sata News - Page 16 of 28 - CNX Software

October 15, 2017October 15, 2017 by Jean-Luc Aufranc (CNXSoft) - No Comments

iWave Systems iW-RainboW-G25D is a SMARC 2.0 Compliant Snapdragon 820 Development Kit

iWave Systems previously launched iW-RainboW-G25S single board board powered by Qualcomm Snapdragon 820 processor. The company is now back with a new Snapdragon 820 development kit called iW-RainboW-G25D that complies with SMARC 2.0 SoM specifications. The kit include a SoM with 3GB RAM, 32GB storage, WiFi and Bluetooth connected to a SMARC compliant baseboard, and optionally features a 5.5″ AMOLED touch screen display. iWave Systems iW-RainboW-G25D development kit specifications: APQ8096 SMARC iW-RainboW-G25M SoM: SoC – Qualcomm Snapdragon 820 (APQ8096) quad core Kryo CPU with Adreno 530 GPU @ 624MHz, Hexagon 680 DSP @ 825 MHz (no modem) System Memory – 3GB LPDDR4 RAM Storage – 32GB eMMC Flash, micro SD slot Connectivity PCIe to Gigabit Ethernet + PHY 802.11a/b/g/n/ac Wi-Fi + BT4.1 Low Energy (BLE) GPS/GNSS receiver 314-pin MXM 3.0 edge connector as per SMARC 2.0 specifications SMARC Carrier Board Storage – M.2 slot (back), SATA, SD card slot (back), […]

September 27, 2017February 19, 2018 by Jean-Luc Aufranc (CNXSoft) - 40 Comments

Banana Pi BPI-W2 is a Features-Packed Realtek RTD1296 Development Board

I’ve reviewed several Realtek RTD1295 platforms with Zidoo X9S and Eweat R9 Plus, and I was generally impressed by the storage, Ethernet, and WiFi performance. 4K video playback was good too, as long you don’t have any 4K H.264 videos at 30 fps or more. Most devices would also run Android and OpenWrt side-by-side bringing the best of both operating for respectively apps & multimedia, and server functions. HDMI input – with PVR, time-shifting and PiP functions – was also a bonus, However so far, nobody cared to design a maker board powered by RTD1295 processor. Since then we’ve learned Realtek was working on RTD1296 processor with even more Gigabit Ethernet, USB 3.0, and SATA interfaces, and SinoVoIP has now designed a board based on the SoC called Banana Pi BPI-W2. Banana Pi BPI-W2 preliminary specifications: SoC – Realtek RTD1296 quad core Cortex A53 processor with ARM Mali-T820 MP3 GPU […]

September 25, 2017November 3, 2017 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

NanoPi Duo Starter Kit Review – Part 1: Unboxing and Assembly

NanoPi Duo is an inexpensive Allwinner H2+ quad core board with 256MB or 512MB RAM that can fit into a breadboard, and FriendELEC also provides a starter kit with a carrier board, heatsink, enclosure, USB debug board and cable, as well as optional accessories such as an half-length SSD drive. The company sent me two kits for review, so I’ll first check out what I got, and show how to assemble the kit, before actually playing with the board and kit next month. NanoPi Duo Starter Kit Unboxing I got a bunch of boxes and bubble wraps in the package… … and indeed received two identical kits. Each kit comes with a NanoPi Duo board with soldered headers, a mini Shield for NanoPi Duo, a heatsink and thermal pad set, a micro USB to USB cable, a USB to TTL debug board and cable, and acrylic case, and user manuals […]

September 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Maiwo K104c is a $9 2.5″ SATA Drive Enclosure with a USB Type C Cable

USB type C receptacles are found in more and more devices, but if you have older accessories or peripherals they likely use micro USB, and USB type A cables or plugs. One way to work around this problem is to get adapter, for example, I purchased a micro USB to USB Type C adapter last year, but this morning I’ve come across a USB type C hard drive enclosure, something I had not seen before, probably because I did not look for it. Maiwo K104c enclosure specifications: Designed for 2.5″ SATA drives (HDD/SSD) up to 9.5mm thick USB type C to SATA 3.0 interface using JMS567 chipset UASP protocol support (aka USB attached SCSI) OS agnostic so it should work with any operating systems Dimensions – 21.50 x 2.70 x 1.20 cm Weight – 130 x 79 x 17mm JMicron JMS567 chipset is the same as used in NanoPi NEO […]

