CNX Software - Embedded Systems News

August 5, 2016August 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

Intel Smartwatches are Hot! So Hot, They May Burn Your Skin

Low power in constrained spaces is a tricky business, even for ARM based SoCs with the Qualcomm 810 overheating saga a few months ago. Now it’s time for Intel to feel the heat, as the company has has to recall Basis Peak smartwatches / fitness trackers due to potential overheating causing skin burns. Josh Walden – senior vice president and general manager of the New Technology Group at Intel Corporation – stated: On behalf of the Basis Science team, I want to personally apologise for this situation, we know that many of you love using your Basis Peak watches and have made them part of your daily lives, and we are very sorry for the disruption this will cause you, we had hoped to update the software on your watch to address the problem, unfortunately, despite our best efforts, we aren’t able to develop such a solution without completely compromising […]

August 5, 2016 by Jean-Luc Aufranc (CNXSoft) - 1 Comment

Minimal Ubuntu 16.04 Image for ODROID-C2, and C1/C1+ Boards, Ubuntu Core Image for Bubblegum-96 Board

If you’ve been wanting minimal Ubuntu distributions for your server, IoT, or other headless projects, there are some good news from Hardkernel with the release of a minimal Ubuntu 16.04 image for ODROID-C2 and ODROID-C1+ boards, and Canonical has recently announced Actions Semi S900 based BubbleGum-96 board was getting support for Ubuntu Core distribution. If you’re using an ODROID board you can download ubuntu64-16.04-minimal-odroid-c2-20160803.img.xz (196MB) firmware, which become 1.7 GB once uncompressed and flash it 2GB or greater micro SD card. After Raspberry Pi 2 and Samsung Artik 5/10, Bubblegum-96 is the third officially supported board that can run Ubuntu Core. You can download the 3.63GB beta image and instructions to flash it from an Ubuntu 16.04 machine on Mega. Bugglegum-96 is a 96boards compliant development board based on an quad core Cortex A53 processor with 2GB RAM and 8GB flash manufactured and sold by ucRobotics for $89.

August 5, 2016May 8, 2024 by Jean-Luc Aufranc (CNXSoft) - 120 Comments

NEXBOX A95X (Amlogic S905X) TV Box Review – Part 2: Android 6.0 and Kodi 16.1

Last week I publish the first complete review of an Amlogic S905X device with MINI M8S II TV box review, and while the device work in a smooth and stable manner, some features did not work as expect such as HDMI audio pass-through. I’ve now had the change to compare it to another S905X with NEXBOX A95X, not to confuse with its “homonym”: NEXBOX A95X with Amlogic S905 processor. I’ve already taken pictures of the device and accessories, and checked out the hardware in the first part of the review, so today, I’ll report my finding playing with Android 6.0 firmware, Kodi video and audio capabilities, and check whether bugs and issues found on MINI M8S II are also present in the device. First Boot, Settings and First Impressions NEXBOX A95X is really a tiny device, so it’s no surprise that it only comes with two USB 2.0 ports, and […]

August 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 74 Comments

R-BOX Pro Octa-core Android TV Box Comes with 3GB RAM, Pre-sells for $83

The vast majority of TV boxes on the market only come with 1 or 2GB RAM, although some Rockchip RK3288 based devices ship with up to 4GB RAM, such as Nagrace HPH NT-V6, but so far the maximum I could see only 64-bit ARM platforms was 2GB RAM. R-BOX Pro changes that with an Amlogic S912 processor with 2 or 3GB RAM and 16GB flash. R-BOX Pro specifications: SoC – Amlogic S912 octo-core ARM Cortex A53 processor @ up to 2.0GHz with ARM Mali-820MP3 @ up to 750MHz System Memory – 2 or 3 GB DDR3 Storage – 16GB eMMC flash + micro SD slot up to 32GB Video Output – HDMI 2.0a with HDR and CEC support up to 4K @ 60 fps, and AV port for composite output Audio Output – HDMI, AV (stereo audio), and optical S/PDIF Video codecs – VP9-10 profile 2 up to 4K @ […]

August 4, 2016May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 9 Comments

