Android News - Page 259 of 363 - CNX Software

April 13, 2014May 29, 2017 by Jean-Luc Aufranc (CNXSoft) - 12 Comments

Mixtile LOFT-Q Board and LOFT Kit mini PC Powered by AllWinner A31

Recently most development around AllWinner, at least for Linux, is focusing on AllWinner A20, and there are several AllWinner A20 board and development platforms available on the market such as Cubieboard2, A20-OLinuXino, IBOX and more. But apart from the team at Free Electrons, few people seem to be working on AllWinner A31, so there are few development platform available, if we exclude consumer products such as tablets and Android TV Boxes. There’s now an AllWinner A31 development board thanks to Mixtile LOFT-Q board, which also comes in LOFT Kit to make a complete mini PC with enclosure. Mixtile LOFT-Q specifications: SoC – Allwinner A31 quad core ARM Cortex-A7 processor with PowerVR SGX544 MP2 GPU System Memory – 2GB 64-bit DDR3 Storage – 8GB eMMC (ver 4.51), SATA III connector for 2.5″ drives, and SD card Slot Video Output – HDMI 1.4 up to 1080p Audio I/O – HDMI, 1 headphone/TOSLINK […]

April 13, 2014April 13, 2014 by Jean-Luc Aufranc (CNXSoft) - 18 Comments

MINIX Unveils NEO X8 and X8s Android TV Boxes Powered by Amlogic S802 & S802-H SoCs

MINIX has been providing Rockchip based Android TV boxes for a couple of years notably with their NEO X5 and NEO X7. They will now also offer devices powered by Amlogic with NEO X8 and NEO X8s respectively powered by S802 and S802-H quad core SoC. The advantage of the former is that it fully supports DTS and Dolby decoding and pass-through. Let go through the hardware specs of both devices: SoC NEO X8 – Amlogic S802 quad core cortex A9r4 @ 2 GHz with Mali-450MP6 GPU NEO X8s – Amlogic S802-H quad core cortex A9r4 @ 2 GHz with Mali-450MP6 GPU including Dolby and DTS support. System Memory – 2GB DDR3 Storage – 8GB (X8) / 16GB (X8s) eMMC + SD/MMC card reader Connectivity – 10/100M Ethernet, 802.11 b/g/n Wi-Fi, dual band support for X8s, Bluetooth 4.0 Video Output – HDMI 1.4b up to 4K @ 30 fps, with […]

April 12, 2014December 18, 2023 by Jean-Luc Aufranc (CNXSoft) - 41 Comments

Review of Tronsmart Vega S89 Elite Amlogic S802 TV Box

Tronsmart Vega S89 is an Android TV Box based on Amlogic quad-core Cortex A9 processor. You can refer to Tronsmart Vega S89 specs for more technical details, and check out my Tronsmart Vega S89 Unboxing post for pictures of the device and the board. As a reminder, there are two models of the device: Tronsmart Vega S89 with 16GB flash and dual-band Wi-Fi (AP6330 module), and Tronsmart Vega S89 Elite with 8GB flash and 2.4 WiFi (AP6220 module). I’ve been sent the Elite version, but both versions should have similar performance. I’ll start by giving my first impressions, going through the user interface and settings, then I’ll switch to video and audio tests, Wi-Fi performance, and perform some other tests for Bluetooth, gaming, external storage, USB webcam, etc.. trying to cover most of the hardware features available on this device. First Boot, Settings, and First Impressions Vega S89 (Elite) comes […]

April 11, 2014May 28, 2014 by Jean-Luc Aufranc (CNXSoft) - 31 Comments

Ugoos UT3 Rockchip RK3288 based Android TV Box (Board Pictures and Specs)

We’ve already seen RK3288 based Android TV boxes and sticks started to be advertised on Alibaba, and today Ugoos contacted me and shared some pictures and specs of their PCBA for Ugoos UT3 Android 4.4 TV box based on Rockchip RK3288 quad core Cortex A17 + Mali-T764 GPU SoC. Here are the specs of the board and product: SoC – Rockchip RK3288 quad core CortexA17 @ 1.8GHz + Mali-T764 GPU with support for OpenGL ES 1.1/2.0 /3.0, and OpenCL 1.1 System Memory – 2GB DDR3 (Option: 4GB) Storage – 8GB NAND Flash (Options: 16, 32 or 64GB) + micro SD card slot (up to 32 GB) Connectivity – 100M/1000M Ethernet, dual band WiFi 802.11 b/g/n (2.4GHz/5GHz) and 802.11 a/c using external Wi-Fi antenna, Bluetooth 4.0 (option?) Video I/F HDMI 1.4a output (female) up to 4k2k @ 30 fps, 1080p60 AV output (3.5mm jack) HDMI input (female) up to 1080p Audio I/F […]

