sata News - Page 8 of 25 - CNX Software

October 23, 2020October 27, 2020 by Jean-Luc Aufranc (CNXSoft) - 10 Comments

ClearFog CX CN9K Mini-ITX 10GbE/5GbE networking SBC runs Linux or FreeBSD

Last year, SolidRun introduced ClearFog CX LX2X networking single board computer offering up to 100GbE via NXP LX2160A 16-core Cortex-A72 communication processor that followed ClearFog CX 8K ARMADA 8040 networking board launched the year before. The Israeli company is now working on two ClearFog CX CN9K networking SBC’s powered by CEx7 CN913x system-on-module featuring Marvell Octeon TX2 CN913x quad-core Cortex-A72 processor and offering multi-gigabit Ethernet with various 10Gbps, 5Gbps, and Gigabit Ethernet ports. ClearFog CN9132 Pro The higher-end version of the ClearFog CX CN9K boards is ClearFog CN9132 Pro with the following specifications: CEx7 CN9132 COM Express Type 7 module SoC – Marvell OCTEON TX2 CN9132 quad-core Arm Cortex A72 up to 2.2 GHz (Industrial temperature up to 2.0 GHz) System Memory – Up to 16GB SO-DIMM DDR4 up to2400MT/s (not included by default) Storage – Up to 32 GB eMMC flash, SPI NOR flash COM Express Type 7 board-to-board […]

October 20, 2020October 21, 2020 by Jean-Luc Aufranc (CNXSoft) - 38 Comments

ODROID-HC4 low-cost dual NAS comes with 4GB RAM, supports 2.5-inch and 3.5-inch SATA drives

[Edit: Hardkernel has now updated their documentation to clarify the NAS uses ASM1061 PCIe to SATA controller instead of JMB582] It’s hard to find low-cost NAS platforms often because of the mechanism to insert drives and the enclosure add to the cost. An alternative is to use boards like Hardkernel ODROID-HC1 for 2.5-inch drives or ODROID-HC2 for 2.5- and 3.5-inch drives, but each board supports only one drive. The designs are stackable, but you’d need one Linux board per drive, so it’s not ideal. The Korean company has now launched a new model with ODROID-HC4 powered by an Amlogic S905X3 processor and shipping with a case supporting two 2.5-inch or 3.5-inch SATA drives that will start selling later this month for just $65 and up. ODROID-HC4 specifications: SoC – Amlogic S905X3 quad-core Cortex-A55 processor @ 1.8 GHz with Mali-G31 MP2 GPU System Memory – 4GB DDR4 Storage 128 Mbit SPI […]

September 26, 2020September 26, 2020 by Jean-Luc Aufranc (CNXSoft) - 20 Comments

Argon One M.2 Case for Raspberry Pi 4 Adds SATA Support, Full-Sized HDMI Ports

Yesterday, we noted that DeskPi Pro Raspberry Pi 4 case offered an interesting alternative to Argon One enclosure thanks to support for 2.5-inch SATA SSD/HDD, full-sized HDMI ports, and a PWM fan. What I did not know at the time was that Argon40 had worked on an improved version of their case with Argon One M.2 case also offering full-sized HDMI ports, support for M.2 SATA SSD storage, and a software-controlled fan. Argon One M.2 case key features and specifications: SBC – Compatible with Raspberry Pi 4 Storage – M.2 SATA SSD with Key-B or Key-B & M with UASP support on Raspberry Pi 4; Enabled via an adapter with two USB 3.0 port as shown in the render above Video & Audio Output – 2x Full-Sized HDMI ports plus AV port Expansion – Access to 40-pin GPIO header externally as in the original case Misc – Built-in IR receiver […]

June 8, 2020June 8, 2020 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Beelink GS-King X Android TV Box, Dual HDD NAS & HiFi Audio System Launched for $250

Beelink GS-King X is an Android 9.0 TV box and a NAS with two 3.5″ SATA bays powered by Amlogic S922X-H processor combined with 4GB RAM and 64GB eMMC flash that was unveiled last month with some blurry renders. We now have for the details about the device, which has started to sell for $249.99 plus shipping on GeekBuying when using a “Fixed Priced” coupon, in my case 4ATAOTO6. Updated Beelink GS-King X specifications: SoC – Amlogic S922X-H hexa-core big.LITTLE processor with 4x Arm Cortex A73 cores @ up to 2.2 GHz, 2x Arm Cortex A53 cores @ 1.8 GHz, Arm Mali-G52MP4 GPU @ 846MHz; 12nm process System Memory – 4GB LPDDR4 RAM Storage – 64GB eMMC flash, microSD card slot, 2x 3.5″ SATA HDD drive bay for up to 32TB storage in total Video Output – HDMI 2.1 up to 4K @ 60 Hz with HDCP 2.2 Video – […]

