Intel Core i7/i5/i3 quad-core Tiger Lake UP3 processor with Intel UHD graphics or Intel Xe Graphics; 12W to 28W configurable TDP System memory – Up to 32GB via 1x DDR4 3200MHz SO-DIMM socket Storage – 1x M.2 Key B 2260 Socket, 1x […]

October 19, 2020October 19, 2020 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Gumstix Introduces CM4 to CM3 Adapter, Carrier Boards for Raspberry Pi Compute Module 4

Raspberry Pi Trading has just launched 32 different models of Raspberry Pi CM4 and CM4Lite systems-on-module, as well as the “IO board” carrier board. But the company has also worked with third-parties, and Gumstix, an Altium company, has unveiled four different carrier boards for the Raspberry Pi Compute Module 4, as well as a convenient CM4 to CM3 adapter board that enables the use of Raspberry Pi CM4 on all/most carrier boards for the Compute Module 3/3+. Raspberry Pi CM4 Uprev & UprevAI CM3 adapter board Gumstix Raspberry Pi CM4 Uprev follows the Raspberry Pi Compute Module 3 form factor but includes two Hirose connectors for Computer Module 4. The signals are simply routed from the Hirose connectors to the 200-pin SODIMM edge connector used with CM3. Gumstix Raspberry Pi CM4 Uprev is the same except it adds a Google Coral accelerator module. Gumstix Raspberry Pi CM4 Development Board Specifications: […]

October 6, 2020October 6, 2020 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Petoi Bittle Palm-sized Robot Dog uses Arduino and Raspberry Pi for STEM education (Crowdfunding)

You’ve probably already watched a video featuring Boston Dynamics Spot, a headless robot dog used in various industries including healthcare, public safety, construction, oil & gas, etc.. It could also be yours if you wanted a robotic pet dog at home, as long as you have $75,000 US to spare. Petoi Bittle looks eerily similar, but it’s much smaller as it fits in your palm, and could be yours for $225 on KickStarter as a kit to assemble yourself that you may get as soon as December. Bittle robot dog is designed for STEM education and can be programmed using the Arduino IDE, Python, or even Codecraft visual programming IDE. Bittle is comprised of 4 main hardware components: Plastic parts and fixtures – Body, four legs, head (which can be used to hold Arduino modules), springs, screws, etc… Actuators – 9x P1S servo with a controllable angle of 270 degrees, […]

September 30, 2020November 3, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Arm Announces Cortex-A78AE CPU, Mali-G78AE GPU & Mali-C71AE ISP for autonomous automotive & industrial applications

Arm has announced new CPU, GPU, and ISP specifically designed for autonomous automotive and industrial applications with respectively Cortex-A78AE CPU, Arm Mali-G78AE GPU, and Arm Mali-C71AE ISP. Arm Cortex-A78AE CPU Key features and specifications: Architecture – Armv8.2-A (AArch32 at ELO only) Extensions – Armv8.1, Armv8.2, and Armv8.3 extensions (LDAPR instructions only), RAS extensions, Armv8.4 Dot Product, Cryptography extensions, RAS extensions Microarchitecture Up to 4x CPU cores per cluster Out of order pipeline Neon / Floating Point Unit included with INT8 Dot Product and IEEE FP16 Optional Cryptography Unit 48-bit Physical Addressing (PA) Memory system and external interfaces 32kB to 64kB L1 I-Cache / D-Cache 256kB to 512kB L2 Cache Optional 512kB to 4MB L3 Cache ECC Support LPAE Bus interfaces – AMBA ACE or CHI Optional ACP, peripheral port Functional Safety Support – ASIL D Systematic1 and ASIL D Diagnostic2 Security – TrustZone Interrupts – External GICv4 Generic timer – […]

September 23, 2020 by Jean-Luc Aufranc (CNXSoft) - No Comments

Gateworks Venice Industrial IoT SBC Family Features Dual Ethernet and mPCIe Sockets

US-based Gateworks is known for its Ventana and Newport embedded networking single board computers, and the company has now introduced a third family with Venice SBC family based on NXP i.MX 8M Mini SoC with support for multimedia capabilities through MIPI-DSI, MIPI-CSI and I2S Audio headers, and targetting industrial IoT with dual Ethernet, and mini PCIe expansion sockets that can be used for 802.11ax/ac/b/g/n WiFi, 5G/4G/3G/CATM1 cellular modems, and more. The company plans to introduce four different models with GW7100, GW7200, GW7300, and GW7400 with an increase in size and feature set for each model, and mechanically compatible with previous Gateworks families. But at launch, only GW7300 SBC is available so we’ll focus our reporting on this particular model. Gateworks GW7300 specifications: SoC – NXP i.MX 8M Mini single, dual or quad-core Arm Cortex-A53 processor @ up to 1.6GHz, with Arm Cortex-M4 at 400+MHz, 3D GPU (OpenGL ES 2.0), 2D […]