CNX Software - Embedded Systems News

November 16, 2017 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

STMicro Introduces Ultra-efficient STM32L4+ Series MCUs with Better Performance, Chrom-GRC Graphics Controller

STMicroelectronics has announced an upgrade to their STM32L4 series Cortex-M4 micro-controllers with STM32L4+ series upping the maximum frequency from 80 MHz to 120 MHz delivering up to 150 DMIPS (233 ULPMark-CP) , and ultra low power consumption as long as 33 nA in shutdown mode without RTC. The new family also adds Chrom-GRC graphics controller (GFXMMU) that can handle both circular and square TFT LCD displays together with a MIPI DSI interface and displayer controller, making it ideal for wearables, Chrom-ART 2D accelerator for better graphics performance, two Octo SPI interfaces, and more memory (640KB max) and storage (up to 2MB flash). If you want to know all differences between STM32L4 and STM32L4+, and/or learn how to use peripherals, STMicro has setup a nice free STM32L4+ online training page, which allow you to do just that either by downloading PDF documents, or following e-Presentations with slides and audio. STM32L4+ appears […]

November 16, 2017 by Jean-Luc Aufranc (CNXSoft) - 7 Comments

LEAGOO T5c Smartphone Features Spreadtrum SC9853i Octa-core Intel Airmont SoC

Intel is supposed to have left the mobile and IoT markets, but a few month ago, I wrote about Spreadtrum SC9861G-IA, an octa-core Intel Airmont SoC designed for LTE smartphones. Airmont is the microarchitecture used in Intel’s Cherry Trail and Braswell SoC, so the Spreadtrum SoC is not based on a new microarchitecture, but it still shows Intel decided to still use the technology, just not with their name on the processor. The news was published in February, but so far I have not seen any phone based on the processor. Instead, a similarly specced SoC, namely Spreatrum SC9853i, is now found in LEAGOO T5c 5.5″ smartphone with 3GB RAM and 32GB flash. LEAGOO T5c smartphone specifications: SoC – Spreatrum SC9853i octa-core Intel 64-bit Airmont “Cherry Trail-T” processor @ up to 1.8 GHz (14-nm FinFET process) System Memory – 3GB RAM Storage – 32GB eMMC flash Display – 5.5″ SHARP […]

November 16, 2017 by Jean-Luc Aufranc (CNXSoft) - 4 Comments

Meet the Blue Version of Raspberry Pi 3 Board, For Brazil Only

It’s always fun to buy electronics and gadgets from China, while there are sometimes technical “headaches”, they are mostly solvable and part of the fun. But in some cases, government regulations and customs ruin the party even before you get the device. Most of the time, it’s just in the form of unexpected custom duties, but other times, you may get a phone call asking you to get some documents… With experience, I’ve learned to give up at that point, but I tried one before… The courier will usually not tell you exactly what you need, just some clues, so I’ll have to make a few phone calls… After 8 phone calls to different government officers, I discovered that I needed a document saying I do not need document… Hooray! But sadly, it could not be done over the phone, online, or by snail mail, I would have to go […]

November 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 19 Comments

Allwinner H6 Datasheet and User Manual Released

Putting aside the ill-fated Allwinner A80 SoC, Allwinner H6 is the first Allwinner processor with multiple high speed interfaces such as Gigabit Ethernet, USB 3.0 and PCIe, and also support 4K HDR with the company’s Smart Color Engine for video processing. So far, it’s been found in some 4K HDR TV boxes such as Zidoo H6 Pro or Beelink GS1. We’ve already known Shenzhen Xunlong was working on Orange Pi 3 Plus board with the processor for a few months, but Pine64 appear to have joined the party, and will soon launch Pine64 H64 board according to their Wiki. No photos yet, but the company released various documents for the board including Allwinner H6 V200 datasheet (80 pages), and Allwinner H6 V200 user manual (965 pages). The documents should – for instance – allow sunxi-linux community to port drivers for the processor. Some corrections have been made to the first […]

November 15, 2017November 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 13 Comments

QNAP QBoat Sunny IoT Mini Server Board Officially Announced with Annapurna Labs AL-314 ARM Processor

