Single Board Computer News - Page 31 of 88 - CNX Software

May 13, 2022May 13, 2022 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

Allwinner T507 industrial processor powers automotive single board computer and module

Forlinx OKT507-C single board computer for automotive applications is powered by FETT507-C system-in-module equipped with Allwinner T507 industrial processor, 2GB RAM, and 8GB eMMC flash. Allwinner T507 offers the same features as Allwinner H616 for TV boxes with a quad-core Cortex-A53 CPU, a Mali G31 MP2 GPU, and the same I/Os, but the processor is AEC-Q100 certified, supports -40°C to +85°C temperature range, and Allwinner promises over 10 years of longevity. OKT507-C single board computer specifications: FETT507-C System on Module SoC – Allwinner T507 quad-core Cortex-A53 @ 1.5GHz with Arm Mali-G31 MP2 GPU with support for OpenGL ES 3.2/2.0/1.0, Vulkan1.1, OpenCL 2.0; (“2.25W power consumption under load”) System Memory – 2GB DDR3L Storage – 8GB eMMC flash Board-to-board connectors for carrier board connection Supply Voltage- 5 V Dimensions – 70 x 40 mm Temperature Range – -40°C to +85°C Carrier board Storage – MicroSD card slot Display I/F 1x LCD […]

May 12, 2022October 13, 2022 by Jean-Luc Aufranc (CNXSoft) - 23 Comments

Mekotronics R58 is a cost-optimized Rockchip RK3588 SBC going for $169 and up

Mekotronics R58 is a single board computer based on Rockchip RK3588 processor that will also be sold as a mini PC with an enclosure, and offers a cheaper alternative to the company’s R58X embedded mini PC with up to 16GB RAM, dual Gigabit Ethernet, dual SATA, etc… The R58 comes with fewer ports notably only one Gigabit Ethernet port, one SATA interface, and the RS485/RS232 terminal block and M.2 socket are gone, but it does add an extra HDMI output port, meaning it could support up to four independent displays. It still features up to 16GB RAM and 64GB eMMC flash. Mekotronics R58 specifications: SoC – Rockchip RK3588 octa-core processor with four Cortex-A76 cores @ 2.4 GHz, four Cortex-A55 cores @ 1.8 GHz, an Arm Mali-G610 MP4 GPU, a 6TOPS NPU, 8K 10-bit decoder, 8K encoder Memory & eMMC flash configurations 4GB LPDDR4x + 32GB eMMC flash 8GB LPDDR4x + […]

May 12, 2022May 12, 2022 by Jean-Luc Aufranc (CNXSoft) - 43 Comments

NanoPi R5S router SBC/gateway with 2x 2.5GbE, 1x Gigabit Ethernet, M.2 NVMe storage coming soon

FriendlyELEC’s family of NanoPi router SBCs and gateways will soon be extended with the NanoPi R5S board equipped with a Rockchip RK3568 quad-core Cortex-A55 processor, and providing three Ethernet ports (2x 2.5Gbps, 1x 1 Gbps), plus support for M.2 NVMe SSD storage. The company has not published any information publicly, but a post on Weibo social network reveals additional details with the single board computer being equipped with 2GB LPDDR4X, 8GB eMMC flash, two USB 3.0 ports, HDMI video output, and more. NanoPi R5S preliminary specifications: SoC – Rockchip RK3568B2 quad-core Cortex-A55 processor @ up to 2.0 GHz with Arm Mali-G52 MP2 GPU, 0.8 TOPS AI accelerator (RK3568B2 comes in a “plastic package” instead of the “metal-can type package” found on RK3568, but the features are the same) System Memory – 2GB LPDDR4 Storage 8GB eMMC flash for OS Key M socket for M.2 2280 NVMe SSD support Optional SPI […]

May 10, 2022May 10, 2022 by Jean-Luc Aufranc (CNXSoft) - 27 Comments

You can now buy Khadas VIM4 SBC for $199.90

Khadas VIM4 single board computer was first unveiled last October with Amlogic A311D2 octa-core Cortex-A73/A53 processor, 8GB LPDDR4X, but it’s only been launched today, and you can now buy the Khadas VIM4 board for right under $200. It is an upgrade to Khadas VIM3 Pro launched with Amlogiv A311D hexa-core processor a few years ago, and our testing in Android 11 revealed the main benefit may be the upgrade GPU that delivered a 67% boost in 3DMark, but CPU multi-core performance and memory bandwidth will also see some benefits over Amlogic A311D, even against in overclocked systems like ODROID N2+. Here’s a reminder of Khadas VIM4 specifications: SoC – Amlogic A311D2 octa-core processor with 4x Arm Cortex-A73 cores @ up to 2.2 GHz and 4x Cortex A53 cores @ up to 2.0 GHz, Arm Mali-G52 MP(8EE) GPU, (Note: no NPU at this time) System Memory – 8GB LPDDR4X @ 2016 […]