Allwinner A64 based Pine A64 and Banana Pi M64 Boards Can Now Run Windows 10 IoT Core

Windows IoT is a version of Windows 10 that’s optimized for smaller devices with or without a display, and was fist released for Raspberry Pi 2 and MinnowBoard MAX. Since then a few more boards are now officially supported, including DragonBoard 410c, and Raspberry Pi 3. But there’s been some recent developments as two Allwinner A64 64-bit ARM boards are now supported according to two wiki entries (here and there) explaining how to run a simple Csharp sample on Windows 10 IoT Core on either Banana Pi M64 or Pine A64 boards. The guide shows how to configure Azure IoT Hub, register the IoT device, and build and deploy Azure IoT SDK on the board. But basically if all you want to is to run Windows IoT core on either board, you’ll need to download either: Windows 10 IoT Core for Banana Pi M64: Windows10IoT_BPI-M64.ffu (Link removed as Microsoft does […]

August 4, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Ubuntu 16.04.1 ISO Images Released for Intel Atom Bay Trail & Cherry Trail Compute Sticks

Canonical has recently released Ubuntu 16.04.1, which is now considered stable enough to update from Ubuntu 14.04.04 LTS, and while I could do that easily on my main machine using update-manager, upgrading to Ubuntu 16.04 on Intel Atom “Bay Trail” and “Cherry Trail” devices is a bit more complicated if you need audio & wireless networking (WiFi/Bluetooth) support since the kernel needs to be patched, and on top of that recent Linux kernels are not stable on such platforms without some extra hacks. Linuxium has done all the hard work, and created Ubuntu 16.04.1 ISO images for Intel Atom Compute Sticks with working audio, WiFi, Bluetooth, and “C-state” patchsets to avoid freezes. The images may also work on other devices, but this has not been tested so far. If you want to give it a try, you can download ubuntu-16.04.1-desktop-linuxium-ics.iso, and flash it to a USB drive with Rufus (Windows) […]

August 3, 2016 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

SolidRun ClearFog Base is a $90 Router/Networking Board with USB 3.0, M.2, mSATA, and Gigabit Ethernet Support

SolidRun introduced ClearFog Pro and Base board based on Marvell Armada 380/388 processor at the end of last year, but at the time, only the higher-end ClearFog Pro board was available for $170 and up. Now the company has officially launched the cheaper ClearFog Base board based on the same processor, two Gigabit Ethernet RJ45 ports, one SFP cage, a USB 3.0 port, an M.2 slot, mPCIe expansion slot, and more. ClearFog Base board specifications: Processor – Marvell ARMADA 388 (88F6828) dual core ARMv7 processor (Cortex A9 class) @ up to 1.6 GHz with 1MB L2 cache, NEON and FPU System Memory – 1GB RAM by default (2GB optional) Storage – 1x micro SD slot, optional 4GB eMMC flash, 1x M.2 slot, 1x mSATA/mPCIE Connectivity – 2x dedicated Gigabit Ethernet ports, 1x SFP cage USB – 1x USB 3.0 port Expansions 1x mini PCI Express slots (shared with mSATA ) 1x […]

August 3, 2016January 17, 2022 by Jean-Luc Aufranc (CNXSoft) - 15 Comments

What’s the Cheapest MCU? My Try: Holtek HT48R002 8-bit MCU Selling for $0.085

Somebody asked what was the cheapest MCU (Microcontroller) available on Google+, so I thought it would be fun to find the cheapest one regardless of specifications. It turns out there an older thread with this very question on StackExchange, and at the time (2011) Microchip PIC10F200 8-bit MCU with 256B RAM in SOP-23 package was the cheapest one among the answer, and somehow the price has not changed as it’s still $0.32 per unit for 1k orders. Not a bad price, but back in the days when I wrote on CD and DVD players, we had some price pressure from customers, so we looked for a cheaper microcontroller, and ended up using Holtek because of the competitive pricing. We suffered a bit during development due to incomplete documentation but eventually did the job. Anyway, I went to the Holtek website and found a “cost-effective I/O MCU” category, and HT48R002 appears […]