CNX Software - Embedded Systems News

December 17, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 2 Comments

ADBoard 3G/4G Digital Signage Board is Powered by Allwinner A83T Octa-Core Processor

MQMaker officially launched their WiTi router board earlier this week, but the company has also introduced ADBoard, an octa-core board specifically designed for digital signage with a connector for LVDS display including backlight, an RTC with backup battery, and a mini PCIe connector for 3G/4G connectivity combined with a SIM card slot. ADBoard specifications: SoC – Allwinner A83T octa-core ARM Cortex-A7 @ 2.0 GHz with PowerVR SGX544MP GPU @ 700 MHz supporting OpenGL ES 2.0/1.1, OpenCL 1.1, and DX 9.3. System Memory – 1 GB DDR3 Storage – 16 GB eMMC + micro SD slot Display Interfaces / Video Output HDMI up to 1080p60 with HDCP 1.2 and CEC support connector LVDS connector, LCD backlight control header and capacitive touch panel header Audio – HDMI, 3.5mm audio output, speaker connector, microphone connector Connectivity – Gigabit Ethernet, 802.11 b/g/n Wi-Fi and Bluetooth 4.0 USB – 1x USB 2.0 host port, 1x […]

December 17, 2015December 17, 2015 by Jean-Luc Aufranc (CNXSoft) - 6 Comments

Why Do UL and CE Certifications Matter For Anything That Connects to the Mains (110V/220V) ?

I’ve been featuring a few cheap automation appliances such as Orvibo Wiwo S20 WiFi smart socket or lately Sonoff & Slampher WiFi and RF switch and lightbulb adapter, and people mentioned that Wiwo S20 socket was unlikely to be compliant with CE up to 10A since it lacked the ground pin, and I was also informed that Sonoff & Slampher was probably not compliant with UL certifications. Why does not matter? The picture below may give a clue… UL and CE certifications are used to make sure the device complies with safety regulations, and in some case make also improve reliability, as in UL compliant power supplies will feature inexpensive TVS device to protect against thunder. And if you think you are covered because you have an house insurance, it’s quite likely it will be void if the on-site expert find a non-compliant device on the site of the fire. […]

December 16, 2015December 18, 2015 by Jean-Luc Aufranc (CNXSoft) - 5 Comments

SMA-Q e-Paper Smartwatch Unboxing and Details

When I first discovered SMA-Q smartwatch, I really found it interesting with its always-on color e-Paper display, Bluetooth 4.0 connectivity, heart rate monitor, and promise of 30-day battery life (standby) for just $56. GearBest send me one sample so that I can have a close look at this interesting smartwatch and fitness tracker. I’ll start by unboxing the watch, and checkout some details that were unclear in the specifications. I received it in a retail package that calls it SMA WATCH-Q instead of SMA-Q watch with a link to the official website. On one side we’ll get the specifications, all in Chinese, but even if you can read, it’s clear the watch supports Bluetooth 4.0 and Android 4.4+ IOS7.0+ as announced in the specs, and we also learned a 150mAh battery is included, and it’s compliant with IP65 ingrees protectin ratings meaning it’s “protected from total dust ingress and low […]

December 16, 2015December 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 22 Comments

Unboxing and Teardown of Eny EM95 4K Android TV Box with Front Panel LCD Display

Eny EM95 was first unveiled in early July, as the flow of Android TV boxes based on Amlogic S905 started. Eny Technology has now sent me a sample of this device with the typical 1GB RAM and 8GB Flash, but it adds an LCD display on the front panel. Today, I’ll take a few photos of the device, and open it to find more details about the hardware. Eny EM95 TV Box Unboxing I received the device by DHL in a colorful retail package referring to EM95 as a Quad core Smart TV box, with some specs on the back, which I already listed in my first post. The media player ships with a 5V/2A power supply, an IR remote control with IR learning function requiring two AAA batteries, an HDMI cable, and a user’s manual in English. The style of the box it’s pretty neat, and I usually like […]