May 9, 2022May 9, 2022 by Jean-Luc Aufranc (CNXSoft) - 37 Comments

$95 Banana Pi BPI-R2 Pro 5-port Gigabit Ethernet router board is powered by Rockchip RK3568 SoC

Banana Pi BPI-R2 Pro is an update to the Banana Pi BPI R2 router board that replaces MediaTek MT7623A quad-core ARM Cortex-A7 processor with a much more powerful Rockchip RK3568 quad-core Cortex-A55 processor. The Banana Pi BPI-R2 Pro board looks very similar to the first generation R2 board with the same dimensions, 2GB RAM, HDMI & DSI display interfaces, five Gigabit Ethernet ports, one SATA port, two USB 3.0 ports, and one mPCIe socket, but it also adds one M.2 socket, support for MIPI CSI cameras, and extra storage with a 16GB eMMC flash. Banana Pi BPI-R2 Pro specifications: SoC – Rockchip RK3568 quad-core Arm Cortex-A55 processor @ 2.0 GHz with Mali-G52 GPU, 0.8 TOPS NPU System Memory – 2GB LPDDR4 (option for 4GB) Storage – Onboard 16GB eMMC Flash (option for 32 and 64GB), MicroSD card slot, 1x SATA III port, SPI flash for network boot Networking 5x Gigabit Ethernet […]

May 7, 2022May 29, 2022 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Khadas VIM4 Review – Part 2: Android 11 preview and benchmarks

In the first part of Khadas VIM4 review, I showed off the Amlogic A311D2 SBC and some accessories such as the DIY case and M2X expansion board to add M.2 SSD and modem and tried out OOWOW cloud services to install Ubuntu 20.04 server. I’ve now just gotten Fiber Internet at home, so it’s much more practical to test the system, and in the second part of the review, I’ve installed Android 11 on the VIM4 board, checked out settings and system info, and ran some benchmarks. It will be more like a preview since Android 11 is not a consumer-friendly system at this time, and is more designed for people wanting to build their own applications. Installing Android 11 on Khadas VIM4 with OOWOW system Last time around, I used OOWOW system install in the SPI flash on the board to download and install Ubuntu 20.04 server to the […]

May 5, 2022May 9, 2022 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

ROCK Pi 4 Model C+ SBC features 1.5 GHz Rockchip RK3399-T CPU, dual HDMI output

ROCK Pi 4 Model C+ is a single board computer (SBC) by a Rockchip RK3399-T hexa-core processor @ 1.5 GHz, equipped with 4GB RAM, and two micro HDMI ports to drive up to one 4K display, and one 2K display. It is yet another ROCK Pi 4 SBC from Radxa, and the first to use the down-clocked RK3399-T processor with other models based on Rockchip OP1 processor clocked at 2.0GHz (overclockable to 2.2/2.4GHz) or the traditional Rockchip RK3399 @ 1.8 GHz (overclockable to 2.0 GHz), and also the first of the family to offer dual HDMI output. ROCK Pi 4 Model C+ specifications: SoC – Rockchip RK3399-T big.LITTLE hexa-core processor with 2x Arm Cortex-A72 @ up to 1.5 GHz (up to 2.0 GHz overclock) 4x Cortex-A53 @ up to 1.4 GHz (up to 1.6 GHz overclock). Note the processor datasheet says the Cortex-A53 cores are limited to 1.0 GHz, but […]

April 30, 2022April 30, 2022 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

DIY SBC cases and SBC Case Builder tool based on OpenSCAD

Since you can’t always rely on single board computer (SBC) vendors to provide a case to match your needs, some went the DIY route. Willy Tarreau designed some laser-cut enclosures with Inkscape for various SBCs, while hominoids went a step further by developing the “SBC Case Builder” tool to automatically generate various types of 3D printable enclosures using OpenSCAD. Willy designed five similar enclosures for Khadas VIM3/VIM3L, FriendlyELEC NanoPi Fire3, SolidRun Clearfog Base networking SBC, Libre Computer AML-S805X-AC (aka “La Frite”), and AAEON UP Board. All cases are available in Inkscape SVG format, and Willy accepts contributions for other boards. You’ll need a laser engraver or CNC router to cut out those enclosures. Hominoids’ SBC Case Builder project attempt to automatize enclosure generation for SBCs using SBC Model Framework written in OpenSCAD. Work has focused on ODROID boards so far, but it should work for other vendors too. The parameters […]