August 21, 2017 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Hardkernel ODROID-HC1 Home Cloud One Stackable NAS is now available for $49

Hardkernel has just launched their ODROID-HC1 stackable NAS system based on a cost-down version of ODROID-XU4 board powered by Samsung Exynos 5422 octa-core Cortex-A15/A7 processor, which as previously expect, you can purchase for $49 on Hardkernel website, or distributors like Ameridroid. We now have the complete specifications for ODROID-HC1 (Home Cloud One) platform: SoC – Samsung Exynos 5422 octa-core processor with 4x ARM Cortex-A15 @ 2.0 GHz, 4x ARM Cortex-A7 @ 1.4GHz, and Mali-T628 MP6 GPU supporting OpenGL ES 3.0 / 2.0 / 1.1 and OpenCL 1.1 Full profile System Memory – 2GB LPDDR3 RAM PoP @ 750 MHz Storage UHS-1 micro SD slot up to 128GB SATA interface via JMicron JMS578 USB 3.0 to SATA bridge chipset capable of achieving ~300 MB/s transfer rates The case supports 2.5″ drives between 7mm and 15mm thick Network Connectivity – 10/100/1000Mbps Ethernet (via USB 3.0) USB – 1x USB 2.0 port Debugging […]

August 14, 2017August 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Intel Gemini Lake Block Diagram and Yet More Info

So yesterday, I wrote about some of the new features of Intel Gemini Lake processors like native HDMI 2.0, 4-wide pipeline, 10-bit VP9, and possible built-in 802.11ac wireless controller. I went to bed, and somehow this morning I woke up with something that looks like Gemini Lake (GLK) block diagram, and a few more details. So we indeed have HDMI 2.0 output, as well as DP 1.2a and eDP 1.4, and an embedded wireless controller via the CNVi (Connectivity Integration Architecture) block for WiFi’s MAC and Bluetooth’s MAC + Baseband modem. We’ll have plenty of USB 3.0 host interfaces, and the usual PCIe and SATA 3 interfaces. Still no UFS support, but eMMC 5.1 is supported, as well as x128 DDR4, LPDDR3 and LPDDR4 memory up to 2400 MHz (No ECC support). Cache size is confirmed to be 4MB for up to four GoldMont Plus (GLM+) cores, which combined with […]

August 3, 2017December 8, 2017 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Unistorm AK1 Intel Celeron J3455 mini PC Sells for $158

Last month, I wrote about MeLE PCG35 Apo mini PC based on Intel Celeron J3455 “Apollo Lake” processor. It has started to sell for $179 this week, but there’s now a cheaper option with similar specifications thanks to Unistorm AK1 mini PC going for $158.30 instead. Unistorm AK1 mini PC specifications with highlights in bold or stricken-through showing differences with PCG35 Apo: SoC – Intel Celeron J3455 quad core “Apollo Lake” processor @ 1.50 / 2.30 GHz with a 12 EU Intel HD Graphics 500 @ 250/750 MHz (10W TDP) System Memory – 4GB LPDDR3 Storage – 32GB eMMC flash, 1x 2.5″ SATA HDD slot, 1x mSATA SSD slot, 1x micro SD slot Video Output – HDMI 1.4 up to 4K @ 30 Hz, and VGA Audio – Via HDMI, 3.5mm headphone jack Connectivity – Gigabit Ethernet, dual band 802.11b/g/n/ac WiFi & Bluetooth 4.0 USB – 2x USB 3.0 ports, […]

July 26, 2017July 27, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Beelink S1 Mini PC Comes with Up to 8GB RAM, Supports M.2 SSD & SATA Storage, and Cortana via a Built-in Microphone

While many Apollo Lake mini PCs are sold by Chinese manufacturers, few of come with up to 8GB RAM, and include an internal 2.5″ SATA bay. But Beelink S1 mini PC does, and it also include an M.2 SSD slot, so you can have fast storage for the operating system using an SSD, and cheap and larger storage for your data with the SATA bay. If you are a fan of voice commands, a built-in microphone working with Cortana is also included. Beelink S1 mini PC specifications: SoC – Intel Celeron N3450 quad core Apollo Lake processor @ 1.10 GHz / 2.20 GHz (Burst frequency) with 12 EU Intel HD graphics 500 @ 200/700 MHz (6W TDP) System Memory – 4 or 8 GB DDR3 Storage – 64 GB eMMC flash, internal SATA bay, M.2 SSD slot up to 512 GB, micro SD card slot up to 128GB Video Output […]