December 16, 2015December 16, 2015 by Jean-Luc Aufranc (CNXSoft) - 3 Comments

Cube iwork8 Ultimate 8″ Tablet Powered by Intel Atom x5-Z8300 Sells for $89

While Intel Atom X5 mini PCs such as Tronsmart Ara X5 are selling well above $100, you can now pickup Cube iwork8 Ultimate tablet for just under $90 on GearBest [Update: Coupon IWORK8HI save a dollar more or so] with the same processor, memory, and storage, and adding an 8″ touchscreen, two cameras, and a battery, while losing Ethernet, and the convenience of full-sized USB and HDMI ports. Cube iwork8 Ultimate tablet specifications: SoC – Intel Atom x5-Z8300 “Cherry Trail” quad core processor @ 1.44 GHz / 1.84 GHz with Intel Gen8 HD graphics. System Memory – 2 GB RAM Storage – 32 GB eMMC flash + micro SD slot up to 32 GB Display – 8.0″ touchscreen display; 1280×800 resolution; 5-point multitouch Video Output – micro HDMI port Audio – HDMI, built-in microphone and dual speakers (although I can only see one speaker on the picture), 3.5mm headphone jack […]

December 16, 2015May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

$15 pcDuino3 Nano Lite Board Includes Gigabit Ethernet and a Real SATA Port

I often read people complain about the lack of SATA and Gigabit Ethernet on devices, and following up a discussion on a recent post about QNAP TAS-168 and TAS-268 NAS, I was made aware that pcDuino3 Nano board had a little brother without NAND Flash, nor an IR receiver that’s currently selling for $15 on Amazon US. pcDuino3 Nano Lite board specifications are exactly the same as the other version minus the stricken-through items: SoC – AllWinner A20 dual core ARM Cortex A7 @ 1.0 GHz with Mali 400MP2 GPU System Memory – 1GB DRAM Storage – 4GB NAND Flash, SATA connector and microSD card slot (up to 32GB) Video Output – HDMI 1.4 with HDCP support Audio Out – 3.5mm analog audio interface Connectivity – Gigabit Ethernet USB – 2x USB host, 1x USB OTG Expansion Headers – Arduino UNO extension interface with 14xGPIO, 2xPWM, 6xADC, 1xUART, 1xSPI, 1xI2C. […]

December 15, 2015December 19, 2015 by Jean-Luc Aufranc (CNXSoft) - 11 Comments

Aceberry S500 is a $60 Actions Semi S500 Development Board Comprised of a Module and a Baseboard

For some hard-to-explain reasons, Actions Semi S500 processor seems to be a popular choice for makers of boards, although I don’t think it has really been a success with hobbyists and makers so far. After ActDuino S500, LeMaker Guitar, Lemon Pi, Allo SPARKY, and Roseapple Pi boards, here comes another S500 quad core Cortex A9 development board with Aceberry S500 that’s quite inspired by LeMaker Guitar as seen by its baseboard and module design. Aceberry S500 board preliminary specifications: SoC – Actions Semi S500 quad core Cortex A9r4 processor @ 1.6GHz with PowerVR SGX544 GPU @ 500 MHz Memory – 1 GB DDR3 Storage – 8GB eMMC or NAND flash (16 and 32GB optional), SPI NOR flash Video Output – HDMI, and LCD connector Audio – HDMI, headset jack, digital output (RCA). Video Codec – H.265 (HEVC) and Ultra HD (4K*2K) video playback. Encoding up to 1080p@60fps. Connectivity – 10/100M […]

December 15, 2015November 21, 2018 by Jean-Luc Aufranc (CNXSoft) - 17 Comments

Microchip Introduces $11 RN2483 & RN2903 LoRa Modules and $70 LoRa Evaluation Kits for IoT & M2M Applications

LoRa is one of those long range low power WAN standards used for the machine to machine (M2M) and Internet of things (IoT) applications. I already featured a Semtech Lora module here with a line-of-sight range of up to 20 to 30km, and the company has just partnered with STMicro to deploy LoRa solutions, but today, I’m going to have a look at Microchip Lora modules and development kits that I discovered in the company’s Micro Solutions Nov/Dec 2015 publication. The company has launched two modules for the European and North American markets with respectively RN2483 LoRa 433/868 MHz R&TTE Directive Assessed Radio Modem and RN2903 915 MHz North American modem. Apart from the different frequencies, both modules have similar features: On-board LoRaWAN Class A protocol stack Tx/Rx Power RN2483 – 40 mA (14dBm, 868MHz) Tx, and 14.2 mA Rx @ 3.6V RN2903 – 124 mA Tx max, and 13.5 mA […]