Posted on

PineBook Pro Linux / BSD Rockchip RK3399 Laptop Coming Up for $200

Pine64 announced the Pinebook laptop in 2016. The ultra cheap ($89 and up) laptop was based on Allwinner A64 quad core Cortex A53 processor coupled with 2GB RAM, 16GB storage, and a 11.6″ or 14″ display. It was never meant to be a replacement for your current laptop due to the low end specifications, but you could still use it to tinker with Arm Linux or *BSD, as a lightweight portable terminal, etc… Pine64 made several announcements in a single blog post right before FOSDEM 2019 where they’ll showcase some of their upcoming products including the Pinephone development kit that’s use to develop software for the upcoming Pinephone open source phone, PineTab *BSD/Linux-only tablet with  Allwinner A64 SoC, and an 11.6″ display like Pinebook laptop, a retro gaming case compatible with Rock64 and Rock64Pro boards, an open source IP camera based on Allwinner S3L processor,  Pine H64 Model B (Allwinner […]

Posted on

Cost-Optimized Rock960 Model C Board Sells for $69 and Up

96Boards compliant Rock960 board launched last year for $99 with Rockchip RK3399 processor, 2 to 4GB RAM, 16 to 32GB eMMC flash for $99 and up. However, now you can buy a Rockchip RK3399 SBC for as low as $45 plus shipping thanks to FriendlyElec NanoPi NEO4 board that comes with 1GB RAM and no built-in storage, relying instead on a micro SD card slot or eMMC socket. So VAMRS decided to design a cheaper version of their board with Rock960 model C that still benefits from being part of the 96boards ecosystem, is equipped with 1, 2 or 4GB LPDDR4 RAM, and the OS can boot from a micro SD card or an optional eMMC flash module. The 1GB version of the board is now sold for $69 on Seeed Studio with shipping scheduled for the 1st of February 2019. Rock960 model C preliminary specifications: SoC – Rochchip RK3399 […]

Khadas Edge2 Arm mini PC
Posted on

Buildroot For NanoPi NEO4 RK3399 SBC

NanoPi NEO4 is the smallest and cheapest RK3399 board so far, featuring the hexa-core processor into a $45 60×45 mm single board computer.  FriendlyELEC usually provides decent documentation and software support for their boards, but Flatmax was not satisfied with the build system provided by Rockchip / FriendlyELEC. So he took the matter into his own hands, worked on and released a buildroot external tree for building NanoPi NEO4 SD card images. Flatmax mentioned this is the first completely contained build system for the NanoPi NEO4. The build process is explained on Github, and basically goes like this: Clone buildroot

Install dependencies

Clone NEO4 buildroot external tree

Build the system

Flash it to the micro SD card

Just replace /dev/sdX with your actual SD card device.

Posted on

Khadas Edge Developer Package Review – Part 1: Unboxing, Captain and Edge-IO Expansion Boards

Shenzhen Wesion recently launched an Indiegogo campaign for their Rockchip RK3399/RK3399Pro based Khadas Edge, Edge-1S and Captain boards. The Edge boards have an interesting form factor as they are both standalone boards, and system-on-modules compatible with Captain carrier board, and the smaller Edge-IO board. While the crowdfunding campaign is on-going, the company decided to send me an early version of Khadas Edge Developer Package for evaluation. I’ll start out by checking out the content of the kit, and show how to get started with assembly, before reviewing the board with Linux at a later date. Khadas Edge Developer Package Unboxing I received the developer kit in a blank carton board package, but they’ll likely have a prettier package at launch like they did for heir VIM2 board. Anyway, the important part is the content. From top left to bottom right: An IR remote control, the package for the Edge board […]

Posted on

Giveaway Week – NanoPC-T4 RK3399 SBC

We started the week-end with a Rockchip RK3399 board, so it makes perfect sense to end giveaway week with a bang, and another RK3399 SBC: FriendlyElec NanoPC-T4. Like other such boards, NanoPC-T4 supports both Linux and Android, but since I had tested various RK3399 SBCs with Linux, instead I decided to review NanoPC-T4 with Android 7.1, and it performed mostly has expected although I found out a larger heatsink would be necessary for more consistent performance. FriendyElec normally provides good documentation and decent firmware images for their boards so that definitely a plus. The winner of the kit will receive half of what is shown in the photo above, as I received two kits with the board, a heatsink and screws, a remote control, a 12V power supply, and an acrylic case. To enter the draw simply leave a comment below. Other rules are as follows: Only one entry per […]

Posted on

Rockchip RK3399Pro EVB and NPU Performance Demos (Video)

Rockchip RK3399Pro was announced as an updated version of RK3399 processor with an NPU (Neural Processing Unit) capable of delivering 2.4 TOPS for faster A.I. workloads such as face or object recognition. There haf been some delays in the past because of a redesign of the processor that placed the NPU’s RAM on the PCB instead of on-chip for cost reasons. Eventually we got more details about RK3399Pro, and today I also received a 15-page presentation with some more information about the software, and processor itself. But even more interesting, that’s the first time I see Rockchip’s official RK3399Pro EVB (Evaluation Board), and the guys at Khadas uploaded a video to explain a bit more about the board, and showcase the NPU performance measured up to 3.0 TOPS with an object recognition demo, and an “body feature” detection demo – for the lack of a better word – running in […]

AAEON Intel Arc
Posted on

Tiny NanoPi Duo2 Board Comes with WiFi, a Camera Interface, an Optional 2G-IoT Dock

NanoPi Duo was launched last year as an ultra-cheap ($8+) Arm Linux board that fits into a breadboard. The board was powered by Allwinner H2+ processor coupled with 256 or 512MB RAM, and the infamous XR819 802.11b/g/n WiFi chip. FriendlyElec has now launched NanoPi Duo2, that’s still breadboard compatible, but with a slightly longer form factor, Allwinner H3 processor, 512 MB RAM, better WiFi thanks to an AP6212 module, and an extra camera interface. As we’ll see further below the company also developed a carrier board for 2G cellular IoT applications. NanoPi Duo2 specifications with highlights in bold showing differences again NanoPi Duo: SoC – Allwinner H3 quad core Cortex A7 processor @ 1.2 GHz with Mali-400MP2 GPU System Memory – 512 MB DDR3 SDRAM Storage – micro SD card slot, footprint for SPI flash Connectivity – 802.11 b/g/n WiFi + Bluetooth 4.0 LE (Ampak AP6212  module) with chip antenna, […]

Posted on

More Details about Rockchip RK3399Pro SoC, and RK1808 NPU

First announced in January 2018, Rockchip RK3399Pro was supposed to be a pin-to-pin compatible with Rockchip RK3399 processor, and adding a Neural-Network Processing Unit (NPU) capable of delivering 2.4 TOPS for acceleration A.I. workloads. Shortly after Pine64 announced they’d be offering Rockpro64-AI board in August, and later on Vamrs unveils ROCK960 PRO at a Linaro Connect event with an expected Q2 2018 launch. But none of the RK3399Pro boards are available, as there have been delays with RK3399Pro, and some commented an external NPU would be launched first with further details.   But today – courtesy of Vamrs – we have some more details about RK3399Pro features, a likely explanation for the delay, and some information about Rockchip RK1808 NPU chip. Contrary to the CES 2018 announcement, Rockchip RK3399Pro will come in a 27x27mm FCBGA1372 package instead of the 22x22mm FCBGA828 package for RK3399. So pin-to-pin compatibility is out of […]

Khadas VIM4 SBC