May 13, 2020May 19, 2020 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

Beelink GS-King X Amlogic S922X-H TV Box Comes with 3.5″ SATA Drive Bays

After Beelink GT-King and GT-King Pro, it appears the company is working on another Amlogic S922X(-H) TV box with Beelink GS-King X providing two internal 3.5″ SATA Bays. [Update May 14th: The post has been updated to reflect two SATA bays are available, not only one] Beelink GS-King X (preliminary) specification: SoC – Amlogic S922X-H hexa-core big.LITTLE processor with 4x Arm Cortex A73 cores @ up to 1.8 GHz, 2x Arm Cortex A53 cores @ 1.9 GHz, Arm Mali-G52MP4 GPU @ 846MHz; 12nm manufacturing process System Memory – 4GB LPDDR4 RAM Storage – 64GB eMMC flash, microSD card slot, 2x 3.5″ SATA HDD drive bay for up to 16TB storage Video Output – HDMI 2.1 up to 4K @ 60 Hz with HDCP 2.2 Video – AVE-10 engine with 4K UHD H.265/VP9/AVS2 video decoding up to 60 fps, Dolby Vision, Advanced HDR10, HDR10+, HLG, and PRIME HDR high-dynamic range support […]

March 23, 2020August 3, 2021 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

HeimVision HM241 HD NVR Kit Review – Part 1: Unboxing, Teardown and HDD Installation

I’ve reviewed a few solar-powered security cameras in the last year, and from time to time, I’m being asked to review more from time to time, but I asked for a change, and instead, I wanted to look into security network video recorders (NVR). HeimVision offered this opportunity with its HM241 HD NVR Kit which they also call a “wireless security camera system”, and comes with 4 Full HD security cameras besides the NVR itself. In the first part of the review, I’ll check out the hardware, and take the opportunity to install a 3.5″ hard drive, before doing a proper installation, and report my experience about the software in one or two extra articles. HM241 HD NVR Kit Unboxing People working at customs seem to be fond of larger packages, checked it out in details hence the “Opened and Releases” sticker on the package, and I had to pay […]

January 3, 2020 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Kobol Helios64 RK3399K SBC & 5-Bay NAS Pre-Orders to Start Next Week

We covered Rockchip RK3399K processor a few months ago, as a version of RK3399 processor qualified to run at 2.0 GHz, or supporting a wider-temperature range (-20 to +85°C) at 1.8 GHz. We found out about the new processor, as Kobol was working on a Helios64 SBC designed for NAS that featured RK3399K SoC. At the time, we just had a drawing of the board and some specifications, but now the company has announced pre-orders for the board and a complete 5-bay NAS kit will start next week and the actual shipping start in March. Kobol Helios64 SBC Specifications: SoC – Rockchip RK3399K hexa-core processor with 2x Arm Cortex-A72 cores @ 2.0 GHz, 4x Cortex-A53 cores @ 1.6 GHz System Memory – 4GB LPDDR4 Storage – 16GB eMMC 5.1 flash, 5x SATA 3.0, 1x M.2 SATA slot shared with one SATA 3.0 port, MicroSD port Connectivity – 1x 2.5GbE port, […]

December 8, 2019February 27, 2020 by Jean-Luc Aufranc (CNXSoft) - 46 Comments

ROCK Pi SATA HAT Targets ROCK Pi 4 & Raspberry Pi 4 NAS

Radxa ROCK Pi 4 is a single board computer (SBC) powered by Rockchip RK3399 hexa-core processor and inspired by Raspberry Pi 3 Model B+. The company has now designed ROCK Pi SATA HAT expansion board to design 4-bay NAS based on Raspberry Pi 4 and ROCK Pi 4. There are 3 models with support for 2, 4 or 5 drives: Dual/Quad SATA HAT connected over two USB 3.0 ports and working with both boards Penta SATA HAT connected over PCIe and compatible with ROCK Pi 4 only ROCK Pi Dual/Quad SATA HAT Specifications: 2x or 4x SATA connectors supporting 2.5″ or/and 3.5″ HDD/SSD 2x USB 3.0 port to connect to RPi 4 via one or two JMS561 USB to SATA controllers Storage Features – HDD suspend mode, UASP, software RAID 0/1/5 Misc Fan and heatsink header for Raspberry Pi 4 CPU cooling Optional PWM control fan for HDD heat dispatching […]