We first had a glance at QNAP QBoat Sunny at CES 2017. At the time, QNAP IoT development board was powered by an Intel AnyWAN GRX750 dual core Atom based processor with 2GB RAM, 4GB flash, three Gigabit Ethernet ports, some mSATA slot and so on. The company has now officially announced the board, but with a twist, as the Intel processor has been replaced by Annapurna Labs (now part of Amazon) AL-314 quad core ARM Cortex-15 processor instead, and left most of the other features pretty much unchanged. QBoard Sunny board specifications: Processor – Annapurna Labs AL-314 quad core ARM Cortex-15 processor up to 1.7 GHz System Memory – 2GB DDR3L Storage – 512MB NAND flash, 2x M.2 2260/2280 SATA slots for SSDs (Key M) Network connectivity – 3x Gigabit Ethernet USB – 2x USB 3.1 Gen1 ports Audio – 3.5mm audio out jack, 3.5mm audio in jack Expansion […]

November 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

TECHBASE ModBerry M300 Linux IoT Gateway is Powered by NanoPi NEO Board

We’ve previously covered TECHBASE Modberry industrial automation gateways based on popular development boards such as Raspberry Pi 3, NanoPi M1 Plus, and Intel Cherry Trail’s UP board, and designed for applications such as PLC controllers or MODBUS gateway / router. The company has now launched a new version with Modberry M300 powered NanoPi NEO Allwinner H3 board. ModBerry M300 gateway specifications: SoC – Allwinner H3 quad core Cortex A7 @ 1.2 GHz with an ARM Mali-400MP2 GPU System Memory – 512 MB DDR3 RAM Storage – micro SDHC card slot Connectivity 10/100M Ethernet port Optional Wi-Fi (IEEE 802.11 b/g/n, speed up to 150 Mbps, 64/128-bit WEP, WPA, WPA2), LTE/3G modem, GPS module, ZigBee, Bluetooth, LoRa, Wireless M-Bus, Nb-IoT USB – 1x USB 2.0 host port, 2x USB 2.0 host header Expansion I/Os 2x DIO ports 1x RS-232, 1x RS-485 1x 2-pin mBus master for up to 10 slave devices Optional […]

November 15, 2017November 17, 2018 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Xiaomi Mi A1 Smartphone Review – Part 2: Android 7.1.2 Firmware

Google recently announced several Android One smartphones, which are supposed to get 2 years of firmware updates, including to the latest version of Android, such as HTC U11 Life and Android One Moto X4. Many of those phones are limited to some specific countries, but Xiaomi Mi A1 will be launched in over 40 countries, and thanks to Chinese online shops is really available worldwide. GearBest sent me the latter last month, and in the first part of Xiaomi Mi A1 review I simply went through unboxing, booted the phone, perform an OTA update, and ran Antutu 6.x on the phone for a quick estimate of performance. Since then, I’ve had around four weeks to play with the smartphone running Android 7.1.2 (still), so I’m ready to report my experience in the second part of the review. General Impressions In the past year, I used Vernee Apollo Lite smartphone powered […]

November 15, 2017November 15, 2017 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

$9+ Libre Computer Tritium Allwinner H2+/H3/H5 SBCs Leverage Raspberry Pi 3 Form Factor (Crowdfunding)

A few months ago, Libre Computer introduced Le Potato board (aka AML-S905X-CC) powered by Amlogic S905X processor plus up to 2GB RAM, and using Raspberry Pi 3 form factor. The company is now back with three Tritium boards, using the same form factor, but instead powered by Allwinner H2+, H3, or H5 processors, with a lower price point as the Tritium IoT board (H2+ / 512 MB RAM) goes for $9 only. Tritium boards (ALL-H3-CC) specifications: SoC and Memory Tritium IoT – Allwinner H2+ quad core Cortex A7 processor with Mali-400MP2, 512MB DDR3 Tritium 1GB – Allwinner H3 quad core Cortex A7 processor with Mali-400MP2, 1GB DDR3 Tritium 2GB – Allwinner H5 quad core Cortex A53 processor with Mali-450MP4, 2GB DDR3 Storage – 1x micro SD Card slot, eMMC module connector Video & Audio Output Tritium IoT – HDMI up to 1080p60, AV port Tritium 1GB & 2GB – HDMI 1.4 […]