thundercomm News - CNX Software - Embedded Systems News

thundercomm

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Linux 7.1 Release – Main changes, Arm, RISC-V, and MIPS architectures

Linux 7.1 Release – Main changes, Arm, RISC-V, and MIPS architectures

Linux 7.1 release

Linus Torvalds has just released Linux 7.1 on LKML: So it’s only Sunday morning back home, but it’s Sunday afternoon where I am right now, so I’m doing the 7.1 release at the regular time – just not in the regular timezone. This obviously means that the merge window opens tomorrow, but I’ll be in yet another timezone by then, so timing will all be a bit irregular. Normally I try to front-load the merge window and do as much as possible the first few days – this time I’m not sure that will work out with my laptop and a couple of long flights without internet, but I’ve made sure that I have fetched the early pull requests (thank you – you know who you are), so I will be able to do some of it off-line. Anyway, possible slight hiccups in the merge window aside, the news today […]

Posted on by Debashis Das - 1 Comment on Thundercomm TurboX C7790 Android and Linux development kit features Qualcomm Dragonwing Q-7790 Edge AI SoC

Thundercomm TurboX C7790 Android and Linux development kit features Qualcomm Dragonwing Q-7790 Edge AI SoC

Thundercomm TurboX C7790 Development Kit

Thundercomm has launched the TurboX C7790 development kit, a compact edge AI platform built around the Qualcomm Dragonwing Q-7790 (CQ7790S) processor. The kit offers up to 24 TOPS of AI performance and support for both Android and Linux operating systems. The development kit pairs a TurboX C7790 system-on-module equipped with 12GB LPDDR5X RAM and 128GB flash with a carrier board featuring a wide range of interfaces from dual GbE to HDMI, USB-C, and MIPI DSI display interfaces. Target applications include AI cameras, video conferencing, robotics, and edge AI gateways. TurboX C7790 Development Kit specifications: System-on-Module – TurboX C7790 SoC – Qualcomm Dragonwing Q-7790 (CQ7790S) 4nm processor CPU – Octa-core Kryo processor up to 2.8 GHz 1x Gold+ core @ 2.8 GHz 4x Gold cores @ 2.4 GHz 3x Silver cores @ 1.8 GHz GPU – Qualcomm Adreno 722 GPU up to 1.15 GHz VPU Video Decode – 4K120 H.264/H.265/AV1 Video […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Thundercomm TurboX C6690 SoM runs Android 15 on Qualcomm DragonWing QCS6690 SoC for terminal equipment

Thundercomm TurboX C6690 SoM runs Android 15 on Qualcomm DragonWing QCS6690 SoC for terminal equipment

Thundercomm CC6690 SoM

Unveiled at Embedded World 2025, Thundercomm’s TurboX C6690 is a SoM (System-on-Module) powered by a 4nm Qualcomm Dragonwing QCS6690 octa-core SoC, and designed for Android 15-based terminal equipment such as industrial handheld devices, industrial tablets, edge computing, and smart retail applications. The LGA system-on-module features a multi-chip package that combines 8GB LPDDR4x memory with 256GB UFS storage, and offers MIPI and DP (USB) display interfaces, four MIPI CSI camera interfaces, a USB 3.1 interface, a PCIe Gen2 interface, and various low-speed I/Os such GPIO, I2C, UART, and SPI. Thundercomm TurboX C6690 SoM specifications: SoC – Qualcomm Dragonwing QCS6690 CPU – Octa-core Qualcomm Kryo CPU 7-series (1x Kryo Prime core @ 2.9GHz, 3x Kryo Gold @ 2.7GHz, 4x Kryo Silver @ 2.0GHz) GPU – Qualcomm Adreno GPU 7-series DSP – Qualcomm Hexagon DSP with HVX and HMX ISP – Qualcomm Spectra ISP 665 image processing VPU Video Encode – Up to […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 6 Comments on Qualcomm RB3 Gen 2 Platform with Qualcomm QCS6490 AI SoC targets robotics, IoT and embedded applications

Qualcomm RB3 Gen 2 Platform with Qualcomm QCS6490 AI SoC targets robotics, IoT and embedded applications

Qualcomm RB3 Gen 2 Platform Vision Kit

Qualcomm had two main announcements at Embedded World 2024: the ultra-low-power Qualcomm QCC730 WiFi microcontroller for battery-powered IoT devices and the Qualcomm RB3 Gen 2 Platform hardware and software solution designed for IoT and embedded applications based on the Qualcomm QCS6490 processor that we’re going to cover today. The kit is comprised of a QCS6490 octa-core Cortex-A78/A55 system-on-module with 12 TOPS of AI performance, 6GB RAM, and 128GB UFS flash connected to the 96Boards-compliant Qualcomm RBx development mainboard through interposer, as well as optional cameras, microphone array, and sensors. Qualcomm QCS6490/QCM6490 IoT processor Specifications: CPU – Octa-core Kryo 670 with 1x Gold Plus core (Cortex-A78) @ 2.7 GHz, 3x Gold cores (Cortex-A78) @ 2.4 GHz, 4x Silver cores (Cortex-A55) @ up to 1.9 GHz GPU – Adreno 643L GPU @ 812 MHz with support for Open GL ES 3.2, Open CL 2.0, Vulkan 1.x, DX FL 12 DSP – Hexagon […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 1 Comment on Qualcomm Robotics RB1 and RB2 development kits launched for $199 and up

