CNX Software - Embedded Systems News

January 16, 2013January 19, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

DaVinci Movile Kite Full-HD Tablet Boots Android and Ubuntu

DaVinci Mobile, an Italian company, has just announced a Samsung Exynos 4412 quad core tablet running Android 4.0 (ICS) and Ubuntu 12.04 Precise that should sell for 373 Euros in Italy, or just 29 Euros with a subscription. The specifications of this tablet are as follows: SoC – Samsung Exynos Quad-Core Cortex A9 processor @ 1.4 Ghz + Quad-Core Mali-400MP GPU System Memory – 2GB DDR3 Storage – 32GB flash + microSD card socket Display – 10.1 “IPS Multi-touch Capacitive Panel (1920×1200) with a viewing angle of 178 ° Connectivity Wi-Fi – 82.11 b/g/n Bluetooth 4.0 GPS- A-GPS Sensors – Gyroscope Camera – VGA front camera, 2.0 MP rear camera USB – miniUSB port Audio I/O – 3.5 mm jack for headphones Battery – 5400mAh 3.7V Weight – 539g Dimensions – 258.3x164x9.5mm The hardware specifications appear to perfectly match Ramos W30HD tablet, sold for less than $300 on Chinese websites […]

January 16, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

BoFs: Developer Tools and Methods: Tips & Tricks – ELCE 2012

Tim Bird, senior staff software engineer at Sony Network Entertainment, hosts a BoF session about tools & methods for embedded Linux developers at ELCE 2012. Abstract: In this Birds-of-a-Feather-session, Tim will share some of his favorite tips for developing embedded Linux software. This will include tips for using ‘git’, how he does multi-platform development, and tips for other tools that other developers might find useful. Prior to the event, Tim will do a survey and solicit ideas from other developers as well. Please come to this BoF prepared to share your own productivity tips for embedded Linux development. Tim talks is divided into the following key points: Git tips – How to finds info about commits (git log, git show), use aliases (e.g. for colored output), find a commit that caused problem (git bisect), and more Patch management – quilt patch managing tool, diffinfo, and splitpatch (to break patches apart) […]

January 16, 2013January 16, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Barebox Bootloader Status Update – ELCE 2012

Sascha Hauer, kernel developer at Pengutronix, gives an update about the status of Barebox bootloader at the Embedded Linux Conference 2012 in Barcelona, Spain. Abstract: Booting Linux is still a hot topic on embedded systems. It has been 3 years since the last presentation about Barebox at ELC-E, and the barebox community has grown and developed many new and unique features during that time. The talk gives an update on the status of barebox, including MMU support, compressed images, menu system, automouter, tftp, nfs filesystem, USB updating techniques and other goodies. The presentation is for kernel porters who need a robust, flexible,extensible and well structured tool to bring up Linux on embedded hardware. It is equally suitable for new and experienced barebox users. Agenda of the talk: Tour through Barebox – Basic hardware initialization (SDRAM, clocks), Startup, User Interface, Start operating system, Update and Initial hardware bring-up. Devicetree support Multi-platform […]

January 16, 2013January 16, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Upgrading Embedded Linux Without Bricking – ELCE 2012

Arnout Vandecappelle, senior embedded software architect at Essensium/Mind, talks about ways to greatly decrease the risk of bricking your board/device during upgrade thanks to gubies scripts and tools at the Embedded Linux Conference in Barcelona, Spain, on November 6, 2012. Abtract: Embedded systems are often modified remotely, e.g. to upgrade the firmware or change the configuration. This may however break the system and render it inaccessible, which is a major problem if the device is hard to reach physically. Unfortunately, no catch-all failsafe solution exists to make sure that the device stays accessible remotely even if a modification goes wrong. Instead, the possible failures have to be anticipated and covered. This talk discusses some of the frequently occurring failures, how they can be detected and handled. These include power failure, kernel crashes, network failure and data corruption. We include examples of concrete use cases. Finally, there is room for discussion about […]

January 16, 2013January 16, 2013 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

The End of Embedded Linux (As We Know It) – ELCE 2012

Chris Simmonds, freelance consultant and trainer (2net ltd), discusses the future of embedded Linux now that storage and processing power are no longer an major issue, and try to find the best Linux platform for embedded systems at ELCE 2012. Abstract: Embedded Linux is at a cross roads where the combination of Moore’s law making devices more powerful and the mass production of consumer devices, especially mobile, making them cheaper means that the old ways no longer work. Only a few years ago we though in mega: MHz, MBytes, MBits/s. Now we have to think in giga. The days of the single core CPU are almost over, as are the days of the QVGA display. All this means that there is a need to re-think how embedded devices are programmed. Two obvious roads lie ahead: Android and Ubuntu (or other desktop operating system of your choice). This talk considers the […]

January 16, 2013January 16, 2013 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

FFSB and IOzone: File System Benchmarking Tools, Features and Internals – ELCE 2012

Keshava Munegowda and Sourav Poddar, software engineers at Texas Instruments, give a presentation about 2 relatively new file system benchmarks: The Flexible Filesystem Benchmark (FFSB ) and IOzone at the Embedded Linux Conference Europe 2012. Abstract: The IOzone is widely used File System Bench-marking tool in both linux and windows systems. The Flexible Filesystem Benchmark (FFSB) is a new cross-platform file-system performance measurement tool. It uses custom profiles as input to measure multiple file systems read/write performances. This paper identifies and compares these file system benchmarking tools in terms of the optimal usage techniques such as buffer size, number of threads, number of write blocks etc. Internals and features of these tools , and the necessary steps involved in the porting of benchmarking tools to different platforms are also discussed. The depicted file system benchmarking performance numbers, in this paper, are measured in both x86 PCs and ARM based SOC […]

January 16, 2013November 23, 2014 by Jean-Luc Aufranc (CNXSoft) - No Comments

Understanding PREEMPT_RT (The Real-Time Patch) – ELCE 2012

Steven Rostedt, working at Red Hat, talks about Real-Time Linux at the Embedded Linux Conference Europe, in Spain on November 6, 2012. Abstract: The real-time patch (which provides CONFIG_PREEMPT_RT), has been around since 2005. Started by Ingo Molnar and maintained by Thomas Gleixner and several others, it has grown from a hobby RTOS into a very serious contender. Several distributions (Red Hat, SuSE, Debian, Ubuntu) supply a kernel version that includes this patch. The embedded world has started adding the -rt patch to their own devices that they ship. But do the embedded developers understand what the -rt patch supplies? Programming for real time, and especially when writing kernel code requires special knowledge to avoid real time traps. This talk will explain what the real time patch provides and special programming tips that will ensure embedded developers will get the best from their devices. He goes through the following key […]

January 16, 2013 by Jean-Luc Aufranc (CNXSoft) - No Comments

Board Bringup: You, Me, and I2C – ELCE 2012

David Anders, embedded systems developer at Texas Instruments, explains how to work with I2C in Linux based embedded systems at ELCE 2012. Abstract: Board bring up is one of the most under documented aspects of embedded development. I2C is such a powerful, low-cost, and ubiquitous method of communication, that a basic understanding of it’s usage is essential to the embedded linux developer to quickly bring up and debug embedded designs. This presentation will look at the various software and hardware aspects of working with I2C using simple case studies highlighting the implementation of an EEPROM and a GPIO Expander. Most embedded Linux developers at some point in their career will be handed a piece of hardware that is untested. This presentation intends to provide some information about core tools and methods for bring up of I2C interfaces and assorted I2C based peripheral devices. David Anders has previously presented at Embedded […]