April 9, 2014 by Jean-Luc Aufranc (CNXSoft) - 8 Comments

Tronsmart Vega S89 (Elite) Android 4.4 Media Player Unboxing

Last review, I wrote an unboxing post about M8, an Android TV Box powered by Amlogic S802 quad core Cortex A9r4 processor with a Mali-450MP6 GPU. I’m still waiting for the firmware to test this device. In the meantime, Geekbuying sent me Tronsmart Vega S89 (Click for full specs), another Android Kitkat TV box powered by S802. There are actually two versions: Tronsmart Vega S89 (16 GB Flash, dual band Wi-Fi), and Tronsmart Vega S89 Elite (8GB Flash, 2.4 GHz Wi-Fi) which is the model I received. I’ll write an unboxing post today with the device and the board, and test the firmware in the next few days. Tronsmart Vega S89 (Elite) Unboxing Geekbuying sent me the sample via DHL which I received in the package below. There are quite a few accessories included with the board. From left to right: IR remote control (2x AAA batteries not included), HDMI […]

April 9, 2014 by Jean-Luc Aufranc (CNXSoft) - 26 Comments

Rockchip RK3288 based Android Mini PCs and TV Boxes Are Starting to Show Up (Wholesale)

Rockchip RK3288 based devices should be available soon. At the end of last month, I read Pipo was about to introduce RK3288 Tablets at the Hong Kong electronics fair this month, and yesterday I’ve been informed some RK3288 mini PCs and TV Boxes had started to appear on Alibaba. RK3288 HDMI TV Dongle (D368) D368 mini PC is said to come with the following specs according to a product page on Alibaba: SoC – Rockchip RK3288 quad core ARM Cortex-A17 with Mali-T7xx 3D GPU (OpenGL ES 1.1/2.0 /3.0,and OpenCL 1.1) System Memory – 2GB DDR3 (Optional:1GB) Storage – 8GB NAND Flash (Options: 4GB and 16GB), micro SD card (up to 32GB) Video & Audio Output – HDMI 1.4a (Resolution 4K and 1080p60 support) Connectivity – Dual band Wi-Fi 802.11 b/g/n and 802.11ac, optional Bluetooth 4.0. Video Codecs Decode – H.265, MPEG-1, MPEG-2, MPEG-4,H.263, H.264, AVS, VC-1, RV, VP6/VP8, Sorenson Spark, MVC […]

April 8, 2014April 8, 2014 by Jean-Luc Aufranc (CNXSoft) - 16 Comments

PIPO X1 (Beta) Android TV Dongle Powered by Rockchip RK3188 Sells for $40

PIPO X1 is an HDMI TV Stick running Android 4.2 with more or less the same specs (2GB RAM, 8 GB Flash) as many other competiting products, but with a price much lower at $39.99 including shipping. The company however mentions the product is still in beta version, which may explain why it’s so cheap… Let’s have a look anyway. Pipo X1 specifications: SoC – Rockchip RK3188 quad core Cortex A9 @ 1.6GHz + Mali 400MP4 GPU System Memory – 2GB DDR3 Storage – 8GB + micro SD slot (up to 32GB) Video & Audio Output – HDMI Connectivity – Buil-int 802.11b/g/n Wi-Fi and Bluetooth 4.0 USB – USB 2.0 host + micro USB (for power) Dimensions – 100 x 40 x 8mm Weight – 30g The device ships with a micro USB cable. That means you’ll need to provide your own 5V/2A power adapter. The company also highlights […]

April 4, 2014April 25, 2014 by Jean-Luc Aufranc (CNXSoft) - 34 Comments

M8 Android TV Box Powered by AMLogic S802 (Unboxing)

Shenzhen Tomato Technology has send me a sample of their M8 Android TV Box based on the latest quad core AMLogic S802 processor which is said to run Android 4.4 Kitkat. In this post I’ll go through the specs, and show some pictures of the device, and internals. Later, I’ll write a full review with XBMC 13, which I’ve been told is pre-installed. I’ll also receive Tronsmart Vega S89 next week for unboxing and review. M8 Specifications M8 has more or less the same specs as other S802 Android TV boxes: SoC – AMLogic S802 quad core Cortex A9r4 processor @ 2GHz with Mali‐450MP6 GPU System Memory – 2GB DDR3 Storage – 8GB NAND flash + SD card slot Connectivity – 10/100M Ethernet, dual band Wi‐Fi (2.4GHz/5GHz), Bluetooth Video Output – HDMI 1.4b, AV. HDMI supports 1080p, 4K2K 30fps Audio Output – HDMI, AV, and optical S/PDIF Video Codecs and […]