Qualcomm Robotics RB1 and RB2 development kits launched for $199 and up

Qualcomm Robotics RB1 RB2 Vision Kit

We quickly mentioned the Qualcomm Robotics RB1 and RB2 development kits in our post about Lantronix Open-Q 2210RB and 4210RB SiPs mostly to complain about the lack of information at the time. But things have changed the Qualcomm Robotics RB1 and RB2 devkits for cheaper, smaller Linux-powered robots with lower power consumption are now available, and we have more details with three options: Core Kit, Vision Kit, and Full Kit. So let’s have a closer look. All kits are based on the Qualcomm Robotics RB1/RB2 Core Kit with the following (preliminary) specifications: System-on-module RB1 –  Thundercomm TurboX C2210 SoC – Qualcomm QRB2210 CPU – Quad-core Cortex-A53 processor at up to 2.0 GHz GPU – Adreno 702 GPU at 845 MHz with support for OpenGL ES 3.1, Vulkan 1.1, OpenCL 2.0 Hexagon QDSP6 v66 DSP 1080p 30 fps encode / 1080p 30fps decode System Memory – 1GB or 2GB LPDDR4 Storage […]

Posted on by Jean-Luc Aufranc (CNXSoft) - 2 Comments on TurboX C7230 SOM integrates Qualcomm QCS7230 SoC for WiFi 6 & 5G 8K AI cameras

TurboX C7230 SOM integrates Qualcomm QCS7230 SoC for WiFi 6 & 5G 8K AI cameras

8K WiFi 6 AI camera development kit

Thundercomm TurboX C7230 SOM is a system-on-module powered by the just-announced Qualcomm QCS7230 hexa-core processor with 7 TOPS of AI performance and designed for WiFi 6 and 5G connected smart cameras with up to 8K resolution. The TurboX C7230 module comes with 8GB LPDDR5 (PoP), 128GB UFS storage, six MIPI CSI camera interfaces, two MIPI DSI display interfaces, as well as a QCA6391 chip for WiFi 6 and Bluetooth 5.1 connectivity, plus optional 5G cellular connectivity through an optional Snapdragon X55 module that connects to the TurboX C7230 development kit. TurboX C7230 SOM system-on-module specifications: SoC – Qualcomm Snapdragon QCS7230 hexa-core processor with 1x Kryo 585 Gold (Cortex-A77) core @ 2.84 GHz, 3x Kryo 585 Gold cores @ 2.4 GHz, and two Kryo 585 Silver (Cortex-A55) cores @ 1.8 GHz, 4 MB L3 cache, Adreno 650 GPU, Adreno 665 VPU, Adreno 995 DPU, Hexagon DSP with dual-HVX,  and Spectra 480 […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on TurboX C865 CPU module and 96Boards devkit feature Qualcomm QCS8250 IoT processor

TurboX C865 CPU module and 96Boards devkit feature Qualcomm QCS8250 IoT processor

TurboX C865 96Boards development kit

Thundercomm has unveiled another Qualcomm IoT module and development kit with the TurboX C865 SOM and development kit based on Qualcomm QCS8250, based on Snapdragon 865 but for IoT applications, which follows our coverage of the company’s TurboX CM2290 and C2290 SoM & devkit based on Qualcomm QCM2290/QCS2290 quad-core Cortex-A53 processor several days ago. The new TurboX C865 system-on-module is for higher-end IoT applications with a faster processor combines with 8GB LPDDR5 RAM, and 128G UFS storage, WiFI 6 & Bluetooth 5.1 connectivity, and the company also offers a 96Boards compliant development kit to help with the development of more advanced IoT products running Android 10. TurboX C865 SoM Specifications: SoC – Qualcomm QCS8250 octa-core Kryo 585 processor with Adreno 650 GPU, Adreno 665 VPU, Adreno 995 DPU, Hexagon DSP with quad HVX, Spectra 480 ISP; 15 TOPS AI processing power System Memory – 8GB LPDDR5 (PoP) Storage – 128G […]

Posted on by Jean-Luc Aufranc (CNXSoft) - No Comments on Qualcomm QCM2290/QCS2290 SoM and Devkit target Industrial IoT applications

Qualcomm QCM2290/QCS2290 SoM and Devkit target Industrial IoT applications

Last June, Qualcomm introduced several industrial IoT solutions that we did not cover at the time with Qualcomm QCM2290/QCS2290 IoT chip for camera applications, industrial handhelds, retail and tracking, Qualcomm QCS8250 WiFI 6 & 5G SoC for connected healthcare, digital signage, retail, and video collaboration, Qualcomm QCS6490/QCM6490 WiFI 6E & 5G SoC for connected healthcare, logistics management, retail, transportation, and warehousing, and Qualcomm QCS4290/ QCM4290 designed for cameras, industrial handhelds, and security panels with 4G LTE and WiFi 6 connectivity. Shortly after Qualcomm’s announcement, Thundercomm introduced the TurboX C2290/CM2290 system-on-module respectively based on Qualcomm’s quad-core Cortex-A53 QCS2290 SoC and QCM2290 SoC adding 4G connectivity. The module also offers WiF & Bluetooth, as well as MIPI display & camera interfaces, and the TurboX CM2290/C2290 development kit is also available to get started. TurboX CM2290 and C2290 SoM Specifications: SoC – Qualcomm Snapdragon QCM2290 or QCS2290 quad-core Cortex-A53 processor at up to […]